Creating a Layout, Section and Elevation with dimensions using AutoCad
YOUR ANSWERS:
1 .AIM"To draw the plan and section of a building by using auto acd.
PROCEDURE:
- First open the autocad and set the units and limits as per the drawing requirements.
- Next go to layer command and create diffrent layers for different objects like walls ,windows,doors,texts dimension stairs,leader,etc
- Inabove drawing all the lines are drawn by using line command in the below command section.
- All the texts are written by using the text command.
- in above drawing all the dimensions are given by using the dim command
- trim command used to remove unwanted objects from drawing.
- Offset command is used to create the another object with same dimensions of the object selected.
- Leader command is used to write text and to specify the object .
- rectangular command is used to create or draw the windows
- centreline command used the lines between the two lines.
- Xline command is used to draw the sections elevations of a buldings.
COMMANDS USED IN THE ABOVE BELOW DRAWINGS ARE:
1.LINE COMMAND
2.TEXT COMMAND
3DIM COMMAND
4.TRIM COMMAND
5OFFSET COMMAND.
6.LEADER COMMAND
7.REC COMMAND
8.CENTRELINE
9.XLINE COMMAND.
AIM"To draw the plan and section of a building by using auto acd.
PROCEDURE:
- First open the autocad and set the units and limits as per the drawing requirements.
- Next go to layer command and create diffrent layers for different objects like walls ,windows,doors,texts dimension stairs,leader,etc
- Inabove drawing all the lines are drawn by using line command in the below command section.
- All the texts are written by using the text command.
- in above drawing all the dimensions are given by using the dim command
- trim command used to remove unwanted objects from drawing.
- Offset command is used to create the another object with same dimensions of the object selected.
- Leader command is used to write text and to specify the object .
- rectangular command is used to create or draw the windows
- centreline command used the lines between the two lines.
- Xline command is used to draw the sections elevations of a buldings.
COMMANDS USED IN THE ABOVE BELOW DRAWINGS ARE:
1.LINE COMMAND
2.TEXT COMMAND
3DIM COMMAND
4.TRIM COMMAND
5OFFSET COMMAND.
6.LEADER COMMAND
7.REC COMMAND
8.CENTRELINE
9.XLINE COMMAND.
AIM"To draw the plan and section of a building by using auto acd.
PROCEDURE:
- First open the autocad and set the units and limits as per the drawing requirements.
- Next go to layer command and create diffrent layers for different objects like walls ,windows,doors,texts dimension stairs,leader,etc
- Inabove drawing all the lines are drawn by using line command in the below command section.
- All the texts are written by using the text command.
- in above drawing all the dimensions are given by using the dim command
- trim command used to remove unwanted objects from drawing.
- Offset command is used to create the another object with same dimensions of the object selected.
- Leader command is used to write text and to specify the object .
- rectangular command is used to create or draw the windows
- centreline command used the lines between the two lines.
- Xline command is used to draw the sections elevations of a buldings.
COMMANDS USED IN THE ABOVE BELOW DRAWINGS ARE:
1.LINE COMMAND
2.TEXT COMMAND
3DIM COMMAND
4.TRIM COMMAND
5OFFSET COMMAND.
6.LEADER COMMAND
7.REC COMMAND
8.CENTRELINE
9.XLINE COMMAND.
