Creating a Floor plan, Footing detail and Isometric view using AutoCad

Aim of the Project :- Drafting of first floor plan of Plot Size 26'*41' With Facilitating with WC, Bathroom and 2 Bedrooms and Staircase

Procedure -:

Start Autocad 2020

Command UN for unit setup and i set the units in inches

Than command LINE choosen and draw a Line with cordinates 0,0 with length of 13' in X direction

Again Line command with 13' in X direction.

Now skecth a line from 0,0 in Y direction and with given length 41'

than Copy this line with base point taken from 0,0 with distance 26' in x direction

than Command Line and draw line from cordinates 0,41 to 26,41

Now Offset command used for all outer line with 9" distance to create wall thickness.

Than Take offset command and select the line of 0,41 to 26,41 and offset it with 12' in downward direction

Than Select offseted line and again offset the line with 5" to make the inner wall thickness.

This process again repeated for the skeching wall of hall and porch you can see in the plan.

Now For WC and Bathroom Line Command used and also offfset command

For making the windom and door i Draw the line of 2'6" in X and 2'6" in y With joining both with same point and Draw a circles from that point with Radius 2'6" .

Than TRIM command used to delete remaining Portion

Also for double door domensions taken 3' with 1'6" circle radius and trim command used

For staircase Line command used and offset command to draw treads of 10' by offset

and Aero Drawn By Pline command At a Place with orthomode on and Move on the Staircase.

Than for putting text multilinear text option is used one time and Copy it to all rooms and places and edit them at the place

Also Text Height Increased as suitable.