Challenge 6 : Concept Modeling of Side Fender
Modelling of SIDE FENDER
1.OBJECTIVE -Modelling of Side fender.
2.INTRODUCTION - Build a side fender.
METHODLOGY
import an image into canvas image.
⛛
draw a curve as per blue print.
⛛
assign curves to layers.
⛛
build surface on wireframe
⛛
intersect the surface & trim the unwanted surface.
⛛
apply fillet on edges.
4.DESCRIPTION - 1. Draw a curve as per blue print.
Using tools for wireframe -a) cv crv tool.
b) bend tool.
c) line tool.
2.Build a surface on finished wireframe.
using tool for surface -a) skin tool.
b) rail tool.
c) square tool.
d) ms draft tool.
e) surface fillet control.
3. using tools for curves in object edit
using tools in object edit -a) detach tool used for single surface divide into multi surfaces.
b) align tool used for aligning the two surfaces.
4. using tools for surfaces in surface edit.
using tool in surface edit -a) project & intersect tool
b) trim & untrim tools
5. using shade for surface on diagnostic shade
VIEWS
1.learn a build surface on wire frame.
2.learn about how to use the multi surface draft tool.
3. learn a how to intersect & trim the surface.
4.how to align the surfaces with align tool
CAR HOOD
1.OBJECTIVE -Modelling of car hood .
2.INTRODUCTION - Build a car hood.
METHODLOGY
import an image into canvas image.
⛛
draw a curve as per blue print.
⛛
assign curves to layers.
⛛
build surface on wireframe
⛛
project the surface & trim the unwanted surface.
⛛
apply fillet on edges.
⛛
symmetry the surface
4.DESCRIPTION - 1. Draw a curve as per blue print.
Using tools for wireframe -a) cv crv tool.
b) bend tool.
c) line tool.
2.Build a surface on finished wireframe.
using tool for surface -a) skin tool.
b) rail tool.
c)square tool.
d)surface fillet control
3. using tools for surfaces in surface edit
using tool in surface edit -a) project surface.
b) trim the unwanted surface.
4. using shade for surface on diagnostic shade
VIEWS
1.learn a build surface on wire frame.
2.learn about how to use the multi surface draft tool.
3. learn a how to project & trim the surface.