Assignment 1

OBJECTIVE:

*To auto clean up the surface and extract the mid surface of the componenet and mesh the model and obatain the component that meets the described quality criteria.

Procedure:
*Import the model using the import geometry option and select the file to import.
*Select the surface and do auto clean up if any unevenness still found then cleanup manually.
*Extract the mid surface by selecting the closed component surfaces.
*Now toggle the lines were the quality criteria cannot be achieved and select the surface to mesh and select the element type and size to mesh.
*Mesh the surfaces and use the cleanup tools from quality cleanup panel.
*Node optimization,drag Tria,place node are some of the cleanup tools that are helpful for the model to achieve the quality index as described.
*Save the file that is achieved as per quality standard.
*similarly the other components are to meshed and make to meet the quality standard as described.
*Note:
*some the hole DIA above 5 mm are neglected and filled with filler surface.
*The elements which cannot be met for min. element length can considered because adjusting the min element at holes are difficult.

Result:
The extraction of mid surfaces and performing the cleanup and obtaining the meshed surfaces which are made to meet the quality criteria as described.

https://1drv.ms/u/s!Av1WlNmjfvAwgwENOqA0ZXm2bPY_?e=04ac36

NOTE:Images are attached in the link itself fyi.