Advanced Sheet Metal Design Using NX Cad Challenge_6_Bracket
Title:
NX Bracket
Objective:
The objective is to design a Bracket using Siemens NX sheet metal application.
Introduction:
Here we are going to design a Bracket , it is a sheet metal component. The Bracket can be created in any shape . And it can also created by using Siemens NX sheet metal application.
Design Methodology:
The process gone through while designing.
Step1: Draw a sketch in XY plane (Top view).
Step2: Add a contour flange feature to it with inputs of 200 mm width and thickness of 3mm.
Step3: Now draw a sketch in front plane ,XZ plane.
Step4: perform normal cutout feature with depth 35mm.
Step5: select four corners and perform break corner of radius 25mm.
Step6: Select inside edge of cut section and give 30mm radius of break corner feature.
Step7: Again add break corner feature for outside edge of model and give 60mm radius.
Step8: Draw a line sketch to perform a bead feature.
Step9: Do unbend
Step10: perform bead of 7mm depth and radius.
Step11: Now rebend
Step12: Add a sketch of points in front view plane.
Step13: perform a hole feature of diameter 20mm.
Step14: Finally add flat pattern and do Drafting.
The process is completed.
Features used in the designing
Different views of the Box Assembly.
Isometric view
Front view
Top view
Right view
Drafting Images:
Therefore the designing and drafting of Bracket is completed.