Advanced Sheet Metal Design Using NX Cad Challenge_5_Odd Shaped Enclosure

Title of the Project: sheet metal design using NX CAD

Objective: To design a ODD SHAPE ENCLOSER.

Introduction: Sheet metal tool is used to desgin sheet metal objects. sheet metal is one of the fundamental from used for sheet metal works,and in this tool wecan used various number of functions and with those functions are used to model odd shapes,and neutral shapes.

Methodology:

Commands used:

sketch: Its a basic 2d sketch to any design.

solid moduling:Solid modeling is a consistent set of principles for mathematical and computer modeling of three-dimensional solids.

convert to sheet metal: it convert the solid model to sheet metal.

flange:Adds a flange at an angle to a plannar face and adds a bends between the two faces.

bead: Lifts material along the contour of a sketch that simulates a stamping tool, creates a solid using a path and cross section shape.

jog:Modifies the model by lifting one side of a sketch line, adding a flange between the two lines.

rebend:Restore an unbend feature to its previous bent stage , along with any feature added after the unbend feature.

unbend:Flattens a bend and the material adjacent to the bend

flat patten:Create a flate patten feature from the formed sheet metal parts.

view orientation:

front view:

top view:

bottom view:

isometric view:

Feature tree:

drafting:

Conclusion

hence leaned in this how to convert solid modeling and perform the tool in efficient.