Chassis Engine

CHASSIS

Key commands : Boss extrude, Project curve, Fillet, Split tool, Champer.

Step 1 : Use sketch picture & extract file & name it blue print chassis

Step 2: Create a profile with required dimensions and apply project curve to create a complex 3d curve & apply sweep command

Step 3: Mirror it

Step 4: Apply split command

Step5 : Create a profile for mount & apply boss extrude and apply mirror command

Step 6: Create a profile for base and extrude it

Step 7 : create a plane for fuel tank .

ENGINE

Key Commands : Sketch Picture, Boss extrude, Fillet, Revolve, Extrude Cut, Mirror bodies, Curve generation, Projected curve, Complex curve, Swept

Engine:

Step 1 : Choose a Reference plane and extract sketch using sketch picture and apply regular dimensions to get reference point.

Step 2: create a sketch for crank case and apply extrude and fillet

Step 3: Create a planes and sketch for alternator, sprocket, and apply fillets

Step 4 : Create a plane & sketch for engine and apply extrude along with draft and apply extrude cut after creating a necessary profile for extrude cut and apply fillets.

Step 5 : Apply split tool and apply mirror bodies

Exhaust:

Step 1: Create a Profile for exhaust pipe

Step 2: use necessary planes & create a complex 3d curve using project curves & compound curve make pierce with geometry &apply sweep command.

Step 3: Do the same process for the second cylinder also

Note: use construction geometry & convert entities while creating a complex 3d curve.