3D Creation of Celing, Roof, Architectural plan, Structural plan, Sectional view, Elevation view and Camera specific view for a house plan using REVIT

1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level

ANSWER:-

STEP1:-

OPEN ARCHITECTURE TAB AND SELECT THE CEILING OPTION AND SELECT THE PIC LINE OPTION AND SELECT THE OUTER LINES OF THE WALLS ARE SELECT AND CLICK RIGHT MARK.

RESULT:-

2) Model a roof above the ceiling by selecting the footprints of the ceiling. Using the adjustment toolbars appearing on-screen adjust the roof slope to 10 degrees

ANSWERS:-

STEP 1:-

OPEN ARCHITECTURE TAB AND SELECT THE CEILING OPTION AND SELECT THE PIC LINE OPTION AND SELECT THE OUTER LINES OF THE WALLS ARE SELECT AND CLICK RIGHT MARK.

STEP 2:-

THEN WE INCREASE are decrease the roof the use dailogue box use edit in scale option.

RESULT:-

3) Using the file saved from weeks 2 to 4, create plan views for ground floor level and first-floor level including all the walls, floors, and components. Separate them to
architecture and structural plans

ANSWERS:-

STEP 1:-

OPEN ARCHITECTURE TAB AND SELECT THE CEILING OPTION AND SELECT THE PIC LINE OPTION AND SELECT THE OUTER LINES OF THE WALLS ARE SELECT AND CLICK RIGHT MARK.

STEP 2:-

• THEN WE INCREASE are decrease the roof the use dailogue box use edit in scale option.
• select the view option select the plan view and what view want.

RESULT:-

a. Architecture plan must have walls, floors, and all the components placed within the building

b. Structure plan must have details of only walls, floors, and columns

4) Using annotate toolbar add dimensions to all the walls and floors with reference to the longitudinal and transverse grids created in the project file

ANSWERS:-

STEP 1:-

OPEN ARCHITECTURE TAB AND SELECT THE CEILING OPTION AND SELECT THE PIC LINE OPTION AND SELECT THE OUTER LINES OF THE WALLS ARE SELECT AND CLICK RIGHT MARK.

STEP 2:-

• THEN WE INCREASE are decrease the roof the use dailogue box use edit in scale option.
• select the view option select the plan view and what view want.
• use annotate tab give dimensions to the plan.

RESULT:-

a. The architecture plan dimensions include details on where the components are placed within the buildings with relation to grids. Overall dimensions are sufficient for architecture plans

b. The Structure plan dimensions must include details on the position of all the walls and interior walls with reference to grids. Locate all the framing components of the building with reference to a fixed point using Structural plans

5) Create a sheet template from the view tab and adjust the parameters on the sheet to add appropriate views

ANSWERS:-

STEP 1:-

OPEN ARCHITECTURE TAB AND SELECT THE CEILING OPTION AND SELECT THE PIC LINE OPTION AND SELECT THE OUTER LINES OF THE WALLS ARE SELECT AND CLICK RIGHT MARK.

STEP 2:-

• THEN WE INCREASE are decrease the roof the use dailogue box use edit in scale option.
• select the view option select the plan view and what view want.
• use annotate tab give dimensions to the plan.
• use view tab and select the sheet and want view want select and drag it.
• use dailogue box adjust the size.

RESULT:-

6) Using the elevation tab create the elevation views, looking at your building from East, North, South, and West

ANSWERS:-

STEP 1:-

OPEN ARCHITECTURE TAB AND SELECT THE CEILING OPTION AND SELECT THE PIC LINE OPTION AND SELECT THE OUTER LINES OF THE WALLS ARE SELECT AND CLICK RIGHT MARK.

STEP 2:-

• THEN WE INCREASE are decrease the roof the use dailogue box use edit in scale option.
• select the view option select the plan view and what view want.
• use annotate tab give dimensions to the plan.
• use view tab and select the sheet and want view want select and drag it.
• use dailogue box adjust the size.

RESULT:-

7) Produce section cut through each room either cutting across longitudinally or in a transverse direction

ANSWERS:-

STEP 1:-

OPEN ARCHITECTURE TAB AND SELECT THE CEILING OPTION AND SELECT THE PIC LINE OPTION AND SELECT THE OUTER LINES OF THE WALLS ARE SELECT AND CLICK RIGHT MARK.

STEP 2:-

• THEN WE INCREASE are decrease the roof the use dailogue box use edit in scale option.
• select the view option select the plan view and what view want.
• use annotate tab give dimensions to the plan.
• use view tab and select the sheet and want view want select and drag it.
• use dailogue box adjust the size.

RESULT:-

8) Classify the views, Plan Views, Section Views, and Elevation views to either Design or Documentation category using Properties browser

ANSWERS:-

STEP 1:-

OPEN ARCHITECTURE TAB AND SELECT THE CEILING OPTION AND SELECT THE PIC LINE OPTION AND SELECT THE OUTER LINES OF THE WALLS ARE SELECT AND CLICK RIGHT MARK.

STEP 2:-

• THEN WE INCREASE are decrease the roof the use dailogue box use edit in scale option.
• select the view option select the plan view and what view want.
• use annotate tab give dimensions to the plan.
• use view tab and select the sheet and want view want select and drag it.
• use dailogue box adjust the size.

RESULT:-

9) Using the sheet template produced create multiple sheets as follows
a. A 101- Ground Floor Architecture Plan
b. A 102- First Floor Architecture Plan
c. A 103- Roof Plan
d. S 101- Ground Floor Structural Plan
e. S 102- First Floor Structural Plan
f. S 103- Roof Framing Plan
g. A-201- North-South Elevations
h. A-202- East-West Elevations

Add additional sheets based on the sections created in your Revit file

ANSWERS:-

STEP 1:-

OPEN ARCHITECTURE TAB AND SELECT THE CEILING OPTION AND SELECT THE PIC LINE OPTION AND SELECT THE OUTER LINES OF THE WALLS ARE SELECT AND CLICK RIGHT MARK.

STEP 2:-

• THEN WE INCREASE are decrease the roof the use dailogue box use edit in scale option.
• select the view option select the plan view and what view want.
• use annotate tab give dimensions to the plan.
• use view tab and select the sheet and want view want select and drag it.
• use dailogue box adjust the size.

RESULT:-

10) Create a camera-specific view or a 3D view in each room ( living, dining, bedroom). Based on the views create a new set of sheets starting A-501 (you can add as many sheets after, 502, 503.. n)to place the 3D view images. Produce the sheets as a part of project drafting.

ANSWERS:-

STEP 1:-

OPEN ARCHITECTURE TAB AND SELECT THE CEILING OPTION AND SELECT THE PIC LINE OPTION AND SELECT THE OUTER LINES OF THE WALLS ARE SELECT AND CLICK RIGHT MARK.

STEP 2:-

• THEN WE INCREASE are decrease the roof the use dailogue box use edit in scale option.
• select the view option select the plan view and what view want.
• use annotate tab give dimensions to the plan.
• use view tab and select the sheet and want view want select and drag it.
• use dailogue box adjust the size.
• use view option and select the camera view and the place camera want view want.

RESULT:-