MIX DESIGN for M35 GRADE CONCRETE USING FLYASH i) a. Grade designation : M35 b. Type of cement :OPC 43 grade conforming to IS 8112 c. Type of mineral admixture:Flyash conforming to IS3812 (part 1) d.Maximum nominal size of aggregate : 20mm e.Minimum cement content : 320 kg/mm^3 (from table of IS456:2000-exposure) f. Maximum…

1.  Residence Plan:Layout plan for a residence    In the above plan   1. We used construction lines  2. Layers and its properties 3. Different types of lines i.e dash --- lines for stair case 4. Text 5. gradient (solid fill) is also used   Layers used:       2.  Seating…

  Sketch a G+1 floor residential plan, according to Vastu shastra, and list down the names of the structural drawings required to be provided to the site for construction. Also, assume the sizes of the structural elements (Column, Beam, Slab, etc.,) and accordingly calculate the individual corresponding loads from…

1.  COLUMN SCHEDULE  AIM: To prepare the column schedule PROCEDURE: CREATING TABLE: - Create rectangle of 60'X20' explode it. - Divide the 60' into 10 columns and again divide each 10' to 5' by using offset command. Command "O" - select the left side and give offset distance as 10' first and for second as 5'.…

1. AIM:          To Create a Cabinet drawing by using Autocad     INTRODUCTION:      -  To Create a Cabinet drawing by using a various command.      -  Now we see the Step by Step Procedure to create a Drawing.   CABINET DRAWING:  …

1. Create the Plan and Sections as shown in the Figures. Use proper dimension techniques and dimension styles to document the project. Assume the sizes of the doors and windows as per construction standards. Refer to sections for stair details if required. INTRODUCTION: DIMENSIONING IN AUTOCAD: - AutoCAD provides a whole…