#include <stdbool.h>#include <stdio.h>#include <stdlib.h>// Link list nodestruct Node { int data; struct Node* next;};//function declarationvoid push(struct Node** head_ref, int new_data);int isPresent(struct Node* head, int data);// Function to get union of two linked lists head1 and head2struct Node*…

Project 2 - Implement the Code for controlling the retraction and extension of Airplane’s landing gear. Answer:-r. Landing Gear of an Airplane:- It is the undercarriage of an airplane, which is used for either take off or landing. It was also formerly called alighting gear by some manufacturers, such as the Glenn…

Project 1 - Interfacing a 16*2 LCD with Arduino using I2C protocol. Ans- Below image of two arduino connect. one is work as a master and second is slave. Arduino(Master) connect potentiomenter(Analog Input) connected to analog A1 pin. and 16x2 LCD conncected to arduino 2(slave).   Arduino1(master) sends pot value…

#include<stdio.h>#include<stdbool.h>#include<stdlib.h>       //use standards libraries// Link list node         //create structure for nodestruct Node { int data;                   //data in int form struct…

Project 1 - Interfacing a 16*2 LCD with Arduino using I2C protocol. Ans- Below image of two arduino connect. one is work as a master and second is slave. Arduino(Master) connect potentiomenter(Analog Input) connected to analog A1 pin. and 16x2 LCD conncected to arduino 2(slave).   Arduino1(master) sends pot value…

Project 1 - Interfacing a 16*2 LCD with Arduino using I2C protocol. Ans- Below image of two arduino connect. one is work as a master and second is slave. Arduino(Master) connect potentiomenter(Analog Input) connected to analog A1 pin. and 16x2 LCD conncected to arduino 2(slave).   Arduino1(master) sends pot value…

Measuring the distance of an object using ultrasonic sensor and also smoothen the sensor data using moving average filter. Ans-   Overview of the Project:  In this project the implementation of code for “Measuring distance of an object using ultrasonic distance sensor (28015 Ping) and also smoothen the…

Project 1 - Controlling a DC motor using PWM and monitoring its Running status. ans- Configuring Timer0 for PWM generation It is simple to configure PWM mode in Timer. We just need to set some bits in the TCCR0 register. TCCR0: Timer Counter Control Register 0   Bit 7- FOC0: Force compare match Write only bit,…

Aim: To implement code for “Measuring distance of an object using ultrasonic distance sensor (HC-SR04). Objective: Measuring the distance of an object using Ultrasonic Distance Sensor (HC-SR04) Usage of Input Capture Mode Highlights: Measuring the distance travelled by the wave to the object and gets bounced back…

Build an object-oriented library which can be used to track automobile maintenance. There can be different car types such as petrol, diesel, gas, electric etc., This library should be able to support at least three of the car types.  Maintenance tasks include activities like oil change or replace oil filter, replace…

Write a Test plan to test features of a new mobile phone (Blackbox test) that needs to be implemented based on the following requirements. (The product is still under development stage and is yet to be UA (User Acceptance ) tested .Every other thing to be included in the test plan can be hypothetical.  US-1:As a Product…

Perform Static Code Review Analysis for “C:\**\LDRA_workarea\Examples\C_Testbed_examples\Testrain\Testrain.c” Generate Code review report and upload them.  Ans- step 1: start LDRA TBrun. step 2: From the LDRA page select source->single file->LDRA_workarea->examples->C_Testbed_examples->Testrain->Testrain.c->open.(in…