1st Answer Aim : Create a new project and name the project. Tools used :  ~ File toolbar ~ project icon Procedure : ~ Click the file tool bar beside the architecture tool bar. ~ When you click the new bar in the file toolbar we get an project option. ~ Once you press project option you have to choose architecturial…

1. Building Information Modeling (BIM) is an intelligent 3D model-based process that gives architecture, engineering, and construction (AEC) professionals the insight and tools to more efficiently plan, design, construct, and manage buildings and infrastructure. Early detection of a collision. Faster design and…

1) Use the project file created from Week 2. Use it for this assignment. Based on yourlayout from week 2, using the floor tool under the architecture tab and select the floor withappropriate material and thickness using the property browser create a layout in theGround floor level. Align the floor plan with grids created…

1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level ans) Aim: To proceed from the First Floor Level.Model a Ceiling from the architecture tab above the walls at the first-floor level. Tools used: architecture…

1) Why are building codes or standards essential for the modeling/ efficiency of drawings in Revit? ans)building codes give us certain rules to be followed in the planning by specifying certain limits by taking various things into consideration. By following the building code there will be more chances of the plan being…

  1) Open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project ans) Aim: To open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project Tools Used:manage;architecture;grid;collaborate Procedure:1)from…

Create a G+4 Residential building as per NBC standards and make it a central model file. Your model should contain: ans) Aim: To create a G+4 Residential building as per NBC standards and make it a central model file. Your model should contain Tools Used: 1. collaborate 2. save Procedure: 1)click collaborate 2) click ok…

1) Select the type of structure you want to build from one of the three below a. Multi-Unit Residential Apartment b. Office Buildings c. school ans) I chose Office Building __________________________________________________________________________________________________________________________________________________________…

1) What are the HVAC systems? Why are they essential in the modeling buildings ans) HVAC stands for heating, ventilation, and air conditioning. This provides heating and cooling to kind of buildings. These systems use fresh air from the outdoors to provide high indoor air quality. The Vin HVAC, or ventilation, is the process…

1) Use the shortcut keys in Revit discussed in class to complete the following tasks and list them below a. Using a 3D model create a section box b. To create similar doors and windows in a floor plan layout c. To reduce the thickness of lines visible in plan views d. To apply override settings to a floor in the model…

1) Using Dynamo creates a set of sinusoidal points and create a curve and creates a surface out of the curve. Aim:To create the set of sinusoidal points, a curve, and a surface out of the curve using dynamo. Tools used:* Dynamo* Points* Curve* Loft Procedure:Step 1:1) Open a Dynamo tool by clicking the manage tab in the…

1) Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in class Aim: To Exporting the Revit architecture and structure model to the Navisworks Cache file as discussed in the video.…

Q1. Summarize the user interface in TSD with the for the following items: -   Project Workspace – How to access and usage    Scene Content – Demonstrate the use of scene content    Create two scene views   Loading drop list- How to access    Properties windows –…

1.Create column properties for different types of pedestal members and model in the grids created as per the assignment 1Ans)Aim: To create column properties for different types of pedestal members and model in the grids created as per the assignment 1Tools Required:-> Levels-> Manage Properties -> New -> Members…

1.Create beam properties for First floor and model the beams.Ans)Aim: To create beam properties for First floor and model the beams.Tools Required:-> Levels-> Manage Properties -> New -> Members -> Steel Beam.-> Grids-> Beams-> Properties tab.-> ValidateProcedure:• Firstly open the software…

1.Calculate dead load in design report based on IS code and apply dead load on the model• Finishes of 50mm• Slab as per design• Brickwall 150mm thickness• Roofing load based on purlin size• Ceiling loading 0f 0.3KN per sq m Ans)Aim: To calculate dead load in design report based on IS code and apply…

Q1 ) Generate manual wind loading in the design report based IS code as per the following input• Basic wind speed = 39m/s• Terrain category 2ANS 1 :AIM: Generate manual wind loading in the design report based IS code as per the following input TOOLS USED :• Excel.• IS codes.• Calculator. PROCEDURE…

1.Summarize your study for the bending moment, shear force and deflection diagrams for the elements of the model. Ans) Bending Moment: It refers to the internal rotational moments that cause a section to bend. In the case of a beam, it can be calculated as the algebraic sum of the moments about the section of…

QUESTION ) Analyze and design a steel building to 10T CRANE as per IS standard code in TEKLA STRUCTURAL DESIGNER. Refer the attached plan and elevation. Provide bracings and moment connection for lateral stability. Consider dead, live, equipment and wind loading. Consider the brick wall loading for 150mm thick and 1.5…

Q1 ) Calculate dead load in design report based on IS code and apply dead load on the model• Finishes of 50mm• Slab thickness as per the design• Brick wall load• Roofing loadANS 1)AIM: To calculate the dead load based on the design and apply it on the structure.TOOLS USED :• MS Excel.• Loads.•…

Q1) Setup model for RC building design and based on following parameters for cover.ANS 1) AIM : To setup model for RC building design and based on following parameters for cover. TOOLS USED :• Tekla software.• File.• Settings.• Structural Defaults. PROCEDURE :1. First open a new tekla file for starting…

Q1 ) Generate seismic loading-based IS codal provisions and zone II. Any other data you can assume and input accordingly.AIM: To generate seismic loading-based IS codal provisions and zone II. Any other data you can assume and input accordingly.TOOLS USED :• Load.• Load cases.• Seismic wizard.• Seismic…

Q1) Based on the analysis design RC column and beam.ANS 1)AIM: To design RC columns and beams based on the analysis.TOOLS USED :• Review.• Check member.• Static.PROCEDURE :1. First we have to open the file in which we have completed the structure. 2. Next we have to validate the model in search on any errors…

Q1 ) Design the slab and foundation of the model. Outline the thought process for designing of the elements (column, beam, slab, and foundations).ANS 1)AIM: To design the slab and roof foundations of the model and to outline the thought process for designing of the elements.TOOLS USED :• Design.• Settings.•…

Q1 ) Generate a report for the steel building design from challenges 1 – 6 along with the loading summary.ANS 1)AIM: To generate a report for the steel building design from challenges 1-6.TOOLS USED :• Report.• Model report.• Show report.PROCEDURE :1. Open the structure and analyze it. 2. Now click…

QUESTION : Develop general arrangement for the RC office building. Analyze and design the building as per IS standard code in TEKLA STRUCTURAL DESIGNER. Refer the attached plan and elevation. The building to be designed for dead, live, wind and seismic loading.Report of each member to be generated and extract drawings…

Aim: To analyse the structure as steel sheeting and Grade A material is used according to IS 2062 . Create a structure as per the given plan in the attachments provided.   TOOLS REQUIRED: • Grids.• Levels.• File.• Model.• Manage property sets.• Column.• Beams.• Frames.•…