II. Answer in detail
Create a G+4 Residential building as per NBC standards and make it a central model file. Your model should contain:
ans)
Aim: To create a G+4 Residential building as per NBC standards and make it a central model file. Your model should contain
Tools Used:
1. collaborate
2. save
Procedure:
1)click collaborate
2) click ok to dialog box opened
3) click save and save the file as central model
The sloped roof at the top level of the building (10 degrees)
Ans)
Aim: To make a sloped roof at the top level of the building (10 degrees)
Tools Used:
3. roof
4. property browser
Procedure:
1)select roof from the architecture toolbar and select the ends
2)select the roof applied and change slope from the property browser
Architectural components including furniture and home appliances
Ans)
Aim: To add architectural components including furniture and home appliances
Tools Used:
5. insert
6. load family
7. component
Procedure:
1)from the load family select the component to be added
2) from the architecture toolbar select component to add the component to plan
Room tags and Annotations
Ans)
Aim: To add room tags and Annotations
Tools Used:
8. room tag
9. annotate
Procedure:
1) select room tag from architecture toolbar
2) select the rooms
3) name them as needed
4) use the annotate tool to measure and mark
Section cut through each room either longitudinally or transversely
Ans)
Aim: To show a section cut through each room either longitudinally or transversely
Tools Used:
10. view
11. section
Procedure:
1)from view select section view
2) draw a line longitudinal or transversely as u need
3) open section view
Create a camera view on each room and add it in a sheet template.
Ans)
Aim: To create a camera view on each room and add it in a sheet template.
Tools Used:
12. sheet
13. view
Procedure:
1)click on sheet and create a new sheet
2) click on view under the sheet and select the views to be added
