Full course · free on YouTube · 49 min

Numerical simulation using MATLAB: free, 49 minutes

One recorded live workshop of about 49 minutes, published in February 2019. It starts with MATLAB basics and matrices, then demonstrates an Otto cycle simulator, an iterative solver for a simple equation, a supersonic nozzle solver and a robotic arm simulator, with audience questions along the way.

24 chapters · published 2 Feb 2019 · 2,873 views as of 21 Nov 2026 · by Skill-Lync

Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗

Who is this course for?

Mechanical, automotive and aerospace undergraduates who have little or no MATLAB experience and want to see how programming is used on engineering problems.

What will you learn?

  • Create arrays and matrices in MATLAB and multiply them element by element or as matrices
  • Recognise the matrix dimensions error and what the dot operator changes
  • Plot data with plot, a line width and axis labels, and see a 3D surface plot
  • See how an Otto cycle script goes from bore, stroke and compression ratio to a P-V diagram
  • Follow how a simple second-derivative equation becomes an update rule and converges by Jacobi iteration
  • See a nozzle flow solver and a robotic arm interface as examples of larger MATLAB projects

What does each part of the course cover?

7 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.

  1. 0:005 min · 1 chapter

    Welcome, agenda and a poll on MATLAB familiarity

    The speaker explains how the live session will use chat answers, then lists the plan: MATLAB basics, math problems solved by programming, an Otto cycle simulator that generates a P-V diagram, and a robotic arm simulator. A chat poll shows most attendees have not used MATLAB.

    Chapters
    • 0:00Welcome, workshop plan and a MATLAB familiarity poll
  2. 4:5413 min · 8 chapters

    MATLAB basics: command window, arrays and matrices

    Uses the command window as a calculator, then builds density and volume arrays and multiplies them element by element with a dot. Shows the matrix dimensions error, rand matrices, A times B, the inverse of a matrix, rescaling rand to 0 to 10, and eigenvalues as one of the built-in functions.

    Chapters
    • 4:54The MATLAB interface and command window
    • 6:29Arrays, element-wise multiplication and rand
    • 8:47Everything is a matrix: dimensions and the matrix multiplication rule
    • 10:07Element-wise operators versus matrix multiplication
    • 10:55Larger matrices: a random 3 by 3 matrix and A times B
    • 12:47Solving A x = b with the matrix inverse, and why to use built-in commands
    • 15:37Changing the range of random numbers, and eigenvalues
    • 16:34Why scripting matters for finite element and robotics coursework
  3. 17:522 min · 1 chapter

    Plotting data in MATLAB

    Plots an array of 10 random numbers against its index, thickens the line with a line width setting and adds axis labels. Notes that 2D and 3D plots follow the same pattern and suggests using MATLAB for any plot you would otherwise draw by hand.

    Chapters
    • 17:52Basic plotting: plot, line width, axis labels
  4. 19:319 min · 4 chapters

    Otto cycle simulator and its P-V diagram

    Runs a finished Otto cycle script that produces a P-V diagram in seconds. The script starts from bore, stroke, connecting rod length and compression ratio, computes swept and clearance volume, then plots the state points. Changing compression ratio or peak temperature shows how the diagram changes.

    Chapters
    • 19:31Running a finished Otto cycle simulator and its P-V diagram
    • 22:20Plotting two arrays: density, mass and volume (audience question)
    • 24:10Variables and engine parameters in the Otto cycle script
    • 26:53Audience questions: linspace versus rand, and a 3D surface plot
  5. 28:259 min · 4 chapters

    Solving a differential equation with an iterative update rule

    Takes a simple second-derivative equation whose analytical solution is a straight line. Discretises it using Taylor series into an update that averages the two neighbouring values, names it as Jacobi iteration, then codes it on a 20-point one-dimensional mesh and watches random values converge.

    Chapters
    • 28:25Setting up a simple differential equation to solve numerically
    • 31:46Discretising with Taylor series to get an update rule
    • 32:44Which iterative method is this? Jacobi iteration
    • 35:07Coding the update rule in MATLAB and watching it converge
  6. 37:168 min · 4 chapters

    Feedback, a supersonic nozzle solver and further questions

    Collects audience reactions, then shows a self-written MATLAB solver for density, temperature and velocity in a supersonic nozzle. Answers questions on choosing C++ or MATLAB and on why eigenvalues matter, linking the equation of motion to a linear system.

    Chapters
    • 37:16Audience feedback, and scripting in thermal and CFD work
    • 39:41A simple supersonic nozzle flow solver in MATLAB
    • 41:27C++ or MATLAB? Learning one language, not just clicking buttons
    • 42:13Why eigenvalues and eigenvectors matter
  7. 45:234 min · 2 chapters

    What else MATLAB can do: robotic arm simulator

    Shows a graphical interface built in MATLAB for a robotic arm. The speaker uses it to explain motion planning, inverse kinematics and elbow up and elbow down configurations, and rates it a more difficult project than the earlier examples before closing the session.

    Chapters
    • 45:23What else MATLAB can do: a robotic arm simulator with a graphical interface
    • 48:29Closing: programming as a project route

Is the Workshop on Numerical Simulation using MATLAB course really free?

Yes. All 49 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 2 Feb 2019 and had 2,873 views as of 21 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.

How long does the Workshop on Numerical Simulation using MATLAB course take to finish?

The video runs 49 min across 24 chapters. That fits in one sitting of under an hour; plan roughly twice that if you practise each exercise as you go. The longest section is "MATLAB basics: command window, arrays and matrices" (13 min), so give it your full attention.

Does the free MATLAB course come with a certificate?

The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.

What should I learn after this course?

The next step is MATLAB Basics (free lessons), then MATLAB for Mechanical Engineers (₹40,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.

Do I need MATLAB experience before watching this workshop?

No. The speaker polls the audience at the start and concludes that most attendees have not used MATLAB, so the session begins with the command window as a calculator, then arrays, matrices and plotting. The speaker compares MATLAB with C and C++ along the way, which helps if you have written C code before. In an audience answer, the speaker also notes that Octave is a free, open-source alternative that runs more slowly.

How does MATLAB solve a simple equation iteratively?

The workshop takes a second derivative of u with respect to x equal to zero, whose solution is a straight line. A Taylor series discretisation gives an update rule that sets each value to the average of its two neighbours. The speaker names this Jacobi iteration, applies it on a 20-point mesh with fixed end values, and shows random starting values converging.

Does the workshop build an Otto cycle simulation?

It demonstrates one rather than building it line by line. The speaker runs a finished script that gives a P-V diagram in seconds, and explains that it starts from bore, stroke, connecting rod length and compression ratio, computes swept and clearance volume, then plots the state points. Lowering the peak temperature narrows the diagram because the work done falls.

Last updated 21 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 21 Nov 2026 · Grow by Skill-Lync: free lessons from every course

Finished the course?

Ask about the certificate or your next course.

Leave your name and phone number. A Skill-Lync counsellor calls you back within one working day about the certificate for Workshop on Numerical Simulation using MATLAB and the course that fits where you want to work.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Free full course · Skill-Lync

Start watching

Free, no payment. Leave your name and phone once and the whole Workshop on Numerical Simulation using MATLAB course plays here, with every free lesson on Grow. A Skill-Lync counsellor may call you about the certificate or your next course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.