Full course · free on YouTube · 1 h 9 min

Aerodynamic simulation of an F1 car: free, 69 minutes

One recorded workshop of about 69 minutes, published in February 2019. The instructor works through the steps of a CFD aerodynamics study as a series of questions to the live audience, then shows a simple wing set-up and its results in ParaView.

25 chapters · published 2 Feb 2019 · 3,227 views as of 20 Nov 2026 · by Skill-Lync

Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗

Who is this course for?

Mechanical and automotive engineering students, including FSAE and Baja team members, who want to know how an external-aerodynamics CFD case is set up and checked.

What will you learn?

  • Describe the steps of an external-aerodynamics CFD study: virtual wind tunnel, boundary conditions, mesh, solve and post-process.
  • Pick the speed to simulate for a high-speed or a low-speed track, and say when wind speed matters.
  • Explain why scaling a car model down does not save computing effort, using Reynolds number.
  • Size the domain, including why the downstream length must clear the wake region.
  • Check y+ against the turbulence model and recognise when a mesh is too coarse or too fine.
  • Plan validation of a CFD setup against published experimental data, such as an airfoil lift curve.

What does each part of the course cover?

6 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.

  1. 0:0013 min · 4 chapters

    Workshop plan, F1 terminology and the virtual wind tunnel

    The instructor outlines the session, then names the F1 parts that shape airflow: front and rear wings, barge boards and end plates, and the engine cooling air. It then defines a virtual wind tunnel as a box around the car with inlet and outlet boundary conditions, a mesh, and forces found by integrating pressure.

    Chapters
    • 0:00Workshop plan and the practical demo
    • 2:06F1 car terminology, the front wing and cooling
    • 8:25Step 1: the virtual wind tunnel
    • 11:06Boundary conditions, mesh and integrating pressure to forces
  2. 13:0318 min · 5 chapters

    Choosing speed, model size and wind tunnel size

    Which speed to simulate depends on the track, with low drag for straights and high downforce for corners. Scaling the car down does not help because Reynolds number must be kept, so the instructor suggests a 1:1 model. The domain should extend well downstream so the wake does not touch the outlet boundary.

    Chapters
    • 13:03Which speed to simulate: high-speed and low-speed tracks
    • 17:37When wind speed matters in the set-up
    • 19:15How big should the car model be? Scaling and Reynolds number
    • 24:04How big should the wind tunnel be?
    • 27:23The wake region and the downstream length
  3. 30:4710 min · 4 chapters

    Results you need and how to validate them

    Downforce, drag and lift all come from pressure and shear stress. The instructor stresses that convergence does not mean correctness, and that validation against experimental data is needed. For students the suggestion is to find a published case with matching Reynolds number, tune mesh and turbulence settings on it, then reuse them on the car.

    Chapters
    • 30:47Which results you need: downforce, drag, lift
    • 33:05How do you know the results are correct? Validation
    • 36:25Validating without a wind tunnel: public experimental data
    • 38:44Airfoil lift curve and the allowed error
  4. 40:206 min · 3 chapters

    What CFD outputs and the computing power it takes

    A slide of an older F1 car model shows downforce and drag split by component, such as front wing, wheels, floor and diffuser, and the idea of aerodynamic efficiency. Post-processing is how you query forces on a single part. The instructor then gives a minimum workstation of 6 to 12 cores and 64 GB of RAM.

    Chapters
    • 40:20What data CFD gives: forces per component
    • 43:12Post-processing and aerodynamic efficiency
    • 44:05How much computing power you need
  5. 46:1812 min · 5 chapters

    Boundary layer, mesh refinement, y+ and turbulence models

    Near-wall flow is split into a viscous sublayer and an outer layer. The mesh is judged by y+, not by cell count, and y+ must suit the turbulence model: k-epsilon is a high-Reynolds-number model, while k-omega SST and Spalart-Allmaras are suggested for external aerodynamics. Over-refining with k-epsilon gives wrong shear stress and drag.

    Chapters
    • 46:18Boundary layer, viscous sublayer and the mesh it needs
    • 48:16How fine should the mesh be? Introducing y+
    • 51:23y+ and the k-epsilon turbulence model
    • 54:42When to stop mesh refinement and which turbulence model to use
    • 56:39Why excessive refinement gives wrong results
  6. 58:3411 min · 4 chapters

    Demo: a simple F1 wing case and its results

    On a front-wing geometry taken from GrabCAD, the instructor shows a steady-state set-up with a velocity inlet, an outlet and slip walls, a turbulence model, and a Cartesian base grid. Results are opened in ParaView with tracers, vorticity near the end plate and a pressure plot. The mesh is coarse, so only the qualitative downforce trend is trusted.

    Chapters
    • 58:34Demo: F1 wing geometry in a virtual wind tunnel
    • 1:00:14Demo: solver, convergence and boundary conditions
    • 1:03:01Demo: turbulence model, wall functions and mesh type
    • 1:06:31Demo results in ParaView and closing

Is the Aerodynamic Simulation of an F1 Car course really free?

Yes. All 1 h 9 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 2 Feb 2019 and had 3,227 views as of 20 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.

How long does the Aerodynamic Simulation of an F1 Car course take to finish?

The video runs 1 h 9 min across 25 chapters. At one hour a day that is about 2 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Choosing speed, model size and wind tunnel size" (18 min), so give it its own days.

Does the free CFD course come with a certificate?

The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.

What should I learn after this course?

The next step is Advanced Aerodynamic Simulations using CONVERGE (free lessons), then Advanced Aerodynamic Simulations using CONVERGE (₹40,000), then Post Graduate Program in External Aerodynamic Simulations (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.

What minimum computer is needed to run F1 aerodynamic CFD?

The instructor says that in this 2019 workshop, at least 6 to 12 cores and 64 GB of RAM are the minimum to do justice to such simulations, and that a good graphics card can be skipped. The reasoning is that a fine enough mesh near the walls takes very large cell counts, so a laptop is not enough.

Can I scale down my car model to run CFD on a small computer?

The video says no. If you shrink the car by a factor of 10, the speed must rise by the same factor to keep Reynolds number, so the near-wall mesh still has to be fine to resolve turbulence. The instructor recommends simply modelling the car 1:1 and keeping it as realistic as possible.

Which CFD software does this F1 workshop use?

The speaker does not name the solver in the recording. It is described as a tool the instructor is familiar with, and the same steps are said to apply to other tools such as STAR-CCM+ or Ansys Fluent. The demo results are viewed in ParaView, and the geometry is a wing model taken from GrabCAD.

Last updated 20 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 20 Nov 2026 · Grow by Skill-Lync: free lessons from every course

Finished the course?

Ask about the certificate or your next course.

Leave your name and phone number. A Skill-Lync counsellor calls you back within one working day about the certificate for Aerodynamic Simulation of an F1 Car and the course that fits where you want to work.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Free full course · Skill-Lync

Start watching

Free, no payment. Leave your name and phone once and the whole Aerodynamic Simulation of an F1 Car course plays here, with every free lesson on Grow. A Skill-Lync counsellor may call you about the certificate or your next course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.