Fundamentals of electric vehicles bootcamp: free, 2.4 hours
This is a 2021 recording of day one of a two-day Skill-Lync bootcamp, 2 hours 25 minutes long. The first 1 hour 43 minutes is a slide presentation on why EVs are rare, cost, components, energy flow and learning paths, followed by about 40 minutes of live audience questions. Day two (batteries and a MATLAB demo) is not in this video.
25 chapters · published 8 Jul 2021 · 6,247 views as of 19 Nov 2026 · by Skill-Lync
Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗
Who is this course for?
Electrical, electronics and mechanical students or early-career engineers who want to understand how an EV is put together, where its energy is lost, and how to start learning the field.
What will you learn?
- Explain energy density in watt-hours per litre and why it limits EV range compared with petrol
- Say why every engine vehicle already has a battery and starter-generator, and how that separates hybrid from pure electric
- Set up a total cost of ownership comparison from on-road price, running cost, maintenance and battery replacement
- Name the main EV components (traction motor, power electronic controller, battery pack, DC-DC converter, onboard charger, cooling) and what each does
- Multiply cascaded stage efficiencies from battery to wheels and see why the result is below the lowest stage
- List the four fundamental subjects and the simulation habit the speaker recommends for starting EV work
What does each part of the course cover?
8 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.
- 0:1417 min · 3 chapters
Why electric vehicles are still rare
Opens with the agenda for the two days, then asks the chat why EVs are not everywhere. The speaker explains energy density in watt-hours per litre, the resulting range gap with petrol, battery cost, charging infrastructure and service support, and answers questions on lead-acid versus lithium-ion.
- 17:1319 min · 3 chapters
Hybrid and pure EV, conversion stages and the market forecast
Shows that engine vehicles already use a battery and a starter-generator, so the line between hybrid and pure EV is whether the motor can replace the engine. Compares three conversion stages in a petrol vehicle with two in an EV, then reads a consultancy forecast driven first by regulation and subsidy, later by cost.
- 35:4713 min · 1 chapter
Total cost of ownership
Defines total cost of ownership as on-road price plus running cost, maintenance, battery replacement and end-of-life value. Compares a 2019 Honda Civic (about 23,000 US dollars) with a Nissan Leaf (about 36,000), whose five-year totals come out near 66,000 and 63,000, and polls the chat on whether EVs are affordable.
Chapters
- 35:47Total cost of ownership: petrol car versus electric car
- 48:3317 min · 5 chapters
EV architecture and the main components
Draws a front-wheel-drive EV with battery, motor controller, motor and fixed-ratio gearbox, and asks how many parts rotate in an engine powertrain compared with an EV. Then walks through the traction motor, power electronic controller, pack placement, the DC-DC converter for 12 V loads, the onboard AC-DC charger and two cooling circuits.
Chapters
- 48:33EV architecture: battery, controller, motor, gearbox and the few moving parts
- 53:26Inside the vehicle: traction motor, power electronics, battery pack placement
- 58:48Why a DC-DC converter is needed for the 12 V auxiliary loads
- 1:01:03Onboard charger: AC to DC and why the car carries one
- 1:03:14Cooling the battery, motor and converter, and the cabin air conditioning
- 1:05:4823 min · 4 chapters
Energy flow and cascaded efficiency
Follows energy from battery to wheels, notes that power plant efficiency makes well-to-wheel efficiency much lower, and lists the loss points: self-discharge, converter heat, motor and gearbox. A calculation multiplies stage efficiencies of 95, 85, 85 and 80 percent to about 55 percent, then explains why driving cycles change these values.
- 1:28:5315 min · 3 chapters
Learning path and why simulation matters
Names four subjects to combine for EVs: vehicle dynamics, motor speed and torque, power converters, and microcontroller control, plus software tools used iteratively. Then discusses why to simulate, using a resistor example where a model reaches power levels a lab cannot, and previews the MATLAB and Simulink battery pack session for day 2.
- 1:43:4922 min · 3 chapters
Q&A: chargers, software, hybrids, motors and careers
Answers chat questions on onboard versus off-board chargers, electric power steering and autonomy, which simulation tools suit which task, cyber security, hydrogen vehicles, why battery EVs may outgrow hybrids, AC versus DC traction motors, reliability, liquid cooling, and what the battery management system actually is.
- 2:06:1019 min · 3 chapters
Q&A: protocols, motors, swapping and the generator loop
Continues the questions with Tesla's use of induction and permanent-magnet motors, CAN and other in-vehicle communication, PMSM versus BLDC, fixed versus swappable batteries, charging-station rollout, three-wheeler variants and fast charging. Ends by explaining why a generator on the motor shaft cannot refill the battery.
Is the Fundamentals of Electric Vehicle (Part 1) course really free?
Yes. All 2 h 25 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 8 Jul 2021 and had 6,247 views as of 19 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.
How long does the Fundamentals of Electric Vehicle (Part 1) course take to finish?
The video runs 2 h 25 min across 25 chapters. At one hour a day that is about 3 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Energy flow and cascaded efficiency" (23 min), so give it its own days.
Does the free electric vehicles course come with a certificate?
The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.
What should I learn after this course?
The next step is EV Fundamentals (free lessons), then EV Fundamentals (₹40,000), then Post Graduate Program in Electric Vehicle Design & Development (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.
Why is the overall EV efficiency lower than the efficiency of each part?
The session treats battery, power converter, motor and gearbox as stages in series, so their efficiencies multiply. With example values of 95, 85, 85 and 80 percent the product is about 55 percent, which is below the lowest stage. The speaker adds that real values change with speed, torque and the driving cycle.
Which software is used to simulate an electric vehicle?
The speaker says it depends on what is being simulated. Battery cooling uses computational fluid dynamics, motor design uses an electromagnetic solver such as Ansys Maxwell, system-level studies use MATLAB and Simulink, and PCB design uses another tool. The battery pack demo planned for day two is not in this video.
What background do I need before this EV session?
No prerequisite is stated. The speaker recommends building knowledge of vehicle mechanics and dynamics, motor speed-torque behaviour, power converters, and microcontroller-based control, then applying software tools, and notes electrical and electronics graduates will have met these subjects separately.
Last updated 19 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 19 Nov 2026 · Grow by Skill-Lync: free lessons from every course