Automotive electronics basics: free, 45 minutes
One recording of about 45 minutes, narrated over slides, from January 2025. It starts with how electronics entered the car, then covers ECU messages and sensors, passive and active safety systems, the infotainment, instrument cluster and body control module, in-vehicle communication, and ends with skills and employers.
9 chapters · published 31 Jan 2025 · 5,093 views as of 19 Nov 2026 · by Skill-Lync
Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗
Who is this course for?
Engineering students and beginners who want a first overview of the electronics inside a modern car, from ECUs and sensors to safety systems and career paths.
What will you learn?
- Explain why electronics grew as a share of car cost and list the main application areas of automotive electronics
- Name the typical messages an ECU processes and what the mass air flow, spark knock and manifold absolute pressure sensors measure
- Tell analog, digital and PWM sensor outputs apart
- Distinguish passive safety (seat belts, airbags) from active safety (ABS, traction control, ESP) and describe how ABS uses cadence braking
- Describe what the instrument cluster, body control module and infotainment system each contain
- List the embedded-systems skills the speaker recommends for an automotive electronics career
What does each part of the course cover?
6 sections, in watching order. Click a timestamp to jump the player there. Chapter titles are from the video description, lightly edited for spelling.
- 3:415 min · 2 chapters
How electronics entered the car, and where it is used
Why cars moved from mechanical to electronic systems, read from a graph of electronics as a share of total car cost from 1976 with a projection to 2030. Then the application areas (body electronics, driver information, powertrain, vehicle network, infotainment) and a few dated firsts from Volkswagen and General Motors.
- 9:083 min · 1 chapter
ECU messages, sensors and sensor output types
What an ECU is and the typical messages it processes, such as engine torque, throttle position, vehicle speed and OBD data. A list of common car sensors follows, with the mass air flow, spark knock and manifold absolute pressure sensors explained, then analog, digital and PWM sensor outputs.
Chapters
- 9:08ECU (electronic control unit): messages and sensors
- 11:3820 min · 1 chapter
Passive and active safety: airbags, ABS, traction control and ESP
Passive safety acts after impact: seat belts and airbags, their prerequisites, their parts and how the inflator works. Active safety acts before impact: ABS with cadence braking, its speed sensors, valves, pump and controller, then traction control and the electronic stability program, and how the three work together.
Chapters
- 11:38Safety systems: airbags, ABS, traction control and ESP
- 31:162 min · 1 chapter
Infotainment and navigation systems
The infotainment system grouped into multimedia, navigation, connectivity, car control and information. Multimedia features, navigation features such as onboard navigation, GPS and map matching, and connectivity features such as call control, Bluetooth and USB are listed from the slides.
Chapters
- 31:16Infotainment and navigation systems
- 33:016 min · 3 chapters
Instrument cluster, body control module and in-vehicle communication
The instrument cluster: speedometer, tachometer, odometer and trip meter, and how the odometer differs from the trip meter. Then the body control module (HVAC, power windows, central locking, immobilizer, wipers, sunroof motors), and the subsystems that talk over in-vehicle communication.
- 38:537 min · 1 chapter
Career paths and skills in automotive electronics
In this recording the speaker cites industry reports on electric and autonomous vehicles as the case for jobs in the field. The skills listed are embedded systems, C programming, sensors, IoT, communication protocols and signal conditioning, followed by entry roles and target employers.
Chapters
- 38:53Career paths, skills and employers in automotive electronics
Is the Introduction to Electronics in Automotive Systems course really free?
Yes. All 46 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 31 Jan 2025 and had 5,093 views as of 19 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.
How long does the Introduction to Electronics in Automotive Systems course take to finish?
The video runs 46 min across 9 chapters. At one hour a day that is about 1 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Passive and active safety: airbags, ABS, traction control and ESP" (20 min), so give it its own days.
Does the free automotive electronics course come with a certificate?
The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.
What should I learn after this course?
The next step is Fundamentals of Embedded Systems (free lessons), then Introduction to Automotive Embedded Systems and AUTOSAR (₹40,000), then PG Program in Embedded Systems for EV Applications (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.
Do I need any background to follow this automotive electronics course?
The video does not state formal prerequisites. The description says it is designed for beginners and engineering students. The narration explains terms such as ECU, PWM and cadence braking as they come up, and no software or licence is used because it is a slide-based talk.
What is the difference between active and passive safety systems in a car?
The video says passive safety systems act after impact, for example seat belts and airbags, and their purpose is to save lives in an accident. Active systems such as ABS, electronic stability control and lane departure warning act before an accident to help prevent it.
How does ABS stop the wheels from locking?
The video explains that the ABS controller watches the wheel speed sensors for a sudden deceleration. It then reduces brake pressure at that wheel through the valve and raises it again, repeating this very quickly. This copies cadence braking, where the driver pumps the brake while steering.
Last updated 19 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 19 Nov 2026 · Grow by Skill-Lync: free lessons from every course