Full course · free on YouTube · 20 h 38 min

AutoCAD for mechanical engineers: free 20-hour course

A two-video AutoCAD course of about 20.6 hours, taught as 12 weekly chapters that move from line and circle through editing, hatching, dimensioning and GD&T to blocks, plotting and AutoLISP. Chapter 6 runs across both videos, and the last chapter covers project management.

44 chapters · 2 parts · published 13 Sept 2024 · 4,02,873 views as of 18 Nov 2026 · by Skill-Lync

Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗

Who is this course for?

Mechanical and automotive engineering students and working engineers who want to learn 2D drafting in AutoCAD from the first command onwards.

What will you learn?

  • Draw 2D geometry with line, circle, arc, ellipse, rectangle, polygon and polyline, using absolute, relative and polar coordinates
  • Draw to size using object snap, polar tracking, dynamic input, drawing limits and units
  • Edit drawings with move, copy, array, mirror, offset, trim, extend, fillet and chamfer, and fill sections with hatches
  • Annotate drawings with text, linear, radial and angular dimensions, leaders and tolerance feature control frames
  • Read limits, fits, IT grades and common GD&T symbols such as flatness, position and runout
  • Build reusable blocks with attributes and constraints, use external references and layers, set up layouts and plot to PDF

What does each part of the course cover?

13 sections, in watching order. Click a timestamp to jump the player there. The video description only numbers its chapters, so the chapter titles here say what each one teaches, written from the video.

Part 1 · 9 h 44 min

  1. 3:031 h 49 min · 4 chapters

    Chapter 1: Drafting basics, the interface and first commands

    Why technical drawings matter, orthographic projection and first-angle versus third-angle views, a short history of CAD, workspaces and ribbon, then erase and oops, the line command with absolute, relative and polar coordinates, and circle, arc and ellipse methods.

    Chapters
    • 3:03Course overview and technical drawing basics (chapter 1, part 1)
    • 31:19History of CAD and the AutoCAD interface (chapter 1, part 2)
    • 57:39Erase, oops, line and coordinate entry (chapter 1, part 3)
    • 1:24:33Tangent circles, arcs and ellipses (chapter 1, part 4)
  2. 1:52:141 h 48 min · 4 chapters

    Chapter 2: Drafting settings and basic editing

    Object snap, snap and grid, polar tracking, quick properties and dynamic input, then limits, units, undo, and the move, copy, array (rectangular, polar, path), break, mirror and offset commands. Ends with a spacer plate drawn with hexagonal nuts.

    Chapters
    • 1:52:14Drafting settings: object snap, grid and polar tracking (chapter 2, part 1)
    • 2:28:18Dynamic input, limits, units, move, copy and arrays (chapter 2, part 2)
    • 3:00:53Path array, break, mirror and offset (chapter 2, part 3)
    • 3:20:35Rectangle, polygon and polyline, with a spacer plate exercise (chapter 2, part 4)
  3. 3:40:371 h 38 min · 3 chapters

    Chapter 3: Zoom, steering wheels and selection methods

    Setting limits for A4 and A2 sheets, the zoom options (all, window, extents, scale, object), the steering wheel, solid and donut, and window, fence and polygon selection. A 400 by 200 mm plate with M8 holes and a friction plate are drawn.

    Chapters
    • 3:40:37Zoom options and setting sheet limits (chapter 3, part 1)
    • 4:12:38Steering wheels, solid, donut and window selection (chapter 3, part 2)
    • 4:47:21Fence and polygon selection, with a friction plate exercise (chapter 3, part 3)
  4. 5:18:471 h 58 min · 4 chapters

    Chapter 4: Text, properties and editing commands

    Single-line text and multiline text with justification options, text styles, special characters, mtext columns, colour and linetype, then stretch, trim, extend, join, scale and rotate. A latch plate drawing at the end applies these commands.

    Chapters
    • 5:18:47Single-line text and justification (chapter 4, part 1)
    • 5:49:27Text styles, special characters and multiline text (chapter 4, part 2)
    • 6:22:23Colour, linetype, trim, extend, join, scale and rotate (chapter 4, part 3)
    • 6:55:29Latch plate drawing exercise (chapter 4, part 4)
  5. 7:16:571 h 58 min · 4 chapters

    Chapter 5: Hatching, polylines, fillet and inquiry tools

    Hatch and gradient settings, editing hatches and island detection, polyline options and PEDIT, fillet and chamfer with a safety and fit rationale, grip editing, and the inquiry commands: ID, list, distance and area, including adding and subtracting areas.

    Chapters
    • 7:16:57Hatch and gradient settings (chapter 5, part 1)
    • 7:45:03Hatch editing, island detection and polyline options (chapter 5, part 2)
    • 8:16:06Editing polylines with PEDIT, and an introduction to fillet (chapter 5, part 3)
    • 8:42:17Fillet, chamfer, grips and the inquiry tools (chapter 5, part 4)
  6. 9:15:1129 min · 1 chapter

    Chapter 6, part 1: GD&T and dimensioning principles

    What GD&T is and why drawings need shape, form, fit and function stated without ambiguity. Covers dimension line, extension line, leader, diameter and radius notation, reference dimensions, and the rules that stop a dimension being duplicated or contradicted.

    Chapters
    • 9:15:11GD&T introduction and dimensioning rules (chapter 6, part 1)

Part 2 · 10 h 54 min

  1. 0:041 h 26 min · 3 chapters

    Chapter 6, part 2: Dimension commands, leaders and dimension styles

    The AutoCAD dimension commands: linear, radius, diameter, centre mark, angular, baseline, continue, ordinate, jogged, dimension space, break and inspection dimensions. Then leader, QLEADER and multileader, associative dimensions, dimension edit and the dimension style settings.

    Chapters
    • 0:04Linear, radius, diameter and angular dimensions (chapter 6, part 2)
    • 28:31Continue, ordinate, jogged, space, break and inspection dimensions (chapter 6, part 3)
    • 53:28Leaders, associative dimensions and dimension styles (chapter 6, part 4)
  2. 1:26:191 h 33 min · 3 chapters

    Chapter 7: Tolerances, fits and geometric tolerances

    Why parts need tolerances and interchangeability, bilateral limits, size, deviation, datums, allowances and hole-basis fits, ISO 286 grades, then form, orientation, position and runout tolerances, material condition modifiers, and a feature control frame placed in AutoCAD.

    Chapters
    • 1:26:19Tolerancing, limits, datums and hole-basis fits (chapter 7, part 1)
    • 2:01:47Types of fit, IT grades and form tolerances (chapter 7, part 2)
    • 2:32:17Orientation and runout tolerances, modifiers and feature control frames (chapter 7, part 3)
  3. 2:59:231 h 55 min · 4 chapters

    Chapter 8: Filters, blocks, constraints, layers and shortcuts

    QSELECT and the FILTER command with logical operators, then blocks: create, insert, WBLOCK, attributes and the block editor. A hexagonal nut gets geometric and dimensional constraints, a visibility-state block, layers and the keyboard shortcut reference.

    Chapters
    • 2:59:23QSELECT and the FILTER command (chapter 8, part 1)
    • 3:21:34Creating and inserting blocks, and geometric constraints (chapter 8, part 2)
    • 3:51:04Dimensional constraints and the block editor (chapter 8, part 3)
    • 4:18:25Attributes, visibility states, layers and shortcuts (chapter 8, part 4)
  4. 4:54:241 h 42 min · 4 chapters

    Chapter 9: File management, external references and Design Center

    File hierarchy and naming conventions (a BS 1192 style example), metadata, version control, then external references: attach versus overlay, binding, nested references, explode and purge, followed by Design Center and tool palettes on a pump sub-assembly.

    Chapters
    • 4:54:24File management and folder hierarchy (chapter 9, part 1)
    • 5:12:24File naming conventions (chapter 9, part 2)
    • 5:31:02Metadata, version control and external references (chapter 9, part 3)
    • 6:03:53Binding xrefs, purge, Design Center and tool palettes (chapter 9, part 4)
  5. 6:36:121 h 11 min · 3 chapters

    Chapter 10: Plotting, macros and layouts

    Plotting a drawing to PDF with plot area, orientation and plot style options, recording and editing action macros, writing a custom circle command and adding it to a toolbar, a short VBA example, and model space, paper space and viewports in layouts.

    Chapters
    • 6:36:12Plotting to PDF and recording action macros (chapter 10, part 1)
    • 7:03:53Action macro manager, custom commands and VBA (chapter 10, part 2)
    • 7:32:52Layouts, paper space and viewports (chapter 10, part 3)
  6. 7:46:521 h 26 min · 3 chapters

    Chapter 11: AutoLISP programming basics

    What programming and algorithms mean, then AutoLISP: lists, data types, arithmetic, variables, the command and pause functions and defun. A zoom-and-circle routine is saved as a .lsp file, loaded with load and APPLOAD, and debugged with the Visual LISP editor.

    Chapters
    • 7:46:52AutoLISP basics: programming, lists and data types (chapter 11, part 1)
    • 8:17:02AutoLISP variables, command, pause and defun (chapter 11, part 2)
    • 8:47:15Saving, loading and debugging AutoLISP (chapter 11, part 3)
  7. 9:12:441 h 41 min · 4 chapters

    Chapter 12: Project management for engineers

    A project versus an operation, programs and portfolios, constraints, the PMI and its guide, process groups and knowledge areas, project charter and stakeholders, planning baselines and risk, team development stages, leadership styles, monitoring and closing.

    Chapters
    • 9:12:44Project management: projects, programs and portfolios (chapter 12, part 1)
    • 9:34:25PMI, process groups and knowledge areas (chapter 12, part 2)
    • 9:54:47Initiating and planning: charter, stakeholders, baselines, risk (chapter 12, part 3)
    • 10:15:25Team development, leadership, monitoring and closing (chapter 12, part 4)

Is the AutoCAD Essentials for Mechanical Engineers course really free?

Yes. All 20 h 38 min of it is free on Skill-Lync's YouTube channel, with no payment, in 2 parts. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 13 Sept 2024 and had 4,02,873 views as of 18 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.

How long does the AutoCAD Essentials for Mechanical Engineers course take to finish?

The video runs 20 h 38 min across 44 chapters. At one hour a day that is about 21 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Chapter 5: Hatching, polylines, fillet and inquiry tools" (1 h 58 min), so give it its own days.

Does the free AutoCAD course come with a certificate?

The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.

What should I learn after this course?

The next step is AutoCAD Essentials for Mechanical Engineers (free lessons), then AutoCAD Essentials for Mechanical Engineers (₹40,000), then Post Graduate Program in CAD (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.

Is this AutoCAD course 2D or 3D?

It is a 2D drafting course. The instructor says the main skill is two-dimensional drafting and explains that most design work now starts from 3D models, with 2D drawings taken from them. 3D appears only briefly, for example in the workspace and ViewCube overview. The final chapters add AutoLISP and project management.

Do I need AutoCAD installed to follow the course?

The instructor works live inside AutoCAD in every drafting chapter, so you need access to the software to practise the commands. The video does not discuss licences, student versions or installation, so check Autodesk's current offer separately. The course starts from the basics, beginning with drawing fundamentals and the interface.

Does the course cover GD&T and dimensioning?

Yes. Chapter 6 covers dimensioning rules and every dimension command, plus leaders and dimension styles. Chapter 7 covers tolerances, limits, datums, fits, ISO 286 IT grades and geometric tolerances such as straightness, flatness, position and runout, ending with a feature control frame placed in AutoCAD.

Last updated 18 Nov 2026 · Course length, chapters, views and dates from the YouTube videos on 18 Nov 2026 · Grow by Skill-Lync: free lessons from every course

Finished the course?

Ask about the certificate or your next course.

Leave your name and phone number. A Skill-Lync counsellor calls you back within one working day about the certificate for AutoCAD Essentials for Mechanical Engineers and the course that fits where you want to work.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Free full course · Skill-Lync

Start watching

Free, no payment. Leave your name and phone once and the whole AutoCAD Essentials for Mechanical Engineers course plays here, with every free lesson on Grow. A Skill-Lync counsellor may call you about the certificate or your next course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.