← Previous lessonFree lesson 3 of 3 · lesson 3 of 49

Unlock all 49 lessons of Turbulence and RANS ModellingFull course ₹40,000 · paid

Price & syllabus
Free lesson · 27 min · no payment

Momentum Conservation and Deriving the Navier-Stokes Equations

A free lesson from Skill-Lync's Turbulence and RANS Modelling course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 3”

What will you learn in this free Turbulence and RANS Modelling lesson?

The instructor applies momentum conservation to a cubic fluid element, covering pressure, viscous and body forces. The lesson introduces the convective derivative and Einstein notation, relates shear stress to the strain rate tensor, and combines these steps into the Navier-Stokes momentum equation.

  • Rate of change of momentum for a fluid element
  • Pressure, shear and body forces on an element
  • Einstein summation notation for compact equations
  • Linking shear stress to strain rate tensor

What comes after lesson 3?

Later in Skill-Lync's Turbulence and RANS Modelling course (paid): lesson 4, Week 1 Session 4; lesson 5, Week 2 Session 1; lesson 6, Week 2 Session 2. The full course has 49 lessons (19 h 41 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Hello, everyone. Welcome back to the session three of the first week. In the last session, we looked at how to start applying conservation laws. In this session, we will continue that. So a bit of recap. So we applied the conservation of mass, assuming the incompressible flow, and we obtained the shown expression, which is the divergence of velocity is 0. So keep in mind that I will show the vectors with a bold sign. So here, bold V is the vector V for velocity. So divergence of velocity is equal to 0 basically means that for incompressible flow in arbitrary shape element, that is dS.

So the rate of the entering of mass has to be equal to the rate of exiting of mass. So in a given arbitrary surface or volume, the mass has to be the same. Right. In this talk, we will focus on the conservation of momentum. There are limitations to these expressions of the momentum conservation because they will not take us to the final form of the Navier-Stokes. We will be using the constitutive relations. So we will understand about the viscous stresses and how these stresses are related to the fluid element deformation rate.

OK, so by the end of this video, you would have a good understanding of how to apply momentum conservation to a fluid element and what are the different stresses, the normal and the shear stress is doing in the fluid flow and how they affect the final form of the Navier-Stokes equation. OK, so let's jump in. I am showing you three equations. So the first one is the direct application of conservation of momentum to a fluid element. The second one is the relation between the shear stresses and the deformation.

So tau ij are the shear stresses. And Sij is the deformation rate of a fluid element. Then the third equation is the closest form of the momentum equation in Navier-Stokes equations. So we will go step by step from the fundamentals to these equations. So here is the basic statement that the rate of change of momentum in a fluid element must be equal to the force applied or the forces applied. So when we want to write this expression for a small fluid element, which could be, for example, because we are working in Cartesian coordinates, let's consider a cube.

And in this cube, my drawing skills are a bit limited here. So let's say this cube has a volume delta v. So how can you write rate of change of momentum in this shape? So I would say how I would write a momentum expression is something like the small amount of mass that this element has, multiplied by the velocity. And it's the vector velocity. Now, changing it into the volume, we get this. Now, if you want to write the rate change of momentum, then for a finite rate, let's put a delta.

Then you can start writing something like that. And because we are not changing the volume of elements. So this part is constant. So what we can write now in the limit of. OK, so the small volume is constant. So we can treat it as a constant. And the rate of change of momentum can then be simply written as. OK, so this is the expression for the left-hand side of the equation on the top. And that is the rate of change in momentum. Here, because through each small volume, our fluid is moving, say, like that.

So it is, therefore, we have to use convective derivative. So the convective derivative, it shows the change of time when the medium is moving. So we denote convective derivative as d or dt. And I will talk more about it after this derivation. So finally, the expression for the rate of change of momentum for a fluid flow can be written as. So it is the same as the expression that we wrote before. But now we are using a convective derivative. And I will give you more concrete reasons why we use this type of derivative later.

I have to correct myself. It is a multiplication here. OK, so on the top, we have our fundamental equation. And we have now an expression for the left-hand side. Now, I would like to put it down here once more for our reference. OK, so now we are concerned about the nature of the forces applied. So on the left, I am showing you the fluid element we are considering. So again, in the x-direction, the dimension of the element is delta x, delta y, delta z, respectively. So on this element, as you can probably imagine in two dimensions, one could have normal forces.

I can draw a two-dimensional case for you. So one can have normal forces and shear forces. So the normal forces are trying to compress this 2D plate, let's say, or they could be in the other direction and they might be trying to expand this 2D plate. On the other hand, the shear forces are trying to deform it, for example, into a shape like that. So there are two types of forces here, and then there could be a force that is acting on the volume of this plate.

So this type of force is, for example, gravity. It's acting on each and every molecule, if you would, and the whole plate is subject to a uniform gravitational force. So similarly, here in three-dimensional, you have normal forces. So I have not shown them here, but they would be something like that. And there are shear forces again. So those shear forces I am denoting by tau. So I will make a note here. So these shear forces are trying to deform this element. And, well, if you remember your Mechanics 101, these shear forces can be written as shown.

And we will understand how these shear forces then we can write into the deformation rate. Okay, so we understood that there are three forces that are active, pressure force, the shear force, and the... Body force. So the example of body forces can be gravitation or magnetic forces. If you remember the case where I was showing you the vertical structure, so the turbulent structures on the surface of the sun, and I ask you what are the different forces that are working there. And this is how you can relate those forces to the equations. So here those body forces would be non-negligible and play a part. But for now, we are going to neglect the body forces because they can be easily incorporated later.

So let's start by understanding how to write the expression for the pressure force. It is quite easy, in fact. You can just write it as an integral over the surface. So the surface, all the surface of this cube. And we write it as pressure acting over elemental area. So that would be delta x multiplied by delta z, or delta x multiplied by delta y, and so on. Now, from the divergence theorem, you can write this surface integral into a volume integral. And that would become something like that. So this is the divergence theorem.

So one might be wondering why the sign of pressure, there is a negative sign in front of pressure. This is because the direction of pressure and the direction of normal opposite to each other. In fact, how I am showing you the normal force is in the opposite direction of pressure. So the pressure is acting inwards, but the normal of the surface is outwards. So this is why you have a negative sign here. Anyway, let's go to the shear forces. So the shear forces are coming from, so let's first understand the origin of shear forces.

So again, I would go to a two-dimensional element. And let's consider there is neighboring element here. So what is happening is, now I would like to talk in terms of microscopic level, so the molecular level. So what is happening is, if this element is moving towards the left, these molecules, say these molecules are on the lower side of this element, and these molecules are on the upper side of the lower element. And when this fluid element starts to move to the left, there are forces, there are cohesion forces between these molecules.

And when these molecules starts to move, they will start pulling with them the lower, say, layer of molecules. So that generates the shear stress, okay? Now we know the origins of the shear force. So I will then just write it as a viscous force, because this force is because of viscosity. And let's see how the expression of this force turns out to be. Let's start writing its expression in the x direction, for example. Now, what you can write is, so I would just write that the definition of stress would be force upon area.

So we will use this definition to write the force in the x direction, say. So here, the force can be written as, so all the components in the x direction we have to consider, and this whole thing multiplied by the area. So now what we have is all the contribution from all the forces in the x direction. And so we can also write it as, if we are talking in terms of the volume, we can write it as this over delta y, and this over delta c.

So I have rewritten the expression here, and what you can observe here is, that you have some repeated indices. For example, so because of this, you can write this expression in a more compact form, which can be written as tau, so we will use indices. So for example, you can write it as an index j, which changes, and similarly, you can say that you will write the space as an index as well. So now, something important to notice here is that, whenever you have repeating indices, you sum over this expression.

So what I mean is that, so because you have j and j in this expression, and j goes from x, y, to z, z, this basically means that, whenever you have j occurring twice in an expression, you have to sum over it. And this is known as Einstein notation. I will give you more examples of it, this is a very first, let's say, hello of Einstein's notation to you. We will do some more exercises later, but for now, just remember that you can contract the expressions like this.

So similarly, you can write the expressions of f, y, and f, z, and now, again, if we consider the y and z another index, say, i. So let's say, f, x, f, y, f, z, z, then use an index i. So what we can do is that, we can say the force in the ith direction, which varies from x, y, to z, can then be written by replacing this x here by i, which is the index denoting this direction here. So the final expression we have for the ith direction is this.

So now, we have expressions for the pressure force and the viscous force. Let's now plug them into the main equation. Okay, so now I have on the left-hand side the rate of change of momentum, the pressure force, and the viscous force effect. So now, we can simply write it as this, and some of you might be recognizing that this is the first expression in our slide that we were after. So here is the 2D elemental example that I was using before to describe the viscous stresses.

So here we understood that if an element, that is, let's say, the lower element, is in effect of an immediate... It might undergo deformation and this is shown in the cartoon on the right. So what we are saying here is that say this is the shape of the element initially then under the effect of shear stress it undergoes deformation. So initially the time is T0. Finally the time is T plus delta T. So after a short time delta T there has been a T formation in the element and this deformation for simple reasons I have just taken in one direction.

So the deformation has only happened in the X direction and not in the Y direction. Okay. Now we have to focus on what happens to this corner point. So this corner point, first of all, it moves from its original location to this point and the rate of that distance can be written with this expression. So the X velocity multiplied by the time spent plus there has been a little bit more movement due to the deformation and this movement due to the deformation can be given by this expression here.

So this expression is basically coming from the fact that we can write the angles as a ratio between the arc and the radii. So what we have from here is that we can write the deformation, the total deformation of this corner point as this expression. So I have just rewritten the expression from the expression from the top to here. Now we can write this change in angle as the derivative of the velocity with respect to the Y direction. So, well, this multiplied by this. So this then gives us something to work with, because we have now what we have done is we have written the deformation rate in terms of the velocity and the space coordinate, which is Y here.

So the next step is to write the definition of the shear stress, which is the rate of deformation. So deformation, so deformation is theta here, and we take a derivative with respect to time, so rate of deformation. Now we have the definition of this thing from here. So this is something that we have written above, that this delta theta can be written as this expression. So you can bring the delta T on the left hand side. And what you find is that the tau X, Y, so shear stress in the X, Y plane, is proportional to the partial derivative of X velocity with respect to the space coordinate.

So this is a very specific expression that we have obtained. And we can now generalize it in two directions where the deformations are happening in two dimensions. So this is shown here. So for example, in here we have a deformation in Y and in X direction and as well as in the Y direction. So in two dimensions, what we can write is that the shear stress is proportional to this expression that we have just obtained plus a similar expression that is corresponding to the deformation in the Y direction.

Now, because there was a proportionality in between to match the dimensions, we multiply the rho and mu in order to obtain the equality. This expression is valued for two dimensions, and you can then write similar expressions for tau YZ and tau XZ. But as we noted before, we can use indices, say I and J, to simplify these expressions so that we don't have to write XY, YZ, and XZ differently. We write them in a compact form as tau IJ. So I then varies from XYZ and J also varies XYZ.

And this is the expression in 3D. For, again, for compactness, we can write the term in the brackets as one expression, which is, well, 2SIJ. So then the final expression becomes tau IJ is equal to rho multiplied by nu multiplied by SIJ, and there should be a 2 here. So in this manner, we have related the shear stresses tau to the rate of deformation. And we have called it SIJ, which is also called as strain rate tensor. So in this manner, we have obtained the second expression as well.

Well, there should be a 2 on the most right-hand side of the expression. And if you combine the first and the second equation, you will get the third equation, which is actually the conservation of momentum law. So what we have done is we have obtained an expression for the mass conservation and the momentum conservation. So we can summarize this talk now. So first, what we did is that we wrote how we can write the momentum conservation for a fluid element. Then it took us so far, but then we had to use the relation between the shear stress, so that is tau IJ, and the strain rate.

So that is SIJ. And we saw that led us to the final form of the Navier-Stokes equations. All right. Thank you very much. In the next session, we will talk more about the variations in the Navier-Stokes equations. Thank you. Thank you.

Want the rest of Turbulence and RANS Modelling?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Turbulence and RANS Modelling course

The remaining 46 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Turbulence and RANS Modelling course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.