Suspension Design using ADAMS course by Skill-LyncFree · 3 lessons · no payment

Suspension Design using ADAMS: 3 free lessons

Three free lessons from Skill-Lync's Suspension Design using ADAMS course. They cover the theory that comes before any modelling; ADAMS itself is not opened in these free lessons. The lessons explain degrees of freedom and the single motion path of an independent suspension, the main front, rear and racing suspension layouts, and how front-view and side-view instant centers and the instant axis control suspension geometry.

Last updated 16 Nov 2026 · 3 free lessons (35 min) · full course: 34 lessons (13 h 48 min), paid · ₹40,000

Lesson 1 of Suspension Design using ADAMS: Degrees of Freedom and Motion Path of a SuspensionFree lesson 1 · 4 minDegrees of Freedom and Motion Path of a Suspension

What will you learn in the free Suspension Design using ADAMS lessons?

  • Degrees of freedom and restraint in suspensions
  • Double wishbone, McPherson strut and multi-link layouts
  • Push rod and bell crank racing suspension
  • Instant center, swing arm length and angle

Free lessons you can watch now

  1. Free lesson 1: Degrees of Freedom and Motion Path of a SuspensionLesson 1 · 4 minDegrees of Freedom and Motion Path of a SuspensionThe instructor explains that an independent suspension has six possible degrees of freedom but is designed to leave only one, so the knuckle follows a single path. The lesson compares this with a solid axle and shows how five two-force links give five restraints, then sets three review questions.
  2. Free lesson 2: Why Suspensions Exist and Common Suspension ArchitecturesLesson 2 · 23 minWhy Suspensions Exist and Common Suspension ArchitecturesThe instructor explains that a suspension handles ride isolation and handling. The lesson then identifies parts on an Audi R8 double wishbone, an Audi TT McPherson strut, a twist beam, five-link and four-link multi-links, a solid axle and a push rod Formula 1 layout, and sets a comparison write-up.
  3. Free lesson 3: Instant Center and Instant Axis in Suspension GeometryLesson 3 · 8 minInstant Center and Instant Axis in Suspension GeometryThe instructor defines the instant center as the point the suspension links pivot about in front and side view, using a motorcycle swing arm as a true example and a car as a virtual one. The lesson then joins the two centers into the instant axis and discusses swing arm length and angle.

Which lessons of Suspension Design using ADAMS are free?

The first 3 lessons are free on Grow by Skill-Lync: 35 min of video from Skill-Lync's Suspension Design using ADAMS course that you can watch here at no cost: leave your name and phone number once and they play (as of 16 Nov 2026). The full course is paid (₹40,000); its other 31 lessons are listed in the outline below so you can see what each one covers.

How long is the Suspension Design using ADAMS course?

The full course has 34 lessons and 13 h 48 min of recorded video, plus the projects and assignments that come with enrolment. The free lessons alone take about 35 min, so you can finish them in an evening and decide whether to continue.

What comes after the free lessons?

Lesson 4 onwards is in the paid Suspension Design using ADAMS course on Skill-Lync, with mentor support and a certificate. For a career in Automotive, the Post Graduate Program in Hybrid Electric Vehicle Design and Analysis goes further with industry projects and placement support.

Liked the free lessons?

Get the full course syllabus and fees.

The full Suspension Design using ADAMS course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Suspension Design using ADAMS course

The remaining 31 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.