← Previous lessonFree lesson 2 of 3 · lesson 2 of 45Next lesson →

Unlock all 45 lessons of Structural Steel Connection DesignFull course ₹40,000 · paid

Price & syllabus
Free lesson · 28 min · no payment

Bolt Terminology, Black Bolts and Bolt Strength Grades Explained

A free lesson from Skill-Lync's Structural Steel Connection Design course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 2”

What will you learn in this free Structural Steel Connection Design lesson?

The instructor defines bolt parts such as head, shank, thread, grip and washer, then covers black bolts and turned and fitted bolts. The lesson shows how to read a grade like 4.6 as 400 and 240 N per mm2, and why net tensile area is 0.78 times the bolt area.

  • Bolt length, grip and washer purpose
  • Reading grades 4.6 and 8.8
  • Net tensile area as 0.78 times bolt area
  • Where black bolts should not be used

What comes after lesson 2?

The next free lesson is lesson 3, “High Strength Friction Grip Bolts, Slip Factor and Advantages” (26 min). Later in Skill-Lync's Structural Steel Connection Design course (paid): lesson 4, Week 1 Session 4; lesson 5, Week 2 Session 1; lesson 6, Week 2 Session 2. The full course has 45 lessons (20 h 36 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Hello, learners. Welcome to this week's topic of structural steel connection design. And this week, we have been seeing with the topic of connection design introduction and the bolted connections theory behind it. So what we have seen in the previous session is like we have seen the introduction of the connections, why connections are important, and what is the main significance of the connections. So the connections are to make the different elements of a building to act like a single entity. So the transfer of forces happens between the beam to the column and column to the foundations totally.

And these connections can be either welded or bolted since it is used very earlier and then it is no longer in practice. And these connections has to be simple, safe, and economical. And it has to be safe because these connections failure would cause a catastrophic failure and these connections are basically brittle in nature. And this could cause a sudden failure unlike different elements of steel which is ductile in nature which shows the symptoms that this beam is going to fail also. So this connection is very important as it causes a brittle failure and it can cause a catastrophic problem.

And even we discussed in earlier session about different types of connections. These different types of connections were basically based on the type of fastening and then based on the force transfer mechanism and also what type of force it is going to get transferred. And based on the fastening it is divided into bolted connections or welded connections and based on what type of force it is going to get transferred it is based on a shear connections or a moment connections or a compression connections or a tension connections.

And based on the force transfer mechanism it was classified into bearing type and then the friction type. So these were the quick recap of what we have seen in earlier session. So now let's get into much detail about the introduction to bolted connections. And now we are going to talk about the bolted connections. We are going to pick only the bolted connections now. We will see the bolted connections in the later part of this course. So when we wanted to get into the bolted connections as I said this bolted connection is the most commonly used connection because bolted connections can be dismantled.

So unlike other type of connections it can be removed once the building or a structure is served its purpose of life and then you wanted to use that element for some of the buildings then you can just let it open the connections which is a bolted connection and then you can reuse it. That is one of the main advantages of the bolted connections. So let us jump into the introduction of the bolted connections and what are the different types of bolts and all you will see in this session.

So coming to the first point a bolts can be defined as metal bar with head at one end and shank with thread at the other end to fix a nut. So here you can see a bolt is made up of metal bar. So the metal bar is nothing but a single rod which can be made up of metal bar which is made as a bolt so which is formed with a thread so we can form as a thread so this is a thread so it has a head so this is called as head so the bolt can be defined as a metal bar with a head at one end and shank with thread at the other end.

The whole part is called as shank whereas this threaded part of shank so this is called as thread and this thread is used to fix the nut so you know that when you wanted to fix a bolt you will have a nut so this is a bolt say for example and this nut will be going into the thread portion so till this end of the thread only the nut can go so between which we need to provide a proper washers and the connection and the connection and the connection and the connection and the connection and all so that we can hold the things in position so let me erase all these markings so the bolt can be defined as a metal bar with a head at one end and shank with thread at other end to fix a nut and that can be fixed only in the bolted thread part so I hope the first point is clear.

Coming to the next point the bolt length is the distance from shank end of the bolt to the washer near the bolt head. So what we will be using is like when a member is being connected like this so you have two members to say for example this is one plate which is having a force this way which is having this bottom plate is having the force this way you keep a nut on this one and then tighten it. This is a nut so we keep this assume this bolt hole so and then what we keep is a washer here so just below the head you keep a washer and just above this nut also you can keep a washer.

The washer's main purpose is to transfer this force for a bigger area like here the area is going to be less whereas providing a washer the force can transfer as for a bigger area so that load dispersion takes place very well. So that is idea behind the provision of washer and bolt connections so this bolt length is a distance from the shank end of the bolt to the washer near the bolt head so I will say this is a washer near the bolt head to the shank length so this length is called as bolt length.

So coming to the grip of the bolt to coming to the bolt. So coming to the next one which is a grip of the bolt grip of the bolt is the distance from behind the bolt head to the rear of the nut or washer. So as I said this you have a two element and you have washer here so the grip is a distance behind this bolt head to the rear of the nut or a washer. we will say this is a grip length up to here you'll be having a nut can keep a washer and then a connecting member so we even call it as a pillar plate also since the thread can go only up to this part so this distance is called as grip of the bolt so this grip of the bolt is very important because this is only is going to keep the two members intact held in position with this grip so this is grip length so we got clarity on what is a bolt length and what is the grip length of the bolt so coming to the next part there are steel washers provided in the bolt assembly one below the bolt head and one under the nut and the reason of the steel washers are for distribution of the clamping pressure so as I said already and then shown how the washers will be present these are primarily positioned just below the nut and above the washer so here you'll be providing under which you'll be having a nut here only you'll be having a member connected so the primary idea of having this washer is to distribution of the clamping pressure on the bolted member the larger surface area as I said this force has to just transfer for a larger surface area so that it is easy and then there is no much problem in transferring of forces so to understand this analogy let me give you an idea like you are going to this is a swimming pool so you are going to jump on a swimming pool with legs alone getting into it so it's like a point force whereas when you lay on a swimming pool falling with a flat surface for a larger surface area you get hit by the full body like a big force like a what I say a larger surface area is going to take part in the force transfer so in the same way when there is a larger surface area taking part the dispersion of forces can happen for a bigger area so instead of the force can happen only under the bolt hole this is going to be causing a less critical so that is the idea behind the placement of washers then the washers are used for preventing the threaded portion of bolt from bearing on the steel member this is also used some of the members steel members can undergo bearing and cause failure in the thread thread has this kind of portions so this area is very weak having a smaller cross section area so when a member is getting connected this can cause failure in this area so providing a washer can help this thread area to undergo a less impact by the members which is nearby so this members which is going to get moved here and there because of which this washer will be first impacted and not causing any problem to the thread of the bolt both these two things are the main significance of providing a washer and coming to the next point there are primarily three types of bolts used in the steel construction The type of bolts are as follows. So basically we use three type of bolts in constructions that are black or ordinary bolts.

To understand more on it, you have to refer IS-1363, where more specifications of this type of bolts have been given. The next one is a turned and fitted bolt, for which we have to refer IS-1364. So ordinary or black bolts are commonly used in small lighter trusses and lighter buildings and all. So turned and fitted bolts also been used in some places where the tolerances are very less. So we will see much in detail about this black or ordinary bolts and turned and fitted bolts in this session itself.

Whereas the next one is high strength bolts, for which we have to refer IS-3751 and IS-4000 codebooks. So these are an Indian standard for having more specifications on this type of bolts, for which we have to refer, when you are going to use this type of bolts. So I let the learners to get into the specifications and all these types of bolts in this codebooks, what, how it has been covered and all, with their scope. So let us cover overview on these different type of bolts and what are the different specifications that has been here in this topic.

Let's get into the type of bolts and see much in detail about each and every type of bolts. Coming to the black or ordinary bolt initially. So the black bolt are generally used for lighter structures, as I said earlier. These bolts are mostly used in lighter structures, which are subjected to stationary loads and for secondary members such as purlins and bracings and for roof trusses. So a building is made up of beams and then columns. And then you have a base plate and you have foundation.

So this beam can be, even if it is a long span, this can be made up of truss. And for later stability, you can even have a bracing. So when there is a stationary load, where there is no much of impact, these type of black or ordinary bolts are utilized. Mostly in connection of these trusses or the bracings or secondary members such as purlins. Purins are nothing but a member, which is going to support a roof sheeting. So it will be present on the rafter like this.

So these are rafters. So on the rafter, this is going to support the roof sheeting on it. So this is the idea behind it. So here we will be using mostly the black or ordinary bolts. Next comes the black bolts are not recommended for connections subjected to impact load, vibration and fatigue. So these type of bolts are used only in terms of stationary loads. As the impact load is of stationary load. But there is a sudden increase in the load because of a surge load or a braking load, which most commonly we see in gantry girders and all.

In gantry girders or crane girders, what will happen is like a crane will try to move in this direction. So this is the eye section. Suddenly when it gets stopped, there will be a jerk happening on it because of which you will be having a lateral force. So this is an impact force. This impact force and this will cause a sudden problem in this type of connections. So here and all, we need to probably avoid a black or ordinary pulse. Now another case is like in the place of vibration and fatigue.

This vibration is most commonly seen in the machines where you will be having a pedestal and then you will be putting it on a skid. We have a beam over which you place an equipment. We call it a skid beam. So this is an equipment. This is a skid beam. So when this machine is getting operated, it undergoes vibration. So when this vibration is happening, the bolt under which can undergo a type of vibration. And in this category also, the black bolts or ordinary bolts are not recommended.

Next comes the fatigue. Fatigue is nothing but a small load which is happening in a cyclic manner, which can cause a problem. As most commonly seen, this type of fatigue are in offshore structures. In offshore structures, when you have a waves hitting on it, hitting on a column. Let us say this is an offshore rig top head. When the waves is hitting on it, so it will try to move. So when it tries to move and come back, this small force, which is going to act in a longer period of time in a cyclic manner.

So this can cause a problem. And here also, the ordinary or a black bolt is not recommended. And these black or ordinary bolts are forged from low carbon rolled steel circular rods. So low carbon rolled steel circular rods are nothing but a mild steel rods. So mild steel are a low carbon steel, which has a yield strength of 250 megapascal. So this is a low carbon steel rod from which it has been made up of. So in extending further, these bolts are available in sizes from 5 to 36 mm in diameter.

And this can be designated as M5 to M36. M means a metric. 5 defines the diameter of the bolt. So M5 bolt, if anyone says that it is a 5 mm diameter bolt. So M10, M12 is also available. So most commonly used bolt sizes are ranging from 12 to 36 mm diameter. So that's why these bolts have been presented below. So with which 16, 20, 24 and 30 are most commonly used. Above which, instead of going for a bigger diameter, 36 diameter bolt, we provide more numbers of 16 diameter bolts versus the equivalent forces.

So most commonly used bolts are M16, M20, M24 and M30. Here, when you see the net tensile area for threaded bolt to be considered are 0.78 times the area of bolt. Why this 0.78 times? Just because you can see a bolt is going to have a shank and then thread. As I said already, this is going to be shank, then it is going to be thread. They're going to keep a nut only up to this thread area. So this is subjected to a bearing and when a tension force is going to occur also, the area which is going to be present is very less than that area of the shank.

So say for example here, 20 or 10 or 16 diameter, everything belongs to a shank diameter. Say if this is 16 mm and the area of 16 mm will give you certain value from which only 0.78 times the area only said to be present in the thread area. So because of which only the net tensile area for threaded bolt to be considered only 0.78 times the area of bolt. The area of bolt is nothing but the area of a bolt with shank diameter as represented in M5 to M36 in the mm.

So the value for standard bolt sizes are given below. For example, for a bolt size ranging from 12, 16, 20 to 36, by using a 20 mm diameter, by having a 0.78 times pi by 4 into 20 square, you will get value around 245. So this is a tensile stress area taken from the net area in the threaded portion. So coming to a black bolts, which are generally of grade 4.6. So as I said that bolt can be represented as M20, M16 or so and so, where this will define the diameter and this will define the metric.

So M20 means 20 mm diameter bolt. In addition to that, we need to specify the grade of the bolt also. So the grade of bolt is 4.6. This 4.6, how we have to understand is like the number before decimal indicates 100th of the nominal ultimate tensile strength. The nominal ultimate tensile strength is nothing but the maximum strength that the bolt can hold in tension. So when it reaches the ultimate tensile strength, the bolt is subjected to undergo failure by breaking or rupture. So the value just before this decimal, which is 4, which defines the 100th of the nominal ultimate strength, which means the nominal ultimate strength of the bolt is said to be 4 into 100, which is 400.

So 400 newton per mm square is the ultimate tensile strength of the 4.6 grade of bolt. And the number after decimal indicates the ratio of yield strength to ultimate stress expressed as a percentage. So I will say this value next to it, say, for example, it is 0.6. So which gives the ratio of yield stress, which we wanted to know, yield stress to the ultimate stress, which we have calculated saying so this is 400 since we are taken as a 1 by 100. So yield strength will is nothing but 0.6 times the 400, which is comes around 240.

So so it's clearly defined that the first part of this grade defines the 100th of the ultimate tensile strength, whereas second part defines the ratio of the ultimate strength to the ratio of yield strength to the ultimate strength. Defined in terms of percentage. Thus, we get the ultimate strength of 4.6 bolt as 400 N per mm2 or 400 MPa and yield strength is 240 N per mm2 or 240 MPa given from 0.6 times of 400. So, it's clear that from how we can interpret the ultimate tensile strength and then the yield strength of the bolt.

Say, for example, you take a 8.8 great bolt. In this case, 800 will be ultimate tensile strength and 800 into 0.8 which will be around 640 N per mm2 as a yield strength of the bolt. So, once it reaches the yield strength, the bolt will undergo yielding. As you know that yielding is nothing but a distortion of the shape showing proper strain hardening region after which it undergoes a rupture at the ultimate tensile strength. The ultimate tensile strength is the maximum strength that a bolt can hold.

Once it reaches the yield strength itself, the material starts yielding. So, the yielding also said to be failure in case of a shear force. Whereas, for rupture to happen, you need to reach up to tensile strength. So, these two strength is very important when you are going to go for a connection design. We will be covering much in detail about the connection design in later part of this course. So, at that time, when I define it as a 4.6 great bolt, it is going to be 400 N per mm2 as an ultimate stress and 240 N per mm2 as a yield strength.

So, this will give you a gentle idea about these definitions. Following are the advantages of black bolts in comparison with reverts or welded connections. So, I am going to present the advantages why these black bolts are used where the welded or a revert connection can be avoided. Just because, to use a welded connection, you need to have a very skilled labor. So, unlike here in black bolts and the use of unskilled labor is more than enough. And simple tool is used in comparison to that of welding and high strength bolts.

Since because, for which to be happening, like you need to have a welding machine with electrodes. And then a welder need to be there with a classy welder and he need to, without any cracks on the weld or a bubble or any kind of welding abnormalities need to be avoided. As a bolting is straightforward, you just place a bolt and then tighten it. So, even high strength bolts need a torque value. Here, it is not required. That's why the unskilled labor is even enough for using a black or ordinary bolt.

The next point is a noiseless and quick fabrication. So, as it needs unskilled labor is more than enough, it can be done quickly fabricated without any proper tightening that has been required. Since there is no tightening involved with the torque value, it's a noiseless operation. And no special equipment or process needed for installation. It is straightforward. You just need not have a rickets or a venches to tighten to a certain torque value. So, very ordinary equipments are more than enough to be used in tightening of the bolts in fabrication yard.

Next one is a fast progress of work. As I said, it's a quick fabrication because of which it's going to be a fast progress of work. And then the fast erection is going to happen in sight. It accommodates minor discrepancies in dimensions. This is going to take care of the tolerances for a high tolerances since the minor discrepancies in dimensions also can be accommodated by using this type of bolt. So, that is also one of the main advantages of this one. The next one is the connection starts supporting the load as soon as the bolts are tightened.

So, unlike in other type of connections where the welded connections, the welding need to be checked, whether it is good enough to transfer the forces and the quality of weld need to be ascertained. Here, once the bolting is done with the required numbers, the connection starts supporting the load once it has been done and tightened. So, there is no back-end process unlike in other areas. So, that's why the black or ordinary bolts are most commonly used in light loaded structures which we come across in day-to-day lives.

So, coming to next type of bolt. So, which is turned and fitted bolts have uniform shanks and are inserted in small tolerance drilled holes and made snug tight using spanners. So, here it need to be noted that it is a small tolerance drilled hole it has been used. So, unlike black bolts which we have seen earlier, here it need to be having a small tolerance drilled hole. You can't have a bigger diameter hole. So, only 1.5 to 2 mm larger than the diameter need to be provided to which the bolt need to be provided and need to be snug tight.

Snug tighted means it has to be hold in position without any loosening and then any movement of bolt is not recommended. That is what it means the snug tight using spanners. Here, the diameter of hole is 1.5 to 2 mm larger than the bolt diameter for ease in fitting. So, when you have a 20 dia bolt, if you put a hole for 20 dia, you can't fit it. So, it won't go inside because of the little bit tolerance. So, you need to provide little bit extra contingency in the diameter of the hole.

So, that is mostly ranging from 1.5 to 2 mm only larger. These are similar to black bolts. So, it is also made up of mild steel which is low carbon steel. The only differentiated from the ordinary or black bolt is like the shank of these bolts are formed from the hexagonal rod. If there is a round rod, it is a hexagonal rod here. So, these are not most commonly used in buildings. Mostly, black or ordinary bolts or high strength friction bolts are only used. These bolts is just for your understanding of one of the type of the bolts.

This has been presented. So, with this session of week 1's topic on introduction to connection design and bolted connection design philosophies is being hindered. So, in this session, we have seen about what is bolted connection, what is the advantage of bolted connection, and what are the types of bolted connections, which means that what are the different types of bolts that is being present. So, in which we have covered turned and fitted bolts here and then before which ordinary or black bolts have been seen. So, ordinary and black bolts are most commonly used in light structures to connect the trusses or bracings or beams.

These bolts are ranging from 8 to 30 mm diameter, which is represented from M8 to M30. Most commonly used are 16 diameter, 20, 24, 30, 36 and all you will be using it. These bolts have a blade represented as 4.6 or 8.8 so and so on, where the first part 4 represents the 100th of the ultimate strength, whereas the second part defines the ratio between the yield strength to the ultimate strength. The 4.6 grade is going to have 400 Nm square as the ultimate strength and 240 Nm square as yield strength and those are made up of mild steel rods and here turned and fitted bolts have a very less tolerances.

And these bolts are used where the snug tight has been recommended and these have a hexagonal rod. That is the only difference from the earlier black or ordinary bolts. So, thanks for listening and next session we will be seeing much in detail about HSFG bolts and other topics on bolts. Thank you. Thank you.

Want the rest of Structural Steel Connection Design?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Structural Steel Connection Design course

The remaining 42 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Structural Steel Connection Design course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.