← Previous lessonFree lesson 6 of 6 · lesson 30 of 51

Unlock all 51 lessons of Regulatory Process, Standards and Certifications for Medical DevicesFull course ₹40,000 · paid

Price & syllabus
Free lesson · 28 min · no payment

Reading an ISO Standard: Clauses, Shall and Should, Development Stages

A free lesson from Skill-Lync's Regulatory Process, Standards and Certifications for Medical Devices course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Module 9 Session 3 - Standards - 1”

What will you learn in this free Regulatory Process, Standards and Certifications for Medical Devices lesson?

The instructor walks through the contents of a standard, from foreword and introduction to clauses 4 to 8 of ISO 13485, and explains the verbal forms shall, should, may and can. The lesson also separates national and international standards and describes the ISO development stages, with ISO 13485:2016 at stage 90.93.

  • Contents and clause layout of a standard
  • Meaning of shall, should, may and can
  • National versus international standards
  • ISO stage codes and the five-year review

What comes after lesson 30?

Later in Skill-Lync's Regulatory Process, Standards and Certifications for Medical Devices course (paid): lesson 31, Module 9 Session 4 - Standards - 1; lesson 32, Module 10 Session 1 - Standards - 2; lesson 33, Module 10 Session 2 - Standards - 2. The full course has 51 lessons (22 h 57 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

This is session 3 of the course, Standard Certification and Accreditation. The basic structure of standards also would include the contents part, which in general the contents would have the forward. We just notice, if we go back to the previous slide, we just notice that there is contents. There is contents here. So, we are expanding the contents part here. So, contents part would include, in general, the forward. It is basically the information about the development of the standard. Then, the next part it would include would be the introduction, like the clarification of several concepts and terminologies, like emphasis on the risk-based approach and the process approach.

We will discuss this risk-based and process approach. Or, PDCA we have talked about. Do you remember PDCA? Plan, do, check, and act. So, PDCA and relationship or comparison with other related standards as applicable. And so, it would have the introductory part. Once you read this, you will basically understand. It will form basic understanding, based on which you will be able to interpret the standard very easily. So, therefore, introduction, one must read. Reading a standard, although should not start in between, start from the beginning. So, forward the introduction.

And then comes the requirements. Within the requirements, there would be different clause numbers, like scope, references, terms, and definitions, elements, basically requirements for implementation of the standard, and so and so. So, it could be clause 1, which is scope, it could be clause 2, which is references, normative references, it could be clause 3 for terms and definitions, and then clause 4 onwards normally become the requirements for implementation. Like 4 to 8 are the implementation requirements. In general, this is the trend for most of the standards, ISO standards.

There would be several verbal forms used in the standard, like the word shall. Shall is a requirement which needs to be fulfilled. The best way to understand the standard is to read the standard and read the requirements of the standard, as I said, clause 4 to 8 for 13485, and then underline the word shall wherever it is repeated. Then you will see how many requirements are there, which must be complied. If they are not complied, they would go as a non-conforming situation, and that could be the reason of suspension or withdrawal of the license.

There would be should used, but should is basically a recommendation. You may implement, you may not implement, but the shall requirement has to be implemented. Then somewhere the word may is provided. So, it is basically the permission is allowed. You may do this. And then somewhere the word can is used. It's either the possibility or the capability. So, possibility or the capability. And then somewhere there would be nodes. Nodes would be basically within the standard requirements, there would be some points, nodes, which is like guidance in clarifying or understanding the associated requirement of the standard.

So, when you read the standard, you may find the word shall, which is a requirement. You may find the word should, which is a recommendation. You may find the word may, which is a permission. You may find the word can, which is a possibility or capability. And you may find the note, which is helpful for implementing or understanding the requirement. So, we have understood the structure of standard briefly. I already suggested that you open the standard 13485 and look at it and how it is structured on what we have mentioned here.

Open any other standard ISO standard. You would say more or less same numbers would vary. The requirement numbers would vary. The clause numbers may vary. But more or less, the structure remains the same. So, having done that, let's have a look at the types of standards. There would be several types of standards, several ways in which the standards can be classified. So, one simplest one is national or international. So, for when you are talking about India, it's national, it's beauty of Indian standards. They have established standards, which we call Indian standards.

So, maybe these are internal or international. You may say ISO standards, like 13485 is international standard. 9001 is international standard. So, this is the primary classification of the types of standards. And let's see the examples we have here. There is a national standard published by BIS, which is IS23485 Medical Devices, which is Quality Management System Requirements, Essential Principles of Safety and Performance for Medical Devices. It is the internal standard. It is the national standard. Let's take an example of international published by ISO, which is ISO 13485 2016 version for medical devices.

And it reads, its title is Quality Management Systems Requirements for Regulatory Purposes. So, one is national, one is international. Okay. Another way to classify these types of these standards could be either it is a certification standard or it is an accreditation standard. Let's say, for example, certification where companies, where organizations that are doing business or manufacturing medical devices, they want to get certified to ISO 13485 or to ISO 9001 or to ISO 14001, etc. So, these standards are certification standards because certification bodies, certified bodies would come and perform audit to certify them.

And they can claim that, yes, we are certified. So, these are the certification standards. Accreditation standards are one step up. We will further understand this process. But these are 17-0-21, 17-0-20, 25-24, etc., etc., many more. So, these are accreditation standards. Like, let's take an example. You are a manufacturing company. You approach a certification body. And then you tell them that we want to get certified to ISO 13485. So, the certification body will come and audit your organization, your management system. And then if you are certified, if they are certified, they will issue the certificate.

And then your company will be certified to ISO 13485. But that certification body would be accredited by 17-0-21 because they would be implementing ISO 170-21 to become a certification body. And therefore, they are accredited by 17-0-21. And accreditation body will come and verify the compliance against 17-0-21. If they are found okay, they are called notified bodies or certification bodies. And then they have authority to perform ISO 13485 certification. Anyway, once we move to the from standards, once we move to the certification and to the accreditation part of this course in subsequent modules, it will be very clear what is the difference between certification and accreditation.

But for now, to classify the standards, you may remember that there could be a certification standard and there could be an accreditation standard. Accreditation standards are one step higher. There would be scheme-specific standards. For example, for quality, it is 9001. For quality of medical devices, it is 13485. For quality of medical devices, it is 13485. Environment it is 14,001. For occupational health and safety is 45,001. For competence of testing and calibration laboratories is 70,025. So likewise it could be scheme specific. Then it could be system or product specific.

For example, system standards are to certify the management system. They are not to certify the product. Like ISO 13485-2016 is for quality management system of medical devices. So this is a system standard where the management system is established based on the standard and accordingly it is implemented. And then it is certified. The other one is the product standard like food safety standards, electrical products related standards, etc. Like 6061-1-2 and its collaterals. Basically, these are particular standards. These are IEC standards which are electrotechnical standards which are purely technical. So these are product based, product related.

So the difference here is the product and here is the process. This is a system. There is a process. There will be resources. There will be controls. There will be verification. When all this thing is defined and implemented, it is basically a management system. Finally, finally it ends up in giving you the product. So standard, is it talking about this or is it talking about the product specifications, qualifications. So it because standard becomes either the product standard or the system standard. It could be system or product or system or technical. For example, you have system which is quality management system 9001, 13485, etc. We have talked about it.

But see, ISO TS is a 17518 medical laboratories reagents for staining biological material. ISO TS 23128 medical devices, transfusion set and blood back compatibility test method. See, this is some of the examples. There are several such. So these are very specific technical standards. Within technical standards. Within technical, you also get IEC standards, which are called electrotechnical standards. So it could be a management system standard or a technical standard. Let's see the next one. It could be voluntary or mandatory. For example, ISO 9001, 14001, 13485, etc. are voluntary standards.

In fact, 9001 and 14001 are voluntary. But over a period of time, 13485 for medical devices is becoming mandatory. In some countries, it is mandatory. In other countries, it is slowly getting mandatory. And that is why the title of the standard is for regulatory purposes. So 13485 go here after some time. Okay. For the mandatory ones, usually accreditation standards, product standards are made mandatory by country federal laws to exercise controls. So these could be product standards, basically, or it could be the very specific collaterals like 6061-1-2, very specific standards for electrical medical devices.

In some countries, they have made it mandatory. It has become a regulatory requirement. So it could be voluntary or mandatory. This, it depends on the country and its regulations. Standard could be activity or product based. For example, you have the welding standards, AWS standards are welding, American welding standards is AWS standards. It could be petrochemical like API standards could be petrochemical industries related standards. It could be API, it could be medical relevant to ISO and BIS standards. You can search for medical standards and you will get a list of medical standards under ISO or BIS.

It could be PPE or scaffolding. Some countries have established specific standards for this. It could be calibration related like ISO 11095 linear calibration, ISO 8466 water quality, etc., etc. So it could be either product or activity related also. Having understood the types of standards, the basic qualification, different qualifications are there. So we have understood the structure of standards. In fact, we have understood the purpose of standards, the benefits of standards, the elements of quality, customer focus, and then the types of standards and the structure of standards having done this.

And several times we have talked about national standards and international standards. The basic classification that we have done for standards are national and international. So let's talk about the national standards body and international organization for standardization that is ISO. So in India, national standards bodies would mean BIS and international organization for standards is internationally recognized as ISO. So let's talk about this and try to understand their roles. These are bodies responsible to develop, publish, revise standards. Standards are initially developed. We will see how they are developed and then they are published, made available to the users and to the verifiers and to the training institutes.

So they are developed, published and over a period of time, normally it is six years, fifth year, the review starts. And generally, standard undergoes revision, six years, not necessary, but the process starts in the fifth year. If there is no revision required, they won't revise, but the review process will start the fifth year. So these bodies, national standards bodies or international organization. So national is beauty of Indian standards and international is ISO. So the responsibility of these is to develop, publish and revise standards. So the national we said beauty of Indian standards, BIS, you could always look at this website, www.bis.in.

And for international, just go and browse www.iso.org, which is for ISO. The best thing to do is browse these websites and look at different tabs as to what information is available on this. It's very important. You should get used to these websites. The national standards body, BIS, is responsible to develop, publish, revise national standards in India. It also, the BIS, also provides certification services. It is a certification body. It provides certification services for management systems and also for products. In addition to this, BIS also provides trainings, management system trainings, auditor trainings and technical trainings.

BIS also provides the platform for the purchase of national and international standards. So if you want to purchase national standard, Indian standard, you should go to BIS website and you will be able to purchase. Not only this, if you want to purchase any ISO standard, you have options. You can either go to ISO store or you go to the BIS and from BIS also you can purchase the international standards. Let's talk about the International Organization for Standardization, ISO. It was established in 1947. In 1947, that was the official existence that it came into, 1947.

Worldwide Federation of National Standards Bodies, ISO member bodies, it consists of 167 national standard bodies. When I said last time, ISO development, standard development is contributed by several countries. And look here, 167 national standard bodies are members of the BIS. Here they would participate into development, revision or improvement of these standards, the international standards. ISO is Independent Non-Governmental International Organization. Independent means it will not favor any country or any business sector. It is independent because it takes inputs from 167 national standard bodies. It is non-governmental yet international organization recognized by all these member countries and other countries, associated countries.

ISO is responsible to develop, publishing, revise ISO standards. We talked about this. It also provides the platform for purchase of ISO standards and you can always search in store and purchase the www.iso.org. You can purchase, you can go to the store and you can search and you can purchase. So, that's the information about ISO. Once again, I would say the best thing possible is to go to these websites, browse them, try to get as much information as you want and then try to download what all standards you are in need of.

You will get used to this. So, we have seen the responsibilities of ISO and BIS and primary responsibility is to develop standards. So, let's try to understand the standards development process. So, how standards are developed at ISO? Let's try to understand this. So, how standards are developed at ISO? Let's try to understand this process. Preparation of international standards generally through ISO technical committees. The first thing happens is that, primarily, the first thing is the industrial need is there where the standard needs to be developed and therefore committees, established technical committees are established and technical committees will prepare the ISO standards initially.

Relevant member body represents the technical committee. How? Like for ISO, there are 167 member bodies, one of which is India, which is BIS. So, BIS is also contributing to ISO. So, the relevant member body represents the technical committee. Now, whichever is the relevant, if it is related to electrical or mechanical or based on the discipline, relevant member body is taken into consideration to represent the technical committee. Then, other international organizations like governmental and non-governmental also contribute. This could be authorities basically. So, and maybe the national authorities or the statistical research institutes, the colleges, research institutes, they also contribute to this.

They are, they also are associated with this process of development of the standard or improvement of the standard. So, they also contribute ISO collaborates with international electrotechnical commission, IEC, on all matters of electrotechnical standard. All those IEC standards, which deal with electrotechnical requirements, they have to be referred to this IEC committee. So, they get input from the IEC as well for development of these standards. And finally, what you get is, this is the international harmonized stage code. This is available on the website. You could always see there are different stages.

The preliminary stage, then the proposal stage, the preparatory stage, the committee stage, the inquiry stage, the approval stage, the publication stage, review stage. And after review, maybe if the new standard is published, withdrawal stage of the old standard. So, these are the basic stages of the standards life cycle. Now, within the stage, there are sub-stages classified like registration, start of main action, completion of main action, repeat the earlier phase, repeat the current phase, abandon, proceed like this. So, these are decision phases, basically 92, 93, 98, 98 are decision processes and 0, 20, 60 are also the sub-stages, but are not decision, but 90 specifics are decision processes.

So, the standard goes through these life cycle. For example, ISO 13485, 2016, the stage code is 1993. Currently, it is a 2016 version, which you will see 2016, it should start with the review in 5 years. So, it is 2021, it should start with the review and it is 1993, international standard confirmed. It is confirmed, the review has started. The international standard confirmed, review stage, repeat current phase, this one. This is it. How we get it? It is a review stage, 1993, international standard is confirmed.

It is a review stage and you go here back, repeat current phase. So, 2016 version will continue further. It has been reviewed and they have found that no further changes are required. So, this stage will continue and at 1993 means, it is reconfirmed and this will continue. The decision is repeat current phase means, the 2016 version will remain. If there was a change, then it would say that, okay, the standard would be changed, proceed to change and then abandon the old one, withdraw the old one.

So, currently 13.485 is at this stage, which is 90.93. Like this, you can go to the website and look at the standards of your interest and what are their current phases. This stage code provides you the overall flow and different steps of the standard development and review, revision process. And you can see of standard of your interest as to which stage it is in. This is the end of session three of the course, standards, certification and accreditation.

Want the rest of Regulatory Process, Standards and Certifications for Medical Devices?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Regulatory Process, Standards and Certifications for Medical Devices course

The remaining 45 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Regulatory Process, Standards and Certifications for Medical Devices course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.