← Previous lessonFree lesson 5 of 6 · lesson 29 of 51Next lesson →

Unlock all 51 lessons of Regulatory Process, Standards and Certifications for Medical DevicesFull course ₹40,000 · paid

Price & syllabus
Free lesson · 27 min · no payment

Quality, Customer Focus, PDCA and the Structure of a Standard

A free lesson from Skill-Lync's Regulatory Process, Standards and Certifications for Medical Devices course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Module 9 Session 2 - Standards - 1”

What will you learn in this free Regulatory Process, Standards and Certifications for Medical Devices lesson?

The instructor defines quality as the extent to which customer requirements are fulfilled and works through a weighted scoring example for a blood pressure monitor, with accuracy at 40 out of 100. The lesson introduces plan, do, check and act, then begins describing the structure of a standard using ISO 13485 as the example.

  • Quality defined as meeting customer requirements
  • Weighted customer satisfaction scoring example
  • PDCA as the basis of continual improvement
  • Number, edition and date on a standard

What comes after lesson 29?

The next free lesson is lesson 30, “Reading an ISO Standard: Clauses, Shall and Should, Development Stages” (28 min). Later in Skill-Lync's Regulatory Process, Standards and Certifications for Medical Devices course (paid): lesson 31, Module 9 Session 4 - Standards - 1; lesson 32, Module 10 Session 1 - Standards - 2; lesson 33, Module 10 Session 2 - Standards - 2. The full course has 51 lessons (22 h 57 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

This is session 2 for the course Standards, Certification and Accreditation. Let's move to the next topic of our agenda point. We have just covered purpose and the benefits of the standards. Now we'll have a look at elements of quality infrastructure and the customer focus. So, before we go into that, we talk about quality, quality so many times. So, let's try to define the word quality. Can you define it? How would you define it? The best way that standards have defined it is the extent to which customer requirements are fulfilled. Because what happens that quality is relative term.

We talked about this. When we both of us go to a same restaurant and order the same food. But then what I am expecting would be different from what you are expecting. And therefore, at the end of the service, if the hotel manager asks us, how was the food? I would rate the quality based on your requirements. So, therefore, quality is relative. So, the best way is to extend to which the customer requirements are fulfilled. That's how the quality is defined. Let's have an example here. Let's determine a few requirements of a medical device that you need for customer satisfaction. Like, suppose you are manufacturing medical device. In fact, you are employed in a manufacturing company of medical device or you own a medical device company.

So, you want to assess the customer satisfaction. So, how would you do it? In fact, you want to assess the quality of your product. So, you have to assess the customer satisfaction. So, let's see what parameters you would need for customer satisfaction. Like, what customer is looking for. So, for a medical device, what the customer is looking for is accuracy. Accuracy. If you are to purchase a BP monitoring machine, what would you be looking at? Your BP is 120 to 80. It should reflect 120 to 80. You may get a cheaper quality or a very fancy type of BP machine.

And then your BP, it is showing 160 to 120, whereas it is 120 to 80. So, it is disastrous because further actions are going to be taken based on the readings that we have received from the medical device, diagnostic device. And therefore, it is a very high risk. So, you cannot compromise on the accuracy of the medical device. I hope you agree this point. Secondly, you would want it calibrated one maybe because you want to ensure that it is reflecting the right reading every time. At all the entire range, it has to reflect the right reading. So, calibration. Maybe the third quality parameter you would set as easy maintenance because the customer, when it has purchased the medical device, you would definitely be asking as to what are the maintenance processes and how it is. Is it easy or every time you have to bring a person from outside and or maybe you have to send the medical device to the company for maintenance.

So, how is the process? Is it easy or is it difficult? Of course, availability of spares is equally important because if there is a breakdown, then you need the spares and are the spares available? Otherwise, you will have to keep a spare medical device for you in a hospital. So, therefore, availability of spares is very important. And then, okay, one more issue, it should be easy to operate. Like when the medical device is delivered to the customer, then you send a technician or an operator to provide the customization and training to the persons who are going to operate it.

And then they have to, the company has to develop a process of further training to whoever comes as an operator subsequent to the existing operator. So, training of tutor and then further it goes to the operators. So, how is it? Is it easy to operate? Is it easy to train? Is it easy to pass on? So, is it on the job training? Or you have to send a person 2000 kilometers away? So, it depends. So, that's all you may evaluate whether it is easy to operate.

So, what there could be several such, maybe 20, 25 such parameters, which could be important for a medical device and which one as a customer would be looking or as a significant satisfaction criteria. So, but for an example, we have taken only five here that to assess the quality and to assess the customer satisfaction, you will evaluate your medical device based on these five parameters. So, here let's set importance or weightage levels for this. These are the same accuracy, accredited calibration, easy maintenance, availability of spares and easy to operate.

So, I have set up based on my impulse, but then you could always judge which is more important. For me, I felt that accuracy is very important. So, I put it at 40 weightage. Out of the 100, you can make a total of this 40 plus 20 plus 10 plus 10 plus 10 plus 20 is 100. Out of this 100, I put 40% on the accuracy because I said it's a very high risk item because the measure based on the measurements, the doctors are going to diagnose.

Therefore, therefore, if these readings are faulty, diagnosis could be faulty and the medical treatment could go adverse. Therefore, it is the accuracy which is utmost importance to the medical device and therefore we say 40%. Secondly, the calibration. Calibration, it should be calibrated by an accredited calibration company. So, there I put 20. We will later on understand what is accredited calibration company. But once we say accredited, that means it is traceable to traceable to measurements are traceable to national and international level. So, then I would say I put it as 20. Then easy maintenance, I put it 10%. You can have your own judgment. You could put 20 or whatever way you want.

But what is important is you should be able to judge as to how to spread these weightages. Availability of spares, you say, okay, 10%. And then easy to operate, I would rate it at 20. Because the operation purchases one time. But operation is day in and day out several times. And it may work in the shifts and different operators will come at different times. And one person leaving and other person joining. So, every time you have to train. So, every time you have to train an operator. And if the operation is not easy, this process would get difficult and you may end up into more of a non-complying situation.

Therefore, easy to operate is easy to operate. I have put it at 20%. The total you can make it is 100%. So, from my point of view, accuracy is at most important. The next level is accredited calibration and easy to operate. These are more or less same level. And then easy maintenance and availability of spares. Each I have put 10%. I feel they are the lower priority than the other ones. You can decide on your own. This is just my judgment. Again, it would vary from medical device to medical device.

Once done, then start giving the score. You ask your customer that, okay, give the score. So, you have the score. So, accuracy. Someone says that, okay, I am 75% satisfied with the accuracy. So, he puts you 30 against this 40. So, he has cut 10 marks here. And then you have provided an accredited calibration certificate. So, the customer says, okay, 20 out of 20. Then easy maintenance. He says, yes, it is easy to maintain. Availability of spares. He feels that. Thank you. I'm here to go, yep.

That means he does not know a job. I'm here, bro. Spares are not available, some spares are available and for some spares he has to make follow-up and you have to get by courier and till such time the machine, the medical device was down and to counter that the company had to purchase one more medical device as a spare to avoid this downtime due to non-availability of spares and therefore he is rated at 5 and then easy to operate here again he says oh it's very clumsy difficult to operate and not only difficult to operate the brochure given to us it is not very clear and then we are unable to provide training of other operators it's very difficult and and then we have to send our operator to your premises to to the supplier's premises to only then they are getting sufficient training so such problems could be there and therefore the customer has rated only 5. Now you will see in the accuracy he got 30 out of 40 this is 75 percent but accurate you got 100 percent easy maintenance you get 100 percent availability of spares you get 50 percent and easy to operate it's just 25 percent So when you further analyze this so when you further analyze this what you could see here is now you could total it and how much is the satisfaction this all out of 100 and now you have the quantitative value of the quality which is 30 plus 20 plus 10 plus 10 plus 10 it's 70 percent So satisfaction of the customer is 70 percent and so your quality is 70 percent this is the quantitative assessment of the quality which is basically the quantitative judgment of the customer satisfaction Now you remember the definition quality we said the extent to which the customer satisfactions are fulfilled so customer wants these and only up to this extent the customer satisfaction customer requirements are fulfilled and therefore there is a shortfall here there is a shortfall here there is a huge shortfall here and finally the shortfall came out of 20 and the quality came out of 20 and the quality came out to be 70 this is one way there could be several ways of determining the quality but the experts say that nowadays try to quantify quantify because we say if you quantify you can plan to improve they say if you can't measure you cannot improve so therefore to improve you must know your current status and then you can analyze as to where to improve and then finally you can improve but then it is necessary to quantify So what we have done is we have tried to quantify the quality here considering this case if you analyze you scored 75 percent in accuracy so you need to increase the accuracy as a priority level there is one more significant shortfall which is easy to operate it is 20 percent weightage of which only five with 25 percent satisfaction is there so there is a scope of improvement of 75 percent you have a loss of 15 points here so how you would you make this equipment to operate easily so it's a design aspect possibly or maybe the customization aspect whatever so this the technical team should discuss this think over it and try to attack one this point and the second accuracy and the third point if the third priority if you want takes it is the availability of spares if you do that and then again you start supplying to the customers and then inform the customers that we have improved our processes whereby accuracy has gone up whereby the availability of spares is now is available 24 hours is now is available 24 hours x talk and then easy to operate it's a we have we have beautiful video as to how to operate and it's very easy for you people to understand so once you do that and then try to again get the feedback from the customer there's no reason why you should get this low score availability of spares and in accuracy and then you could say that quality has improved so unless you quantify you cannot plan to improve therefore this is the basic element of the quality infrastructure and which is basically the customer focus some terminologies we must you must understand when we say requirements it is both stated non-stated and legal basically stated non-stated and legal how it would be what to purchase a car and then the stated requirement is it should be a five sitter it should be running by petrol and it should have a mileage of say 20 kilometers or say 20 kilometers or more something like this and you have those requirements which are stated so you find it and there could be non-stated requirements you do not state that it should have a piston it should have a brake it should have ABS but then what all is non-stated but it is necessary for the product should also be considered as requirement and not only this it has to meet or regulatory requirements so considering a medical device you could always list out for a medical device the requirements that are stated and non-stated both as well as legal requirements in some countries the electrical equipment they have to comply by the 66-1-2 and further collateral standards also they have to comply by those and they have made it mandatory so therefore the requirements are varying are changing but then while determining the requirements to determine the quality it is necessary that both stated and non-stated as well as legal requirements are taken into consideration and then quality customer focus this infrastructure it applies to tangible as well as non-tangible products what are these tangible and non-tangible you purchase a medical device you have placed a purchase order and you receive the medical device so you have received a product which is tangible physically you can see it like this wristwatch you can see it physically but the training it is non-tangible where there is no transfer of any physical substance but it's a knowledge so knowledge is considered as non-tangible but the ISO definition for the products it considers tangible as well as non-tangible now let's see the customer customer ISO says that it's all interested parties now interested parties are internal as well as external the first thing that we get to know is that when the moment we say customer we think the outsider the one to whom we are giving the product but within a company also there are internal customers customers and the standard refers when it says customer it refers to all interested parties you would believe employees are also customers to the owners so interest all interested parties the shareholders the bankers all are interested parties and they are all customers therefore when the standard talks about customer we have to take it from this point of view that we have to consider all interested parties it could be internal as well as external and quality infrastructure is basically based on customer focus all standards specify that top management has to have a commitment to ensure customer focus customer focus and to implement Quality management system, the top management has to ensure that the quality infrastructure is based on the customer focus.

So, you will see all standards which are talking about quality, they somehow or the other refer to the customer focus, customer requirements, customer satisfaction. Look at any standard, quality standard, they always talk about the customer focus. There is one more important terminology which is PDCA which we say is plan, do, check and act. We will, we have talked it, referred to this PDCA earlier, but we will talk to it and which is basically the basis of continual improvement. The improvement in process, improvement in product, improvement in services, improvement in all parameters, in all operations.

That is how plan, do, check and act, improvement in physical parameters, improvement in financial terms, that is the growth. Wherever you look at, PDCA is implemented and all standards refer to continual improvement. Any standard follows this loop and in fact, if you have a look at your own life, your own lifestyle, if you implement this, plan first and then implement the plan that is do and then check what was planned, how it was implemented, what was the shortfall, what are the possible improvements and analyze it and then identify the actions to again improve the plan and again next time you make a plan and then you make a better plan and then again continue the same cycle.

Every time you proceed with the cycle, you will grow, you will improve, you will change. That is continual improvement. Standards want that you should implement continual improvement, plan, do, check and act in all processes and also in implementing the management system like in a manufacturing process, in a welding process, in a welding process, in an assembly process, you have to implement plan, do, check and act in delivery process, in QC process, every process, you have to implement plan, do, check and act to improve. So, not only this, in the overall management system, in the overall management system, also objectives are planned, objectives are achieved or not and then where did we fall short and then try to again plan next year's objectives and try to achieve.

So, for all operations within the system, one standard says that one should use plan, do, check and act. So, we covered the purpose of standards and also the benefits and also the quality infrastructure and customer, elements of quality infrastructure and customer focus. So, the next agenda topic we move to is basic structure of standards. The word standards itself means that it would be structured. In general, every standard, say if it's a ISO standard, it will have an ISO number, which is a unique number. If it's a British standard, it will have again a unique number.

If it's a Indian standard, by Bureau of Indian standards, so it will again be a unique number. So, there has to be a unique number. Like quality management system, it's a management system certification for medical device manufacturing. So, it is ISO 13481. If it's a plain quality management system, it is ISO 9001. If it is occupational health and safety management system, it is ISO 45001. If it is risk management system, if it is risk management applied to medical devices, it is ISO 14971. So, likewise, it would have a unique number.

It would have edition number and date as to is it the second edition or the third edition. The medical device standard is the edition 3 and it would have a date when it was published 2016. But date also will be mentioned on the standard. So, it would have the release date, the edition number. It would have a title on top of it. It would have a copyright statement that you cannot reproduce the words as it is or you cannot copy contents, etc., etc. A copyright statement.

And then it would have a contents list. I would suggest you can open this standard, the 13485 standard and you would see all these things right from the beginning. On the first page itself, you will see the ISO number, edition number, date, title. And the next page, you will see the copyright statement. And then the next page, you will see what it contains. And then after the contents, it would have an access as to like where applicable, like comparison and cross-reference with other related standards, previous versions, like 2016 is the latest version.

It replaces the previous version. What are the changes? So, these will be referred. Some guidelines would be there. So, an access would be there. Some pictures would be there. So, basically these things and then bibliography is basically the reference to other related standards. I would again say that I would recommend that you can, while taking up this course, parallelly open the standard and have a look at to understand how standards are structured. This is the end of session of the course, standards, certification and accreditation.

Want the rest of Regulatory Process, Standards and Certifications for Medical Devices?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Regulatory Process, Standards and Certifications for Medical Devices course

The remaining 45 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Regulatory Process, Standards and Certifications for Medical Devices course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.