Lesson finished
Unlock all 63 lessons of Introduction and Applications of Hydrologic Engineering Center’s- River Analysis System (HEC-RAS)Full course ₹40,000 · paid
HEC-RAS Hydraulic Capabilities, Energy Equation and Critical Depth
A free lesson from Skill-Lync's Introduction and Applications of Hydrologic Engineering Center’s- River Analysis System (HEC-RAS) course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 3”
What will you learn in this free Introduction and Applications of Hydrologic Engineering Center’s- River Analysis System (HEC-RAS) lesson?
The instructor surveys what HEC-RAS can analyse, including 1D and 2D, steady and unsteady flow, sediment transport and water quality. He then covers steady flow water surface profiles, the energy equation, Manning's friction loss, contraction and expansion losses, and how critical depth is found.
- 1D and 2D, steady and unsteady analysis options
- Steady profiles for reaches, dendritic networks
- Energy equation and Manning's equation for losses
- Critical depth by parabolic then secant method
What comes after lesson 3?
Later in Skill-Lync's Introduction and Applications of Hydrologic Engineering Center’s- River Analysis System (HEC-RAS) course (paid): lesson 4, Week 1 Session 4; lesson 5, Week 1 Help video; lesson 6, Week 2 Session 1. The full course has 63 lessons (27 h 34 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Hello everyone, greetings of the day. So in previous session, we have seen types of hydraulic models and different floods which some states have suffered. So in this session, we are going to see overview of hydraulic capabilities of HECRAS, also the principles of hydraulic analysis, right? So let's start with the overview of hydraulic capabilities. First of all, we need to understand what is exactly hydraulic capability means. hydraulic capability means when we are going to use HECRAS, then what type of hydraulic analysis we can perform with the help of HECRAS. This is what the hydraulic capabilities are. So basically, HECRAS is an integrated system of software designed for interactive use in a multitasking environment. That means we can use this HECRAS software for multitasking environment with interactive use because whenever you are going to use any type of software, then it's graphics, it's graphics, it's interaction with the user is very important. That means whenever you are going to use the software, how it will look like and whether it is user friendly or not. So that part is very important. Whenever any software we are going to use or any developer is going to develop any new software, right?
So let's talk about overview of hydraulic capabilities of HECRAS. So HECRAS is capable of performing one dimensional analysis, two dimensional analysis, steady flow analysis, unsteady flow analysis, then steady wind transport or mobile bed computation and water temperature. Let's talk about in details, its capabilities in details. So before that, I would like to give you some basic or brief idea. One dimensional analysis that means the flow will be considered only in one direction. Two dimensional analysis means flow will be considered in two direction, that is in channel and in fluid plane, both directions will be considered or you can say both dimensions will be considered.
Then steady flow analysis is the type of flow and we are going to use this type of flow for analysis. So we are going to call this as a steady flow analysis. Then unsteady flow analysis, that means the flow parameters will change with respect to time, right? This is the definition of unsteady flow and we have seen this definition in previous session. So when we are going to use unsteady flow means what? See, whenever we are going to deal with any natural open channel, that is river, let's talk about river.
It is not possible to flow river without sediments, right? So the size of sediments and types of sediments, depending on the sediment, we need to perform the river analysis with the help of HECRAs. Then this one is the hydraulic capability of HECRAs also. That means we can perform sediment transport analysis also and mobile bed computations and water temperature. Yes. Now see, if we are going to talk about environment, then whenever environment term will come under civil engineering or any stream, the quality of water is very important.
So this water temperature is related with quality of water. So this is also one of the hydraulic capability of HECRAs, we can say. So these are the hydraulic capabilities of HECRAs. So let's talk about steady flow water surface profiling. So basically, this component of the modeling system is intended for calculating water surface profile for steady gradually varied flow. See, subtype of steady flow is here, that is steady gradually varied flow. So the system can handle single river reach, then dendritic system or full network of channels.
See, what these three things are or what these three systems are. First is single river reach. That means a single river we can use. Suppose this is what your river is and maybe this will be your catchment. Let's talk about this, what your catchment is, okay. And your river is flowing like this, in this direction. So if you are going to perform an analysis of river for this single river, then we can call that as a single river reach, okay. So this is how this software can handle this system.
The next is dendritic system. That means, let's talk about a substream. Suppose this one is a river, which is going to confluence at this location, right. At this location, this river will confluence. So this type of network will be also handled by HECRAs. That means we can join number of streams to our major stream and we can perform the hydraulic analysis. And full network of channels, that means number of channels are there. Like this one is a stream, this one is another stream, this one is another stream.
Likewise, we can perform this type of analysis also. These are the capabilities of hydraulic analysis for steady flow water surface profiling, right. Steady flow water surface profiling, this system can handle single river reach, dendritic system and full network of channels. Next is the steady flow component is capable of modeling subcritical, supercritical and mixed flow region water surface profiles also. See, at the end of the hydraulic analysis, we are going to compute the model, right. At the time of computation, we will see three options for computation.
The first option will be subcritical. Then second will be supercritical. And last will be mixed flow region water surface. So, these are the different options we have for steady flow water surface profiling. Next, steady flow analysis includes multiple plan analysis, multiple profile calculations, bridge and or culvert opening analysis and split flow at stream junctions. Now, let's talk about these things one by one, okay. So, first is multiple plan analysis. That means we can perform this analysis for multiple plans, plan one, plan two, plan three. Depending on number of reverse, we are going to perform in a single system.
So, this is what the multiple plan analysis is. Next is multiple profile calculations. Now, let's talk about 100 year flood, 15 year return flood and 25 year return flood. Or number of, it may be 5, 10, 15, 20, depending on the discharges available with you. So, let's talk about a single river. Suppose this is what your river is, okay. So, you want to perform analysis of this river for number of profiles. That means first profile will be for your 25 year. Second will be for your 50 year.
Third will be for your 75 years. Fourth will be 100 years. So, we just need to create a river system. That means you can say we just need to create a river and cross-section geometry for a single time. And we can perform that single river for number of times of calculations for computations. That means for 25 years, suppose 100 meter cube or you can say 100 cumec is the discharge. For 50 years, it may be 200. For 75 years, it may be 400. And for 100 year, it may be 1000 meter cube per second, right.
That is cumecs. So, we can perform that single river's geometry for a number of profiles. And we can get the results as per our requirements of profile. So, this is what the second steady flow analysis is. Next is bridge and or culvert opening analysis. Yes. Whenever we are going to talk about river, definitely there will be a bridges, there will be a culverts. And we need to perform the opening analysis for these type of structures. That means how much opening we have to keep at the time of design of bridge or at the time of design of culvert.
So, that things will be performed with the help of this analysis or we can calculate that openings or we can do the analysis of that openings for the bridge or culvert with the help of steady flow analysis. So, this is what the third and next is split flow at stream junction. Yes. Now, let's talk about this river. Suppose this is what your river is. One stream is going to confluence at this location. Okay. Another stream is confluencing at this location. Yes. Have you know that? What is catchment areas, right?
So, if you are going to talk about this junction, suppose this will be the catchment area for this junction. If you are going to talk about this, then this will be the catchment area for this junction, right? Suppose this is what your catchment area number one. This is your catchment area number two. Now, let's talk about what this split flow at stream junction is. Maybe one major village is located at this location and second major village is located at this location now. Now, you know, this catchment area one, whatever the discharge, whatever the flow, we are going to calculate, that will be flow through this stream and this major river, right?
And that will reach this location. And suppose this one is your Q1. Let's talk about discharge. Disharge we are normally noted by Q. So, Q1. And for this catchment, the discharge will be Q2, right? So, this will be your Q2. So, at this location, the discharge will be Q1. And when this Q1 will try to enter in this reach, this Q1 will become Q1 plus Q2, right? So, at this location, the discharge will be Q2. Total discharge will be addition of Q1 and Q2, Q1 and Q2. Why I am talking about these things? I will explain you these all things in next sessions because this is also we are going to see that how to calculate the discharge for respective catchment areas and how to enter that data requirement as per challenges, right?
So this is what the Q1 plus Q2 is. Now, this Q1 will going to enter in this village and then how much area will be submerged that will be calculated with the help of this Q1 or with the help of this HECRA software. So this split flow at stream junction that means we can split flow as per junctions as per our requirement and we can see how much area will be flooded, how much area will be submerged because of that splitted flow. So this is the next capability of this steady flow analysis. So this is how this steady flow analysis works. Now, next, we are going to talk about unsteady flow simulation.
So this model link system is capable of simulating one dimensional unsteady flow. Yes, then two dimensional unsteady flow, then combine 1D and 2D unsteady flow. Now, see why I am talking about this full network of open channel, that means we can perform hydraulic analysis for a river for full network, that means maybe you can say hundreds of number of streams are going to concluence your major river. So we can perform hydraulic analysis for all that hundreds of small streams also. So you can say for different floodplains also or for alluel fans also.
Then the unsteady flow component can be used to perform subcritical, supercritical and mixed flow regions depends. Okay, so let's talk about unsteady flow. Most of the times if there will be a channel drop or you can say if there will be a canal fall or hydraulic jump. So, and in that locations there we need to go for unsteady flow simulation or simply you can say if your water is flowing through river and you are going to construct any bridge or culvert across the river. Then at that location, afflux will be formed and that because of afflux, steady flow will be converted to unsteady flow. Right.
So this type of hydraulic analysis we can perform with the help of this HECRAS software. So the hydraulic calculations for cross sections, bridges, culverts and other hydraulic structures that were developed for steady flow component were incorporated into the unsteady flow model. That means see, whatever we have created a reverse structure for that steady flow analysis, we can simply use all that data for unsteady flow analysis. We just need to enter the different type of flows in unsteady flow. That means if we will see now in coming sessions, I am going to explain what that steady flow analysis is and how to enter flow data for that steady flow analysis.
So there is only one small difference between steady and unsteady flow analysis. We just need to enter different type of flows. Right. Different types of characteristics of flows and the characteristics of your geometric channels. So that we just need to enter. So basically the bridge data, culvert data, cross section data of the river, which we have used for steady analysis, we can simply perform the same river analysis for unsteady flow also. Right. So this is what your unsteady flow capability of HECRAS is. So basic to summarize these unsteady flow analysis, we can perform unsteady flow simulation for one dimensional, two dimensional and combine 1D and 2D flow, unsteady flow.
So this is all about unsteady flow. Now let's talk about additional capabilities of HECRAS. So in that additional one, first is sediment transport or movable boundary computations. Now see, HECRAS, this component of the modeling system is intended for the simulation of one dimensional sediment transport or movable boundary calculations resulting from scour and deposition over moderate to long time periods. Now see, as I have mentioned earlier, just look at this river. Suppose this is what your river is, your river is flowing like this and when this river is trying to flow, it will carry some type of sediment, sediment particles or some type of debris with it.
So maybe if the river slope is very less, that particles will unable to flow with the velocity of water. So that will be going to deposit in some areas. You can say maybe at this location, that deposition will be there or you can say at this location, there will be a deposition. So we can perform this type of deposition also. That means HECRAS can perform sediment transport analysis also. That means how much sediment can be transport or can be carried with the help of this HECRAS software.
Sorry, with the help of that water. So this is also another capability of your HECRAS is the sediment transport potential is computed by grain size fraction. As I have mentioned, depending on grains and debris. So depending on the size, the computation will be performed. It allowing the simulation of hydraulic sorting and armoring. So major feature includes the ability to model a full network of streams, channeled regime, various leave and encouragement alternatives and the use of several different equations for the computation of sediment transport. That means, yes, as I have mentioned earlier that when we are going to use HECRAS, definitely there will be some algorithm which the developer have used.
So in that algorithm, different type of equations they have used, which we have studied in classes or colleges. So that equations are going to use for computation and we will get a better results or the correct results with the help of this software. The next capability is water quality analysis. Yes. Now, yes, whenever we are going to talk about environment, the water quality is very important. So in that water quality analysis, HECRAS can perform or you can see this component of the modeling system is intended to allow the user to perform reverend water quality analysis.
Yes, water quality analysis. So this version can perform detailed temperature analysis and transport of a limited number of water quality constituents. As we know that there are number of constituents of water quality like algae, DOs, that is dissolved oxygens or carbonaceous biological or COD-BOD or dissolved orthophosphate. So number of constituents are there, but when we are going to use HECRAS, there are some limitations of HECRAS that we can perform water quality analysis for limited constituents, right, for limited number of water quality constituents. So these are the hydraulic capabilities of HECRAS, so we can say in additional capabilities, sediment transport or movable boundary computations or water quality analysis.
These are the hydraulic capabilities of HECRAS are and for steady flow and unsteady flow also, right. So steady flow, unsteady flow and sediment transport and water quality. So these are the additional capabilities of your HECRAS are. So principles of hydraulic analysis. So whenever we are going for any type of analysis, we must have to follow some principles, right. So for hydraulic analysis also, we have to follow some principles. At the time of development of the software, the developer has used different types of principles, which are the standards or which we are followed for hydraulic analysis.
So in this session, we are going to talk about the different principles of hydraulic analysis. So principles of hydraulic analysis. So these are the basic or the important principles of hydraulic analysis, which are used for HECRAS. So first is conservation of energy. Second is conservation of momentum. Third is Bernoulli's equation. And fourth is energy losses. So conservation of energy, conservation of momentum. Now, these all parts are already covered in your colleges. So my main focus is on Bernoulli's equation and energy losses because the results which we are getting from HECRAS will be depends on these Bernoulli's equation and energy losses.
So let's talk about principles of hydraulic analysis. So before that, let's talk about steady flow analysis. Now, what type of things will be used for steady flow analysis? That part we are going to see in this part. So when we are going for steady flow analysis, the basic computational procedure will be the one-dimensional energy equation. That means at the time of steady flow analysis, a basic computational equation used is one-dimensional energy equation. That means the algorithm which was prepared by developer is totally based on one-dimensional energy equation for steady flow analysis.
Next is energy losses are evaluated by friction. Yes, now when we are going to talk about open channel or river analysis, energy losses or the friction loss is calculated with the help of Manning's equation. As worldwide, we know that Manning's equation is V is equals to 1 upon N, R raised to 2 by 3, S raised to half. So here N is the Manning's equation. coefficient or you can say Manning's constant which we need to use for our purpose also that means whichever river we are going to perform we need to see the Manning's constant or the n value for that respective river depending on the nature of that river we are going to use that Manning's equation or Manning's constant and the total friction loss for that river will be calculated with that algorithm and we will get directly results.
Next is contraction or expansion change in velocity here yes see now what is contraction or what is expansion let's talk about this in the river I am talking about river suppose this is what your river is river is flowing like this okay and maybe due to some river encroachment or you can say due to some river enlargement there will be contraction in the river or there will be expansion in river okay so now let's talk about this area about this area about this area and this area okay sorry this cross section and this cross section so this is what your cross section number 11 is and this is your cross section 22 is so if you will see at this location the width of river is less as compared to second cross section right so we can say at this location there will be a contraction of river and at this location there will be expansion of river and when there will be a change in area and when there will be a change in area definitely there will be a change in pressure here and velocity here definitely we can say due to contraction or expansion there will be a change in velocity here so this is what the next steady flow analysis equation we are going to use the next is rapidly varied surface profile so if there will be a rapidly varied surface profile we need to go then the equation used will be momentum equation that means the algorithm used for that computation is momentum equation so normally this type of surface profile will happen or occur if there will be a hydraulic jump or at bridges if you are going to construct a bridge there will be a change in surface profile that will convert it into rapidly varied surface profile or at some river confluences or different junctions so rapidly varied surface profile we can use or we have to use momentum equation next next let's talk about bernod's equation so here is the energy equation that is bernod's equation right so basic profile equation or the basic profile calculations are performed with the help of energy equation so on right side you can see the image here you can see this black line is your channel bottom right here you can see this is what your water surface is and this will be your energy gradient line now in colleges you can see this is what your energy gradient line is so let's see what that modified bernod's equation is so here z2 plus y2 plus y2 plus here a2 is a constant or coefficient you can say a2 or alpha depending on your concept so z2 plus y2 plus a2v2 square upon 2g is equals to z1 plus y1 plus a1v1 square upon 2g plus hl hl is the head loss or here energy head loss see here you can see here you can see here you can see here you can see this is what your z2 is this is your z2 this is your y2 this is your y2 and this is your v2 square upon 2g that means if you are going to add the basic equation is energy is constant for all the sections only there will be a change in different heats here you can see y2 is your pressure head or water depth itself is your pressure head this v2 square upon 2g this is your velocity head z2 is datum now when water is trying to flow from this cross section 2 2 to cross section 1 1 now i am calling or i am nominating this 2 as a cross section 2 and this 1 as a cross section 1 so when water is flowing from one location to another location there will be some head loss right so if you are going to add that head loss in second cross section then your energy will be equals right your energy will be constant so here z1 and z2 is equal to datum levels y1 and y2 are the water surface elevations at different cross sections or respect to cross sections then a1 a2 these are the velocity weighing coefficients then v1 v2s are average velocities g is the acceleration due to gravity and hl is the energy head loss now we will see what exactly that head loss is and how to calculate that head loss just remember this equation because the output or the results we are going to get from the head cross will be depending on these heads only ok so just remember all these heads that is velocity head pressure head and different head loss ok so let's go for energy equation so now see or now we are going to see when this energy equation will be applicable and when momentum equation will be applicable so energy equation only applicable to gradually varied flow situations see if there will be a gradually varied flow situation then and then only we can go for energy equation that means for rapidly varied flow situations this equation is not applicable or this equation will not give us the accurate results then not applicable for water profiles which passes through critical depth yes if your water surface if your water surface will passes through critical depth then also this equation will be not applicable so basically energy equation is applicable to gradually varied flow situations only so in some situations transition from sub critical to super critical flow and vice versa can occur so this situation can happen in channel slope in bridge constrictions in drop structures and vias and stream junctions that means so at this transition from this transition from this transition from this transition from this transition from sub critical to super critical flow or vice versa will occur if water or the river will be flowing through or if there will be some changes or the drastic change in channel slope or there will be a bridge constrictions or some type of drop structures we need to construct due to some slope limitations or due to controlling the flow of water or maybe some types of where we are going to construct or at the stream junctions so at this type of locations there will be a transition in flow that is from sub critical to sub critical so at such situations it is necessary to apply the momentum equation so we don't need to apply momentum equation or energy equation from our side okay so that all things will be applicable with the algorithm they have created in software itself so we don't need to check whether there will be a super critical flow or sub critical flow so all things will be directly applicable as per algorithm that will be directly used by software itself so loss in energy here so in plan view you can see the reach that is let's talk about this one so this is what your reach one is this is you can say it is reach two so from reach one to reach two the lc shows a length of channel from reach one to reach two l o b l of l o b shows length of left over bank and this l r o b shows length of right over bank that means these lengths are for your floodplains that is for l l o b or l r o b and the center is shows for your main channel as we have seen in types of hydraulic analysis or you can say four dimensions that 1 d 2 d in that we will talk about channel and floodplain so here you can see this lc shows length of channel here this shows length of left over bank that this is length for floodplain and this is also for floodplain these lengths are from one cross section to another cross section because when we are going to talk about river we need to go for some type of survey field survey and depending on the use of that river or the importance of river this cross section interval will be varied we will get that data from site or from field survey we are going to create different cross sections and we are going to enter that data in hikra software so let's talk about that head loss hl which we have seen last slide that is in at the time of bernoulli's equation so here hl hl is equals to l sf plus c a2 v2 square upon 2g minus a1 v1 square upon 2g now here this l l means what l is equal to length of left over bank into discharge of left over bank plus length of right over bank into discharge of left over bank whole divided by discharge from left over bank plus discharge of channel plus discharge of right over bank So this is what this L is. So SF is slope of energy gradient. Then Q is the discharge. So this is what about your LOB. Now here in this image you can see the cross section. Here this was cross section 1, cross section 2 and this image shows one cross sectional view.
Yes here you can see this LOB that is this velocity head is for LOB that is left over back. This velocity head is for ROB that is right over back and this is what the center is. Now here you can see this red dotted line is velocity head of your left over back floodplain. Then here this dotted line shows velocity head for right over back and the center one. Here you can see the velocity head is more. Because you know that roughness coefficient for channel will be very different.
As compared to floodplains, because if you are going to see the floodplain, you can see different types of grasses and the different types of rocks or the sedimentation is happen or there will be a lot of deposition of these type of things will happen on in floodplain as compared to your main channel. So, velocity head at channel is more as compared to left overback and right overback. So, here this c, small c is contraction or expansion coefficient. As I have mentioned in the earlier that if there will be a contraction or expansion, we need to or the, there are some standard values or there are some standard coefficient which we have to use for Hicka's analysis.
So, here you can see the contraction occurs when downstream velocity head is higher than upstream velocity and vice versa. Yes, see, contraction occurs when downstream velocity head is higher. As I have mentioned in previous slide that if area will be reduced, velocity will be increased and pressure head will be reduced. So, here also they have mentioned that if contraction occur when downstream velocity head is higher, that means if there will be a contraction in area and downstream side, there will be a velocity head which will be more as compared to downstream head and at upstream side, pressure will be more as compared to downstream side.
So, this is what they have mentioned here. Then here L is the reach length along the flow. This L, L is the reach length. Then S is the slope of energy gradient. Then Q is the discharge or flow. L OB is the left overback. CH is the channel and ROB is the right overback. So, this is all about loss in energy head. Okay. Let's talk about critical depth. Now, when this will be occur. So, depth at the which the energy is minimum for a given flow.
That means we can say when supercritical will be converted to subcritical or subcritical is converted to supercritical. This type of depth will be occur. Right. So, we can say depth at which the energy is minimum for that given flow. So, this is what your critical depth is. So, in Hekra's critical depth has been obtained in two conditions. First condition is when there is less than 0.003 meter change in water depth from one iteration to the next iteration. Now, you can say change in water depth between two successive iteration is less than 0.003 meter. And there is another condition. The energy head has not either decreased or increased by more than 0.003 meter.
That means change in head is less than 0.003 meter. So, if this condition will be occur. Then we can say water is flowing through that critical depth condition. So, the program has two methods for calculating critical depth. That means when Hekra's will going to calculate the critical depth, it have two different methods. First is parabolic method and second is secant method. So, if the parabolic method is tried and it does not capable, then the program will switch to the secant method. That means we don't need to do anything. The software or the algorithm will automatically switch to the another method if the previous one is not applicable.
So, this is applicable for all the calculations or all the computations. Okay. So, in this session, we have completed overall capabilities of Hekra's and the basic principles of hydraulics which are going to be used in the algorithm of Hekra's or at the time of computation of Hekra's. So, this is what we have completed for this session. In next session, we are going to see the limitations of steady flow analysis when we are going to use Hekra's and hands-on training that how to install the software, how to download the software and some basic challenges for this first week. Okay.