Free · 3 lessons · no paymentHVAC Systems Flow Analysis using Converge: 3 free lessons
Free lessons from Skill-Lync's HVAC Systems Flow Analysis using CONVERGE course. The first two are setup lessons: the welcome email, licence activation and one-time Cygwin commands, then creating run directories and launching CONVERGE cases in parallel from Cygwin. The third tours CONVERGE Studio and sets up a simple channel-flow geometry with inlet and outlet boundaries.
Last updated 16 Nov 2026 · 3 free lessons (1 h 7 min) · full course: 40 lessons (12 h 14 min), paid · ₹40,000
Free lesson 1 · 25 minGetting Started: Welcome Email, Licence Activation and Cygwin SetupWhat will you learn in the free HVAC Systems Flow Analysis using Converge lessons?
- What to set up before a CONVERGE course: licence, VPN and Cygwin
- Navigating with pwd, cd and ls and organising case folders
- Running CONVERGE in parallel and choosing the MPI executable
- The CONVERGE Studio interface and boundary assignment for a channel flow
Free lessons you can watch now
Lesson 1 · 25 minGetting Started: Welcome Email, Licence Activation and Cygwin SetupThis is an administrative lesson on what to do before starting a CONVERGE course. The instructor shows the welcome email with its software download links, licence request sheet and orientation details, explains the server based licence and VPN connection, and demonstrates one time Cygwin commands run as administrator.
Lesson 2 · 25 minSetting Up Run Directories and Running CONVERGE Cases from CygwinThe instructor shows how to launch Cygwin as administrator, use pwd, cd and ls to navigate, and create a CONVERGE runs folder outside the C drive with a subfolder for the channel flow case. It also explains the processor count in the run command for parallel processing and which MPI executable to use.
Lesson 3 · 17 minCONVERGE Studio Interface and Channel Flow Geometry and Boundary SetupThe instructor tours the CONVERGE Studio interface, with geometry tools on the left, the 3D view in the centre, case setup on the right and a log window below. A simple box channel is created, its faces are assigned to inlet and outlet boundaries, the geometry is checked with the diagnosis tool, and pressure boundary conditions are set.
Which lessons of HVAC Systems Flow Analysis using Converge are free?
The first 3 lessons are free on Grow by Skill-Lync: 1 h 7 min of video from Skill-Lync's HVAC Systems Flow Analysis using Converge course that you can watch here at no cost: leave your name and phone number once and they play (as of 16 Nov 2026). The full course is paid (₹40,000); its other 37 lessons are listed in the outline below so you can see what each one covers.
How long is the HVAC Systems Flow Analysis using Converge course?
The full course has 40 lessons and 12 h 14 min of recorded video, plus the projects and assignments that come with enrolment. The free lessons alone take about 1 h 7 min, so you can finish them in an evening and decide whether to continue.
What comes after the free lessons?
Lesson 4 onwards is in the paid HVAC Systems Flow Analysis using Converge course on Skill-Lync, with mentor support and a certificate. For a career in CFD, the Post Graduate Program in Computational Fluid Dynamics goes further with industry projects and placement support.