Lesson finished
Unlock all 34 lessons of Electronics System DesignFull course ₹40,000 · paid
System Design Inputs and Electronics Applications Across Industries
A free lesson from Skill-Lync's Electronics System Design course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Module 1 Session 3”
What will you learn in this free Electronics System Design lesson?
Covers the inputs to system design, including user, business and regulatory needs, and translating them into technical details using a smartwatch example. Explains why medical devices face extra regulation, then surveys electronics fields such as system on chip, instrumentation and optoelectronics, and applications in cars, IoT and consumer devices.
- Turning user needs into technical requirements, such as IP67
- Why regulation sets medical devices apart
- Multidisciplinary inputs: electronics, software and enclosure
- Applications in automotive, IoT and consumer electronics
What comes after lesson 3?
Later in Skill-Lync's Electronics System Design course (paid): lesson 4, Module 1 Session 4; lesson 5, Module 2 Session 1; lesson 6, Module 2 Session 2. The full course has 34 lessons (10 h 43 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Welcome back to electronic system design and this is going to be module 3 where we will be talking about applications and examples for a few of systems in various industries where electronic systems are a part of. So the first thing that needs to be, that should be kept in mind when you are designing an application or a system is to understand the need or application. So the intended use or application is the basis for any design and the user needs, there could be many other inputs as well like user needs, business needs, regulatory needs and compliance requirements and all those.
So all those requirements have to be considered when an application is developed or rather when a system design is approached basically. And realizing those needs need need these business needs or user needs to be translated into technical detail. That is a challenge which a system designer has to take up and as a part of this activity. So every need, like for example, the user will say he will just need a smartwatch to measure heart rate and what kind of a sensor has to be used when he says heart rate and what kind of a signal has to be received or captured.
So he will have not have any idea because it's basically not technical. So, so out of the user needs, technical details have to be derived. For example, the watch has to be IP67 rated. So for IP67, to achieve IP67 rating and mechanical, your outer housing has to design has to be in a very, in a very different way. So to achieve those, what technical details have to be needed. So those have to be captured. Similarly, regulatory needs and this is very important for a medical device because the only differentiating factor between a consumer electronics or any other industrial product with a medical device is the regulatory.
Medical devices directly impact the lives of people who use them. So there are a lot of regulations and when it comes to qualification of a medical device or when it comes to qualification of a system or an appliance as a medical device, a simple smartwatch will cost less because it won't, it doesn't need to pass those regulatory requirements. Whereas if you want to qualify the smartwatch as a medical device, so you need to have approvals from the respective regulatory bodies. So that is one key challenge for a medical device design and realizing those into technical details like I have discussed.
So is another challenge and inputs are actually multidisciplinary and it's a multidisciplinary that the inputs have to be from different design aspects. Your system is not complete or a product is not complete just with electronics in it. So there is software, there is a mechanical enclosure into which this product goes. There is a software and a firmware and user interface application running in the background. So all those things they constitute a system. So inputs from multidisciplinary teams. So those are also needed. In this example, you will see that there is an electronic system in the center.
But this design is an outcome of various requirements. For example, user needs our application. So user wants to read his heart rate. So there is a sensor interface. There is a sensor which will pick up those signals from your pulses or your heartbeat. And there is some electronics which will convert those analog signals into digital circuitry and all those things. Similarly, there are business needs. So there should be regular updates or there should be a newer version of this product after one year. So you limit the number of use cases that are possible with this or anything of that sort.
And there are regulatory requirements. So this device, if it has to be used in the US as a medical device or in the European Union or European countries, then the respective country regulatory bodies have to approve them. For example, FDA is a regulatory body for North American market. So if this device has to be qualified as a medical device and it has to be used in a hospital environment. So this needs to be qualified by FDA as a medical device. And for it to qualify, there are certain norms like this has to be EMIMC compliant and it has to pass IEC 60601 safety standards.
So all those testings have to be performed on this system and the results have to be positive. Meaning they should be proven to be compliant to all those standards in order to get a nod from regulatory. These regulatory bodies, they are different for each country. So FDA is for North America, then European Union is for the European countries. And Japan has their own regulatory body and India has their own regulatory body. So they're different for different countries. There are some international standards which are acceptable. Like for example, IC 60601, though it is European standard, it is acceptable in India or in India also.
But for FDA, there are different standards. For example, FDA 21 CFR chapters, respective chapters talk about EMIMC compliance, the safety compliance and all those things. So you have to qualify them both for European countries and FDA. You have to get their approval and then only you will be eligible to sell it as a medical device in those countries. So this is very important for a medical in medical industry. And then there are risk control. So also, this is one important differentiation factor between a commercial electronic product and a medical product.
Risk controls when you're designing a system. So you will have to perform a risk analysis. You have to identify what are the risks that are associated with each test case or any event. And that's an entire process and we will be covering it in the further chapters. But just to give an understanding. So risk analysis will tell us like what is the impact or how much of a harm can happen to a patient or the end user. In case the system's intended functionality is not met.
For example, if the smartwatch stops and stops recording heartbeat. And if there is no indication to the user or the hospital network, then something happens to the patient that is never recorded. And because it is not giving any indication that the heart rate measurement has failed. So there won't be any alert also. And that can lead to some consequences. So the risk of failure in a hospital environment has to be identified. And a mitigation or a control measure has to be designed. So that this risk, the impact of the risk can be brought down.
So that is one important need. Then quality control. Quality control is basically, it is internal to a company. But your regulatory also medical device regulatory wants to have a quality control or a quality precision in place. And this is in house. But it has to be in compliance to ISO 63284. So it is an acceptable quality procedure. And all the companies have to have their own policies. And this policy is basically to tells you how to approach a design, how to capture the user needs, how to do a qualification and all those things.
Now coming to the branches of electronic system. Electronic system are divided into various branches or types. There is semiconductor technology, basically VLSI, where all the applications or different applications are embedded onto one IC. We call it system on chip. And this, most of the times, semiconductor or an SOC is designed to achieve one specific purpose. So the more recent times, most of the smartwatches that we see, the Qualcomm ICs that come, they are SOCs. Meaning there is a microcontroller. In addition to that, there is some definite or defined or fixed memory and some interfaces.
Which are common for all smartwatches. Qualcomm designs or decides to design one such system on chip, which can be used in a smartwatch. So that is called an SOC. It's called a system on chip. And then there is instrumentation, which is basically used for measurement like a multimeter or oscilloscope and all those devices. Then optoelectronics, your optical fiber networks or anything where optics is needed. Like a camera or digital camera or any such application. Then flexible electronics. Flexible electronics is like flexible electronics. An application of flexible electronics is wearable electronics.
So when you design a PCB. PCB is of different types. Rigid PCB, flexible PCB or rigid flex PCB. So flex PCB by definition is bendable. So you can, it's not rigid. So the components that are assembled on them will still be there. But the PCB as a whole, it can be shaped or reformed. So those kind of application are called a flexible electronics. And this is mainly used in wearable technologies or many medical applications. Of which we will understand the subsequent chapters. When you're building an electronic system application.
So there are a few basic building blocks. For example, again the intended use. In the application to move on to the command. For example, a mobile application is called a mobile app. This is a mobile app. It's basically a unique device. So it's a mobile application. So it's a mobile app. So it's a mobile tool. So with the option of this, a mobile app. It's a mobile device. The very basic criteria and then electronic system has to be industry specific meaning if you're targeting a medical device then all the regulatory and all the other compliance requirements specific to medical device have to be considered.
If you're designing an electronic system for a military use then all the compliance and other requirements for military purposes or which are defined for military use have to be taken into consideration and reliability is one very important factor in medical electronics because this is reliability basically is to make sure that the system doesn't break meaning you have designed a system which has to and you say that the system will work for one year. So within that one year the system should not malfunction or the system should give a consistent output. Now there can be situations where a system there can be some software bugs because of it the system usage is not as intended but it can be fixed but reliability is to make sure that the system's functionality is met every time.
For example if you have a patient monitoring system if you have a patient monitoring system if you plug in and its purpose is basically to record a heartbeat on day one and even on day 365 the system should be able to record a heartbeat. So that is reliability. So that is reliability. So reliability analysis will be performed to make sure that the system's performance will not deteriorate over time. Targeted users are something related to industry specific only because industry specific and also depends on the application.
So for example a smartwatch again can be used by a user for regular purposes. So and also it can be used by a hospital network for diagnostic purposes. So the same device can have two different target users but the difference is the compliance. So a commercial electronic normal person uses for his in his day to day life. It can just be a consumer electronic part and it need not go through the qualifications for a medical device. Whereas the device that the hospital is going to use in their network. It has to be qualified as a medical device. So the target users change to the industry changes and qualification and all those things also changes also target countries. So this is also related to compliance because if you're targeting to launch the product in various countries then you have to have get those country approvals accordingly.
One example that I can state is Samsung Galaxy Watches which have recently launched. They are capable. They have the hardware and the software capable of performing ECG in all other countries except South Korea. They cannot use this ECG functionality. Reason they were not able to qualify their device as a medical device in all other countries. Whereas they have got regulatory approval only in South Korea. So in South Korea. So in South Korea they will be able to use this ECG application. So targeting countries you have to design your system, your hardware, software, everything based on your target countries as well. Similarly there are various application domains. So this is a continuation to the topic industry specific which we discussed.
And these are the various industries that electronic systems can be designed for use. A military domain and basically for military and defense purposes. Medical industry for patient monitoring, for diagnostics, treatment and all those purposes. Automata industry where like our ECU's electronic control units and various other electronics modules. IOTs like home automation and for robotics like control systems basically to control motor movement and to gather inputs from sensors and consumer electronics like televisions, laptops and all those things. I will also walk us through a few examples pertaining to each industry. So in this image what you are seeing is a weapon mount system. So this is an electronic system and it's basically a video processing system. So there are different kinds of weapon mount inside systems. So some will only help you with zoom basically to see better like reach far distances. But there are other types of human distance. But there are other types of inside systems like thermal imaging infrared which will enable the user to see people at night. So this is one such application where the feed is a live feed that is happening live and there will be some video processing happening inside and what the user sees is a thermal or an infrared image of the live.
So there is an electronic system inside this based on a digital signal processor or any capable processor or an FPGA. So they collect video signals from the camera that is mounted on the front side and the processed video will be displayed through a small screen to the end user. And then there are radar systems. Basically radar is an application where electronic signals are transmitted and the same signals are received back and the time taken between the signal transmission and reception tells you how far the object is. So this is one of the radar applications. Nowadays these are coming to cars and various types of automobile applications as well. But the electronics involved here is a control system basically and an RF application.
So there is a radio frequency signal that is generated periodically and once the signal is transmitted through antennas it will go hit the object and then it will come back. So the receiving signal the intensity of the receiving signal will be less than the transmitting and the signal that is transmitted. So the antenna sensitivity has to be good enough to receive those signals as well and the received signal if it is the strength is not enough for further processing it needs amplification and there is also some electronics intelligence which will measure the time taken between the transmission and the reception back.
So an electronic system is responsible for all those activities. Similarly there are navigation systems and the navigation system is basically an app. We have our GPS nowadays. So GPS is basically a device which will communicate to communicate with the satellites and they will try to get the position in terms of longitude and latitude which keeps changing real time. If based on the moment and direction. Again this is an RF application. So we are in similar to radar. So signals will be transmitted and they received back.
Ok. And again in MIL-3 there can be control and communication systems also. And so their purpose is basically to establish communication with various modalities like satellite communication or different modules. And there are also control systems which will try to control which will have control over these communication systems. For example a radar module that you are seeing here. It has a control system inside this which will control the frequency, intensity of the frequency, the time period and all those things. So this is an application. And coming to automotive domain. So one application of electronic systems is an ECU electronic control unit. So this communicates with various other modules within the automobile through CAN network and it will try to collect that data for various purposes like for diagnostics or control or different purposes. So this is one application of electronic system. Automotive domain. There are again entertainment systems.
So in this image you can see that there is a display unit and there is some electronic system embedded behind this module. And that is responsible basically for various entertainment purposes or to help the user to control the environment within the car or to achieve different purposes. Passenger safety and comfort. So we all know that airbags get deployed when they are in the event of an accident. So So all those activities or actions are controlled by an electronic system. So there will be sensors and impact sensors which will analyze the impact in the event of an accident. And if the impact is high enough, so they will deploy airbags through a chemical reaction. And all those activities are monitored and controlled by an electronic system.
So coming to IoT and consumer electronics domain. So all the cell phones, the mobile phones, tablets that we see today are electronic systems and in the consumer electronics domain. And for IoT there are home automation systems and which will allow the user to unlock the door with just by using his mobile phone. So there are many advancements. So there are many advancements in IoT. So those are again electronic systems. And a few more examples are our laptops and computers that we see in our day to day life.
캐릭ounds Av'o Uw From W Voy Medal Um eastern een Tak Long Also electronic systems and home automation system which is an electronic system used in IoT domain and so this will conclude our current session and I will continue with the next session. Thank you.