← Previous lessonFree lesson 3 of 3 · lesson 3 of 90

Unlock all 90 lessons of Developing IoT ApplicationsFull course ₹40,000 · paid

Price & syllabus
Free lesson · 11 min · no payment

IoT Architecture: Layers, Building Blocks and Upcoming Technologies

A free lesson from Skill-Lync's Developing IoT Applications course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 3”

What will you learn in this free Developing IoT Applications lesson?

Explains the layers of an IoT application, from sensors and actuators through the gateway, communication, cloud and user interface. Traces the end-to-end data and control workflow, then lists current and upcoming hardware, software and connectivity technologies such as digital twins and Wi-Fi 6.

  • Device, gateway, communication, cloud and user interface layers
  • Core, analytics and cognitive cloud platforms
  • End-to-end workflow from sensor to actuator command
  • Emerging hardware, software and connectivity technologies

What comes after lesson 3?

Later in Skill-Lync's Developing IoT Applications course (paid): lesson 4, Week 1 Session 4; lesson 5, Week 1 Session 5; lesson 6, Week 1 Session 6. The full course has 90 lessons (20 h 42 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Now, in this third section, we would see the fundamental building blocks of IoT. Any IoT applications could be divided into five layers. Device Layer, Gateway Layer, Communication Layer, Communication Protocol Layer, Cloud Layer, and User Interface Layer. The Device Layer consists of Sensors and Actuators. Sensors are input devices to read some property of the thing, while actuators are output devices that are used to control some applications. The Gateway Layer consists of some microcontroller with general purpose input-output pins to connect with Sensors and Actuators and read data from Sensors and write data to Actuators.

It collects the data and stores it temporarily before it is transferred to Cloud or Internet. Communication Protocol Layer consists of communication modules that could be built-in inside microcontroller or external modules. There are two types of communications. Device to Gateway which is wired communication or low-level wireless communication which is essentially at very low distance from devices which are sensors or actuators to Gateway. Gateway. Gateway to Cloud is Internet communication over either Ethernet or Wi-Fi or cellular. Next is the Cloud Layer. It consists of the solution that will be the Core IoT Platform, Analytic Platform, and Cognitive Platform.

Core IoT Platform has basic functionalities like storage, support for communication protocols, APIs and SDKs, device management, etc. Analytics Platform has different analytical functions, visualization functions, machine learning services, etc. Cognitive Platform has human cognitive capabilities like speech recognition, image processing, gesture recognition, etc. User Interface Layer is typically a mobile or tablet or computer to display the dashboard, alerts and also UI to control the application or send requests to Cloud or filter analytics. Now let's see the most important aspect of IoT that is IoT architecture. And I think this is the most important slide because irrespective of any application the standard or the common architecture will remain same for any application.

So we need to understand this architecture and so that it becomes very easy to deploy any IoT application based on requirement. It has sensor attached to physical thing to collect different properties like air quality, temperature, light intensity or any some similar thing. It could also have actuators like electronic switches or relays or motors, sliders to perform certain electromechanical actions. They are connected to microcontroller or gateway either through wired communication or wireless communication like VLE which is Bluetooth flow energy, LORA that is long range and ZigBee or there could be many more.

The microcontroller. The microcontroller or gateway has internet capabilities like WiFi or GSM. The gateway collects the data, filters it and stores it temporarily and then sends it to the cloud via different application level protocols like HTTP, MQTT, AMQP, COAP, etc. The IoT cloud has different parts like REST APIs and data streaming to interface with gateway rule engine to define the business rules like if this happens then do that. So all your application functionality or the features of the application are defined in the business rule. It has either RDBMS or NoSQL as data storage mechanism.

So depending upon the requirement you can select either normal relational database management system or NoSQL. Other components of IoT platform are analytics and visualization and device management for registering devices, upgrading the device firmware and some security features. The IoT cloud sends dashboard of process data or analytics to user interface to give the user a snapshot of what is happening in the IoT application. It also receives some alerts in case there are some exceptional events happening. Using the user interface user can also control the actuators either directly sending message to microcontroller if it is in the close vicinity of IoT deployment or it first sends the commands to the cloud which in turn sends them to microcontroller and finally microcontroller gives the command to the actuator as desired by the user.

This is the complete end to end workflow of any IoT application. You can change any type of sensors, the type of actuators or even microcontrollers, you can have different communication protocols, you can use any IoT cloud or type of user interface but the architecture and information flow always remains same. That is why it is why it is very important to understand the IoT architecture thoroughly. Now we will see the broad categories of IoT that is hardware, software and connectivity. These are the three essential components for making any IoT application.

Now let us take a high level overview of different technologies used in hardware, software and connectivity. First we will see some mature technologies which are well established in the IoT market. In hardware there are different types of CPUs, security chips, sensors, actuators and gateways. These exist even before IoT was emerging technology. In software, cloud computing is the oldest and most mature technology. Other mature technologies are an IoT platform that are extended versions of cloud with some additional functionality specifically developed for the IoT. In hardware technology.

Age analytics that is the analytics performed at age or local level. In connectivity, WLAN that is wireless local area network. WPAN that is wireless personal area network. Cellulars like 2G, 3G and 4G. Then there are certain technologies that are comparatively newer technologies but still exist for a few years and are well established. In hardware technologies there are DRAM that is dynamic random access memory. FPGA that is field programmable gate array. In software there are IoT based streaming analytics which means making analytically informed decisions in milliseconds by processing huge streaming data.

Supervised and unsupervised machine learning are two major types of machine learning techniques used to train the models in machine learning. In connectivity there is LPWAN that is low power wireless area network which is becoming very popular for applications like smart cities and precision agriculture. Then there is a published subscribe type of application level protocols. In emerging technologies there are new and promising technologies but still they are not yet deployed at mass level. In hardware there are GPUs that is graphical processing units, NAND which is type of flash memory, ASICs that is application specific integrated circuits and neurosynaptic chips which function like a biological brain.

In software there are containers which are used for operating system visualization, IoT marketplaces where different people can make their IoT products available for access to end user. Like mobile app store like mobile app store and digital twins that are virtual replicas of physical devices used to simulate the behavior before actual deployment. In connectivity, eSync is an embedded sync used in mobile phones that can work for any carrier network virtualization which is a virtual network instead of physical network. by ön offered by einsting the systemfahr Catlip sub- inn o.

n. Amen. Technology, which is the next cellular technology after 4G. Lastly, we will see some yet to come technologies that are still in research laboratories. In hardware, there are smart sensors, machine learning optimized gateways, and quantum computing. In software, the upcoming technologies are real-time database, serverless FAAS, that is functionality as a service, and deep learning. In connectivity, the upcoming technologies are Wi-Fi 6, TSN, which stands for time-sensitive network, satellite IoT, and Wi-Fi, which uses light for wireless connectivity. That marks the end of third section on building blocks in IoT.

Want the rest of Developing IoT Applications?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Developing IoT Applications course

The remaining 87 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Developing IoT Applications course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.