← Course overviewFree lesson 1 of 3 · lesson 1 of 48Next lesson →

Unlock all 48 lessons of Design of Sheds with GantryFull course ₹40,000 · paid

Price & syllabus
Free lesson · 33 min · no payment

Components, Column Spacing and Orientation in Steel Gantry Sheds

A free lesson from Skill-Lync's Design of Sheds with Gantry course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Design of Steel Sheds with Gantry”

What will you learn in this free Design of Sheds with Gantry lesson?

The instructor defines a gantry, shows single and double girder EOT crane examples, and names the parts of a shed such as columns, purlins, bracings, corbels and rainwater gutters. A sample STAAD model then illustrates column spacing (6 to 7.5 m for economy), load path, column orientation and I, box, star and battened sections.

  • Parts of a steel shed with gantry
  • Choosing column spacing and locations
  • Column orientation and deflection control
  • I, box, star and battened column sections

What comes after lesson 1?

The next free lesson is lesson 2, “Member Sizing Thumb Rules, Roof Slope and Base Plate Types” (35 min). Later in Skill-Lync's Design of Sheds with Gantry course (paid): lesson 4, Design of Gantry Girders; lesson 5, Specifications and Selection Criteria for Crane Rails as per Indian Standards; lesson 6, Design of Gantry Girders: Detailed Overview and Calculations. The full course has 48 lessons (21 h 46 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Hello everyone, welcome to the course on Design of Sheds with Gantry. This course is split into 12 sessions, one each per week. Each week is followed by a challenge. After end of the 6th week, you will be assigned a project and another one at the end of 12th week. Now, coming into the actual course, what you will learn in the course? This course actually covers the design of steel shed with gantries using Stad design software. After the completion of this course, you should be able to understand the basic framing arrangement of any steel structures.

Also, you should be able to calculate and apply the dead loads, live loads, and crane loads of the steel structures. Calculation of wind loads as per IS 875 part 3. You will be able to do the Stad modeling analysis and design of a steel structure as per Indian standards. You can use these basic principles to design the steel structures as per other international codes as well. Now, let us understand first what is gantry. Gantry is a bridge like structure with or without a platform supporting equipment such as crane motor, crab, hoist or hook, electrical cables and other associated machinery with the elevated crane.

Now, why this course is so important? Why one need to go through this course of sheds with gantry? These type of structures are very common in wide variety of sectors like island gas industry, chemical industry, cement industry, power sectors, lift irrigation schemes and even water distribution system where pump houses are installed. In all these areas, this type of structure is very common. And even you can observe these type of structures in warehouses. In the latest, even the Amazon warehouses in Hyderabad, they installed a huge crane capacity with a huge shed that is almost built in a 1 lakh square feet area or more than that.

Now, if you see these pictures, you can say for your simple understanding, for your basic understanding, these are the typical sheds with elevated gantry structures. In the first one, if you see here, this one is a single girder EOT crane. And this one is generally used for crane capacities up to 10 ton or in some cases up to 15 tons also, depending on the span of the crane. And the other one is like this one is double girder crane. And the other one is like this one is double girder crane, EOT crane. These double girders are required when you have the crane capacities of higher size. Say these girders will be generally used in 10 ton capacity to even up to 100 ton capacity or more also.

And another area where the gantry structures are very common is in the power plants. This is a picture from a 660 megawatt power plant in Hardwagansh UP, where you can see crane gantry girder. The roof is a steel truss type roof. And this gantry is used to lift the machinery at this machining floor level. This crane is operation only during maintenance or even during the installation of this machinery. In this case, these cranes are of almost 100 tons capacity or more also. And this one is from a manufacturing industry. Here you can see in this one, there are multiple crane girders or cranes running over the same crane girder. This is a one type of sheds where multiple cranes will be used simultaneously.

So these cranes are generally used very frequently, like on a daily basis. Also these will be used. Next one is common components of the shield shed with gantry structure. In this columns, the main part of this steel, any steel sheds is columns. In that we have two types of columns. One is main columns and the other is gable and columns. The difference I will show you soon with an example of stair model. And the other one is roof supporting arrangement framing. That is either it will be of rafter beams like in a portal frame or roof truss.

Then roof purlins. Roof purlins will support the roof sheeting and transfer the loads from the roof sheeting to the rafter beams or roof truss. Again then side girders or we call also side runners. These are again to support the side sheeting. In shed type structures, normally the sides will be covered with the sheeting, like galvanized sheetings to the entire height. Some cases we generally cover up to some height, 2 meters or 3 meters, it will be brick wall. Above that, this sheeting will be there to cover the entire building.

And then bracings. Bracings will be of vertical bracings will be there and horizontal plan bracings. These horizontal plan bracings will be the rafter level or roof truss level. And then corbel. Corbel is to support the crane girder. And this crane girder carries the gantry crane. Next, again this is crane girder. And then rainwater girder and water sports. These rainwater girder is another important, mainly not from the structural point of view plus, but in case of serviceability point of view, rainwater girder and water sports are also important.

And these also need to be taken care of while designing the structure. And then roof panels and side panels. In this picture, this is an example picture where you can actually see the different type of different components of the structure. Here, this is roof panels and again side sheeting will be there. And this structure is a shed with portal type framing. Instead of portal frame, in some cases there will be roof trusses also will be there. But this is only for illustration purpose. I am showing these things.

Here you can see the rafter and columns. These are the purlins. These purlins will run from rafter to rafter in this case. And you can also see the plan bracing. Here also is one, two sets of plan bracing is there. Here also you can see the plan bracing. Here they used X type plan bracing. And then we have rainwater gutters also there to carry the rainwater from the roof to the ground. And downspout pipes will be there at a continuous regular intervals to carry the water without blocking the rainwater there.

Hopefully, by now you must have got an idea of how a steel shed with gantry looks like. In this week's session, we will talk about the basic geometry and structural framing arrangement of the structure. In that one, first one is column spacing. What column spacing is optimum? What column spacing shall be used? Also about the different types of column sections that are commonly used in shed type structures. We will also talk about the orientation of columns. Many times this factor gets ignored, but orientation of columns decides the economy of the shed.

At the same time, wrong orientation of the columns can lead to collapse of the structures. We will talk about thermal rules for member sizing. Here, you will get to know of the thermal rules for arriving at the initial member sizes of different components before starting the detailed design. These sizes can be used as an input to the Stad software for design of steel structures. Then next point is slope of roof. Here, I will explain about the roof slope to be considered based on different factors and types of roofs.

We will talk about the base plate configuration also. This is one of the crucial items which will in turn govern the overall structural economy, deflections, and even the foundation sizes are also. Depends on the type of belay plate we are going to use in a typical structure. Next one is bait, bracing pattern. Different types of bracing systems and their applicability to different scenarios will be covered in this part. Next is crane supporting arrangement. Various arrangements for supporting the cranes will be explained in this part. Next is crane vendor drawing.

Crane vendor drawing is the drawing provided to us by the crane vendors or supplier. In this drawing, you will learn about how vendor drawing looks like and what information it has in it for our structural designs. After this session, the students will be able to finalize the sheltered geometry like positioning, spacing, and orientation of columns, preliminary member sizes of the columns, brace, beams, bracings to start with before the detailed design, type of bracing pattern to be adopted for the particular case, and also the bracing base to be decided, base plate configuration to be adopted based on the position of the columns and base fixity type, and also the requirement of the structure.

lecture, deflection point of view and also the foundation, soil types also will govern the base plate guard vibration. Crane supporting arrangement based on the crane vendor requirement and usage. So let us begin our first point, column spacing. Now column spacing is decided by various building principles. We will discuss them one by one. And even if you get confused now while we are discussing it, don't worry, I will make it more clear by a start example. So to start with columns, shall be located as near the corner of buildings as possible.

Or even the column shall be located at the intersection of walls. If the columns are located a bit away from the corners of the building, then we need to provide cantilevers. If cantilevers are provided, it will affect your structural economy and also it will lead to large deflections. And these deflections are not allowed, large deflections are not at all allowed in case of crane girders. In case when, if the building consists of cranes, gantries. So as much as possible, column shall be located at corners of building and at intersection of beams and walls.

If columns are located away from intersection of beams and then it will lead to large movements in beams and hence your beam sizes will go up. Your beam depths will go up. Now as a structural engineer, you know our role is not only to design structure for given loads or for given geometry. As a structural engineer, we are responsible for economy as well. We are responsible for safety as well. We are responsible for meeting the service requirement of the building as well. These all points are very important in deciding the columns, locations and column spacing.

Now coming to the next point, we find the right column spacing. We should avoid larger span of beams and center to center distance between columns. We should avoid it being very large spacings of columns. This will lead to increase in beam sizes and thereby overall economy of the structure. It will lead to higher cost. If center to center distance between columns or balance is high, then your beam depths will go up. Higher depth beam sizes will affect the economy. It will affect occupational use of the structure as well.

Column shall be provided little away from the property line to accommodate the foundations within the property line. In this picture, you can see the column center line is kept at 3 meter away from the property line. These are required because to provide the foot foundation or footing, isolated footing or pile foundation, whatever it may be. We need some space to accommodate that within our property. We can't keep the columns near to the boundary. And also it is necessary to get the municipal approval as it requires minimum setback distances also.

And other aspects that govern the column positioning is shelter entry and maintenance requirements. You can't provide columns which will obstruct the movement of vehicles into the shelter or if you want to remove equipment from the shelter to the outside for maintenance purpose and the column should not obstruct that one. So for that purpose, we need to take care of the column position keeping in view of the service requirement of the structure itself. In this case, in this picture, this shed is a fabrication yard shed where steel members were fabricated in this shed.

Now they have to lift the fabricated members onto the vehicles within the shed using this gantry crane is also there in this part of the shed. So vehicles, heavy vehicles will enter into the shed. So if you provide a column at these places, then it will obstruct the vehicle entry and the whole purpose of the structure itself will become an absolute. So hence the columns at these locations shall be avoided keeping in view of the service requirements of the building. Another important aspect is, again, this is for maintenance requirement.

This is a plan from a heavy vehicle service center shed. Here, heavy vehicles will come into the shed for maintenance purpose or repair purpose or for service purposes. So for that purpose, to allow the vehicle entry, they kept the column spacing to 30 feet. That is almost 10 meter. For effective column spacing to get the best economical structure, we generally, we provide 6 to 7 and a half meter column spacing, which will lead to economical point of view. But in this case, as if you provide 6 meters, 7 meters spacing columns, then the vehicle entry will become very, very difficult, as there is no space to turn the vehicle beyond the structure.

So we need to keep an eye on these aspects also before deciding the column positioning. So firstly, column spacing and location shall meet the service requirement of the building. And then only we should think about the structural economy satisfying the safety requirements. We should always interact with other departments, personnel like R-Tech team or MEP team to check the possibility of making some minor changes to their requirement, which may lead to better structural safety and economic point of view. If you are into oil and industry or chemical plant industry or any other process plant industry, we should also check with other departments from where the pipes are coming and entering into the shed.

Suppose we have a pump shelter. In the pump shelter, some pipes will come from outside and enter into the shed and will be connected to the motors and pumps. So we need to make sure such that these pipes will not come in the way of columns. Or I mean to say columns should not come in the way of these pipes. We should move or position the columns in such a way that these columns will not obstruct the main service requirement of the building. That is pipe entry and exit points.

And coming to the next point, ideally, if there are no restrictions from the service point of view, if there are no restrictions from the entry of vehicles or equipment removal or maintenance purpose, then ideal spacing of columns shall be 6 to 7.5 meter. And this is based on the standard regular industrial practice. And we will get economical structure if you provide this column spacing in between anywhere near to these spacings. Overall economy, not only the column sizes, but even the purlin sizes, beam sizes, bracing sizes, and even the foundations also, we can economize if the spacing is limited to this.

But again, we can't always meet this requirement because the service requirement will vary for structure to structure. So that is one point. And the other thing that I want to tell is the spacing of columns. If the structure is, say, 50 meter length, we should not keep the column as much as possible. We should not keep the columns spacing. We should not vary the column spacing along the length of the structure. As far as possible, we should keep the column spacing same. Say, if a structure is of length, 50 meter long length.

If we decided to keep it, the column spacing to, say, 5 meter, then we can actually accommodate the entire 50 meter length by 11 columns. But if we keep one bay length as 5 meter, the other bay length 8 meters, the other bay length as 7 meters, it will lead to a lot of, in the sense, it will lead to a lot of rework during the fabrication of the structure and even the erection of the structure. So it is better to avoid those. But again, this point, for service requirement, we may have to go for different ways spans depending on the industry which way this structure is involved in.

As of now, we discussed the different aspects which governs the column positioning or column spacing. And also, we discussed basic components of any regular type of shed structure with Ganttree. Now, I will show you a sample starred model in which I will explain you all the different components of the structure in the starred model so that you can better appreciate the points as discussed as of now. Now, this is a pre-engineered building of a warehouse with a crane capacity of 10 tons. And this one I am showing you only for representation point of view.

It is not for actual your project. It is not related to any of your assignments also. I am just explaining the structure so that whatever points we discuss as of now. If you see in this plan, the plan bracings or bracing are provided in three ways. One is here, here, and at the end. These are plan bracings actually. Plan and vertical bracings are also provided in the same ways. So, if you can see the entire length of the structure is like 74 meters and the width of the structure is main main framing is like 16 meter, approximately 16 meter.

If, let us see the base spacing also. Here, the base spacing is not uniform. This is as per the requirement of the service. Also, if you observe, I will select one based frame, Bay. If you see here, these bracings are not going till the foundation level or base plate level because as per the service requirement, they need this area as an open one. So, they stop the bracing here and they will have to make a different arrangement like moment connection type here to make the structures stable.

You will get to know more of these details in the later sessions. But, in these sessions, I am just explaining you about the different components of the structure. Okay, this is the whole structure. Now, again, I will show you one aspect, one thing I want to tell you is regarding the Gabel and columns and main columns. These two are Gabel and columns. We call these columns as Gabel and columns and other, these are main columns. Why we call as Gabel and columns? These Gabel and columns actually will not provide support from the roof, but actually these are provided for supporting the side sheeting on this side.

If you see, there will be some side sheeting or brick walls will be there and wind load from that side has to be resisted by these columns. Okay, if you see, again, I will show you a rafter level plan. You can see here some tie beams and these are called perline level. Rafter level tie beams are provided here along the column line. These are the both Gabel and column line. So, lateral load coming from the side sheeting onto the columns and on those columns. At the top, those loads will be transferred to these tie beams and tie beams to these bracings and these bracings will go into this plant bracings.

And from this plant bracings, these loads will transfer to the vertical bracing and vertical bracing to the foundation. This is the load path that we need to ensure while deciding the structural arrangement of any steel structure. Even for that matter, even the concrete structures also, we need to take care of all those things. This is not only restricted to this type of industrial set, but this concept we need to remember for any steel structures, especially steel structures. Why I am saying is in the concrete structures, generally the slab, there will be concrete slabs will be there.

It will provide a lot of in-plane rigidity and that slab will transfer the loads later, all the horizontal loads to the columns automatically. But not in the case of steel structures, especially these type of sheds where there will not be any concrete slab. There will be only roof sheeting that is not stiff enough to transfer the in-plane loads onto the columns. Again, these type of, this phenomena of structural arrangement, framing arrangement and load path transfer, transfer of loads from the roof to the foundations, all these concepts you can get more clarity after the, probably on you, after the first project you come, after you, once you start doing the first project.

Then you will get to know and you will appreciate the importance of this load path and structural arrangement framing arrangement. Again, we will, we will go to the next part of the contents that is column orientation. Now, orientation of column is one of the most important point. When you provide your column, make sure you be orientation of column shall be in such a way that major axis bending, major axis of the column shall be in the maximum direction. That we need to ensure to get the economy of the structure.

That is one point. The other important point is deflection also. If we keep the major axis of the column in the opposite to the major deflection direction, then the deflections will go up. That will not serve the changing requirement of the crane grantry structure. So, we need to keep an eye on the orientation of columns also. Those are very, very important to keep those columns in the correct orientation. And the other points that I would like to mention is the projection of columns. Projection of columns inside room will create issues like unable to flush furniture to walls, floor space obstructions, bad appearance.

All these things actually we need to take care if the architectural requirement is very much required to satisfy these points. Otherwise, other than this, the main structural framing arrangement, load transfer and deflection criteria will govern the orientation of the columns. As I said earlier, the columns should be perpendicular to the major axis of bending. This helps in increased moment of inertia about the major loading direction or major force direction and thereby lesser column size. Also, that will lead to the high loading carrying capacity of the column.

This is a sample typical bending moment diagram of a portal frame for gravity loads alone, dead load and live load. In this case, you can observe the basis or fixed basis. Okay, here you can see this is a fixed basis. That's why you have a significant moment only. You have moment here and here also. You can see that the major bending is perpendicular to the framing. So, major, the column orientation also should be like that only. We should take care of these moments and also it will help in controlling the lateral deflection because of wind or seismic also.

And also there will be some loads in transfer direction due to crane also, crane moment, transverse loads will also be there. So, all these things, whenever cranes are there, lateral deflections will govern the column sizes, even the column spacings also. Because for crane girders, this allowable lateral deflections are very stringent. If you allow more deflections, then there is a possibility of gantry falling off from the rails of the crane girders. So, that's why allowable lateral deflections for gantry structures are very stringent. In some cases, it is height over 500.

In some cases, it is height over 1000 also will be there. Coming to this orientation of columns. This is a typical plan showing the column orientations of an industrial shed. This is a two-bay shed actually. This is not a, there is a central column also is there. In here, you can observe the orientation of columns. All the main columns orientation or major axis is parallel to the longitudinal axis of the building. And there are gabeland columns are also present. Orientation of these gabeland columns is different from the main columns.

Since the purpose of gabeland columns is to resist the lateral wind. So, the direction of or orientation of the column, these gabeland columns are different from the main columns. So, again, I want to clarify that. These are the main columns and gabeland columns are here. These four are gabeland columns. This one is a major main column itself because this is a two-bay gantry structure. And at this end, there are no gabeland columns are there as there is a vehicle entry point is there. That's why they have avoided the gabeland columns in between.

Next, I will like to cover one more point in this part of the session. And that is about the column section types. There are different type of column sections we can use in a industrial shed or any other sheds. These are based on shapes. I can say I section or H shaped section. These are the most general type of sections we came to see in most of the structures. I or H shaped sections. And then we have some box shaped sections also will be used in very rare cases.

Please, verb. So this one will come into picture where you can't provide longitudinal bracings along the length of the building. So in that case you need to have higher movement of inertia capacities in the minor axis direction also. In those cases these box shaped sections are preferred. And then the same with the star shaped or double I sections. Again these star shaped or double I sections are also used when longitudinal bracing arrangement is not possible. We need to have a movement framing in the longitudinal frame direction also. In that case we either go for star shaped sections or box shaped sections.

The advantage of star shaped sections is the connections are a lot easier compared to the box shaped sections. And then we have something called battened or laced columns also. These are generally used when we have smaller sections available at the site or at any locations. So we use two columns. So we use two columns. So we use two columns. So we use two columns. Two ISMB 150, ISMB 200 and we keep it at some spacing like 300 mm or 400 mm apart. And we connect it with side battened or lace seated and make it a column.

These are also very highly used in railway platforms. These are also very highly used in railway platforms and railway overhead platforms, walkway platforms and also mostly in the older structures. These type of columns are widely used. These type of columns are not used widely nowadays. Maybe reason could be that in the older days the lifting capacity of the sections is less. So we the crane axis is less. So the size of the columns they use to keep it as low as possible so that they can easily lift it and keep it in place as the structure.

And also in some senses actually it leads to economical of the structure as well. You can see the different type of sections in this here. So this is the standard I section or H section whatever you call and this is a star section that I said. One standard I section and the other two are will be welded to the web of the they will be cut into two pieces. So this is the other I section and will be welded to the web of this I section and this is a battened column two I sections are separated by distance and they are battened at regular intervals so that it this two members will act as a single column with this I will conclude this part of the session.

So in this part what we covered as of now is the introduction of Gantry structures and we also covered the different components of a Gantry structure shed and when coming into the column spacing and column orientations also we covered and now different types of column sections are also covered. The remaining parts are also will be explained in the next part of this session. Thank you.

Want the rest of Design of Sheds with Gantry?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Design of Sheds with Gantry course

The remaining 45 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Design of Sheds with Gantry course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.