Lesson finished
Unlock all 39 lessons of Computational Combustion Using Python and CanteraFull course ₹40,000 · paid
Installing Matplotlib with pip on Windows
A free lesson from Skill-Lync's Computational Combustion Using Python and Cantera course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 - Installing Matplotlib”
What will you learn in this free Computational Combustion Using Python and Cantera lesson?
This under-one-minute walkthrough shows how to install matplotlib on Windows from the command prompt. It checks that pip is installed, installs setuptools and matplotlib with python -m pip, then imports matplotlib in Python and types a few commands to draw a simple bar graph.
- Checking that pip is installed
- Installing setuptools and matplotlib with pip
- Importing matplotlib in Python
- Drawing a simple test bar graph
What comes after lesson 3?
Later in Skill-Lync's Computational Combustion Using Python and Cantera course (paid): lesson 4, Week 1 - How to install cantera; lesson 5, Week 2 - Basic concepts; lesson 6, Week 2 - Getting started with Python. The full course has 39 lessons (9 h 21 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Hey guys, in this video, I'm going to be showing you how to install matplotlib for Windows. First, open up the command prompt and then make sure that pip is installed and then type in python mpip install setup tools and then type python dash mpip install matplotlib. This process is going to take a little bit of time but not too much. Once this process is done, you can just launch python and then import the matplotlib module and then you can type in the following commands to create a simple bar graph.
I hope this works out. Thanks guys.