Lesson finished
Up next: Machine Tonnage, DFM Part Review and Injection Molding Defects
Unlock all 6 lessons of Basics of PlasticsFull course ₹40,000 · paid
Plastic Product Development, Mold Types, Draft and Parting Lines
A free lesson from Skill-Lync's Basics of Plastics course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 2”
What will you learn in this free Basics of Plastics lesson?
The lesson walks through the product development process and the departments in a mold manufacturing company, such as sales and DFM. It then describes two-plate and three-plate mold parts, and covers draft and parting line selection with examples.
- Product development steps from concept to tooling
- Departments in a mold manufacturing industry
- Parts of two-plate and three-plate molds
- Draft angles and good parting line practice
What comes after lesson 2?
The next free lesson is lesson 3, “Machine Tonnage, DFM Part Review and Injection Molding Defects” (34 min). Later in Skill-Lync's Basics of Plastics course (paid): lesson 4, Week 4; lesson 5, Week 5; lesson 6, Week 6. The full course has 6 lessons (2 h 31 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Hello guys, hope you're doing good. Welcome back to another session of Basics of Plastics. This is the second video of the series. In the last session, we learned about basics of injection molding. We saw about mold cycle. We also came across thermoplastics and thermoplastic processing and we learned about current scenario of mold industry. We also saw engineering plastics used in automobiles and most of the plastic material properties. So, coming to this session, the present one, we will be covering the product development process, various departments in mold manufacturing industry.
We will be looking in detail at the parts of the mold system, types of mold systems and we will also be learning about drafts and parting lines. This would be our learning objective. Okay, before learning how the tool design works, let me give you basic overview of how the entire plastic production process works. Initially, you have the requirements based on the customer's need that your product must fulfill. A concept sketch of the product will be created by the R&D team. Then, with reference to existing products and based on the properties required, selection of the material for the component will be done.
The first draft stage refers to the creation of the CAD model for the part. Then, this CAD model will be sent to the simulation team where the behavior of component based on loading conditions and different types of analysis will be performed. Based on the results of the simulations done, the simulation team may have some suggestions for improving the component. Based on those suggestions, improvements will be done on CAD model and finally, simulations will be performed on it. Now, after the product to be manufactured is finalized, the design for the mold in which the product will be made starts.
Now, the thing to note is that it is not necessary the entire process will be done by a single company. The final simulation step may be done by one company and then some other company may create molds for the finished product. That's why the steps from mold design stage is shown in a different color. After the design for mold is completed, based on the CAD of the component, production of tools starts and then part production can be started. Now, we will have a look at different departments in the mold manufacturing industry.
First, it's the sales team. They take the product from the OEM or product design department and quote an amount for the mold and basically handle all the tasks about purchasing, selling of mold, delivery time, the price for mold and all that. Once the customer is satisfied with the price and the delivery order will be placed. Once the order has been placed, the CAD model goes to the DFM team. DFM stands for Design for Manufacturing. This department basically checks the feasibility of making the mold design on the CAD diagram.
By feasibility, I mean that they will check whether the mold design for the part can be made or not and explain problems that might occur while making molds. The product design team may not be aware of the problem that might occur in mold manufacturing for that part. So, DFM department basically tells the customer what problems may occur in the mold design based on the product design provided by them. The purpose of the mold flow department is to identify the right inlet points to the molten material.
This will specify where the gate should be located. They will also analyze how the flow of material will take place. They do this by using simulation softwares that are available to check the flow of heat in the mold. They also do cooling analysis and warpage analysis. Warpage is a defect in plastic component. Warpage is when the plastic component after it is made, when it is cooling down, will be deformed due to, you know, internal condition. We will be covering defects in later session. Then comes the tool design team.
They get the gate point location as input from the mold flow team. The tool design team decides the cooling channel location, location of ejector pins, the core cavity separation, parting lines, etc. We will have a look at what are the parts of the mold in a short while. Basically, the tool design team is responsible for all the parts of the mold tool. Then comes the CAM programming team. They basically write the programs for making the tools. Then the material for tools is ordered according to the specification given by the tool design team.
Then the actual manufacturing of the tool will start using machines like CNC. Inspections include checking if the right dimensions have been achieved or not and whether the dimensions of the tools are within the tolerance. Then all the parts of the mold, the core, cavity, guide pillar and everything else is assembled. We will have a look at all the parts of the mold shortly. Then the entire tool is assembled into the molding machine. Then the production of plastic parts start. Then the parts which are manufactured will be checked using tools like PMM.
PMM is Coordinated Measuring Machine. It's a machine for checking dimensional accuracy of components. And after the parts are checked, they can be shipped out. So now we will go on to parts of the mold. Here we can see there is an animation showing how the injection molding process works. If you guys have taken a good look, we can go into the explanation. As we saw earlier, any injection molding machine has three main parts. The injection unit, core block and a cavity block. So this here is the injection area or this is where the plastic material comes in.
And we have a injection unit which is in the right most corner, but it is not shown in this picture. So next we have the cavity block. This is the cavity block and then we have the core block which is in the left side. We did come across the injection unit in the previous session. So we will see the other two blocks in detail. So the graphical format which we are looking at now is called the two plate mold. In the two plate mold, the cavity plate is almost always fixed.
So the right side of the system you see is fixed and only the left side that is the core side of the system moves. On top of the cavity plate, you can see the guide pillars. Guide pillars are used for aligning the core and cavity. Guide pillars will always be present on the cavity side of the mold and guide bush will be present on the core side of the mold. The length of the guide pillar should always be more than the core length so that it aligns before the core and the cavity aligns.
On the right side, we can see the sprue and the sprue bush. A sprue is a large diameter channel through which material enters the mold. If you look carefully, you can notice that the sprue is tapered outside or the outwards of the surface of the sprue is tapered. Because as molten material flows from the sprue to the cavity, there will be solidified material at the sprue region. And if sprue is straight, then it will scrape the surface of the sprue bush and it will be more difficult to remove.
This is also the exact reason why we give draft to components. We will be covering the topic of draft in later slides. You guys will be able to understand more about whatever we talked about draft. Now, you might also notice that a separate sprue bush is provided around the sprue. Now, why is the sprue bush a separate element? Because the material that is being injected from the nozzle to the sprue is very hot. The material of the sprue bush is specifically pre-hardened to handle this heat.
The material of the sprue bush is specifically pre-hardened to handle this hot material. Then we have the register ring. Register rings are provided for alignment for the entire tool with the molding machine. Don't get confused between the guide pillar and the register ring. Guide pillar is used for aligning the core and cavity where is the register ring is for the alignment of the entire tool with the molding machine. Then on the left hand side, you can see the core block which houses the core plate and core back plate.
This plate moves to the right, gets attached to the cavity plate or it gets clamped to the cavity plate. And then the material is injected in the region between the core and cavity. The injected material is allowed to cool for a while and when the part solidifies, the core plate moves back. Then we have the ejector pin. Once the part is formed and the core plate moves back, the ejector pins are used to eject the part that has been molded. The part of the ejector pin near the core is a transition fit.
So this area is called the transition fit. And then after some distance, release is provided for the ejector pin. The length for which transition fit is provided is called the guidance of the ejector pin. The part of the ejector pin near the core is transition. Then after the change is called the ejector pin, which is� Bit and then after some distance relief is provided for the ejector pit. The length for which transient pit is provided is called the guidance of the ejector pin and this length varies according to the injection molding machine and the path to be ejected.
One thing we have to note here is that every injection molding machine would have different types of pits when it comes to any kind of shaft hole mechanism. Generally, there are three pits, clearance pit, interference pit and transition pit. In this graphical format, the guide bush and guide pillar has a transition pit and by that I mean the shaft radius is equal to the hold radius. If you can carefully note the ejector pins, they have a clearance pit wherein the shaft radius is lesser than the hold radius.
And the same way, one thing we have to note here is that every injection molding would have different types of pits when it comes to any kind of shaft hole mechanism. Generally, there are three fits namely clearance fit, interference fit and transition fit. In this graphical format, the guide bush and the guide pillar has a transition fit and by that I mean the shaft radius is equal to the hold radius. If you can carefully note the ejector pins, they have a clearance fit for at least one third of the pin wherein the shaft radius is lesser than the hold radius and changed to a transition fit which acts as a guidance for the ejector pin.
In the same way, if the shaft radius is bigger than the shaft radius and the shaft radius is bigger than the hold, then it is called an interference fit. We will see examples on interference fit on the later period. Next, we have a screw puller and a screw puller bush with undercut in it. The main function of the screw puller is to pull the plastic screw formed from the cavity side using the undercut and eject it out from the core side after it is unclamped from the cavity side.
And then we have a return pin. The function of the return pin is to bring back the ejector plate back to the original position. The return pin may consist of a spring that gets compressed when the ejector pins move. So when the spring relaxes, the ejector system can be brought back to its original position. Then comes the spacer block. Spacer block basically defines the distance between the core plate and the moving plate. Moving plate is the plate you see at the left hand as we saw earlier.
The entire ejection system is assembled within this space. Here you have the ejector plate. This is called the ejector back plate. The ejector back plate is driven forward by hydraulic actuators through the main machine. Press buttons are provided behind the ejector back plate to reduce the friction that will take place if the back plate is directly placed beside the moving plate. This slide shows the surfaces formed by the core and cavity. The surface formed by the cavity is called the A surface and the surface formed by the core is called the B surface.
The surface between the A and B or the surface on the thickness region is called the C surface. We will now look at actual specification diagrams of the mold assembly part. Here you can see the diagram of the entire mold tool. On the left side we are seeing the front view of the mold tool. The circles which you see at the edges are guide pillars and small circles which you see is for clamping. There are some standard dimensions available for selecting the mold block. For example, let's say you need a 196 by 196 block for a mold.
But one of the standard sizes in the market is maybe 200 by 200 block. So you will have to buy the 200 by 200 block and cut it to the required sizes. All the parts which we will be looking at in the mold design have some standard sizes. All the dimensions are selected based on the available standard. Here on the right side BP stands for bottom plate. SB is for spacer block. CB is for core back plate. On the right side of that you have the core plate.
Then CV is your cavity plate. EV is the ejector back plate. EP is the ejector plate. This diagram shows the front view of the mold tool. And here we can see the sectional view. And at the bottom you can see the transverse screw used for fixing all the individual plates. You can also see there is a screw which is fixing both the ejector plate and ejector back plate together. As we already saw the screw has an interference bit as clearly the shaft radius is bigger than the hole radius for it to act as a screw.
Next you can see the diagram for the guide pillar. The part of the guide pillar that enters the core when the mold is in closed position is called the core region. The core region of the guide pillar needs to be hardened as it will be sliding in and out of the core thousands of times while making components. G6 and F7 which you are seeing here are the various types of bits and they are tolerance values for a given shaft. The inverted triangle denotes the surface roughness of the guide pillar.
Here we see the diagram of a guide bush. You can see that the inside surface also needs finishing as the guide pillar will be sliding through it. In this diagram the bottom part which we see is the ejector guide pin. Its purpose is to align the entire ejector system with the core plate. And the ejector guide is surrounded by the ejector guide bush. The component on top is the return pin. As we saw earlier in the previous video, this is the schematics for a screw puller and its bush.
The component is on the core side and pulls the screw from the cavity side. The reason for the inverted taper is that more pulling force is acquired compared to the straight section. So this will ensure that material is not cooled down at the cavity section itself which will block the passage of material. The tapered section which you see is also called cold slug well. Here in this diagram you can see diagram for the sprue bush. You can see that the taper for the bush is one and one and a half degrees.
This is a standard taper for a proof. Another point to note is that the core thickness must be more than the cavity thickness. This is because the molten material will enter the core side at high pressure and this may cause depression at the core side. So to avoid that we provide a higher thickness on the core side. This is the diagram for the register ring. The center line that you see here must align with the center line for the molding machine. This is the diagram for the ejector pin.
The ejector pin is also case hardened as it will be engaging with other components in every cycle. So to reduce the wear on the part we harden it. Ejector pins can be of different shapes and sizes. The one which we saw in the video or the graphic format had both transition and clearance fit. This has only a transition fit. So yeah, it can vary with the components it is ejecting. And this slide shows the ejector guide pillar and ejector guide bush. So there are many types of molds.
For example, low high cavitation molds, family molds. The one we are discussing from the beginning is called a two plate mold and the same way there is a three plate mold and more. The basic mold type used is what we discussed before. And we will also see one more type like I mentioned previously which is in the three plate mold. The first plate which you see on the left is fixed and contains this proof. So if you guys can see the animation running. This is the three plate mold.
The second plate represented in yellow color contains all the runners and the cavity. So in this case we can see the cavity plate is also moving varies in the second or two plate mold. The cavity region is fixed. The third plate contains the core and the ejection system. So this part is the same as the moving plate of the two plate mold. We can see that the only difference in construction of the three plate mold is that the fixed plate of the two plate mold itself is split into two parts.
As there are three plates in this case the runner and the main part are automatically separated in the molding process. Where is in two plate mold if you remember the material in the runner is attached to the main part and has to be manually separated. So the advantage of the three plate mold is that the secondary operation of cutting the feed system is avoided. Due to this the production time is reduced and hence for mass production three plate mold will be preferred. However the cost of three plate mold is also more compared to the two plate mold.
So if you if there is an order of like 500 or 1000 components then it doesn't make much sense to use three plate mold and two plate mold will be used. Next we will see about draft. A draft angle is an inclination from the vertical axis of the mold or you can see a taper provided in the mold. In the case of plastic molding a small draft angle is always provided for the components being manifested. This is done to facilitate easy removal of the. If no draft angle is provided, then when we try to open the material or remove the material from the mold, the component will scrape the edges of the mold.
This can damage the component and may result in scratches on the component and in some cases may also cause breaking or bending of the component. Zero draft angles may also result in vacuum being formed when the material is pulled and thus more forces required to push the components out of the mold. In this cases, problems like warpage might be happening. So all the plastic parts that you see around you that were created using injection molding, all of them have draft. The amount of draft angle that needs to be provided will depend on the polish and surface finish of the mold tools.
And this polishing done will depend on the customer requirements. For example, it is more difficult to remove a textured component. So higher draft angles will be provided for textured components. And all the components that you see, which has a glossy finish have been made using high polish tools and thus lower draft angles will be required for their manufacturing. Draft angles generally used may vary from as low as one by fourth of a degree to two degrees. In this diagram, you can see how the draft angles are provided for these components.
It technically can eject the parts even without providing draft angles, but then the plastic will check in these parts. And then when the part is removed, you will see scratches and marks to it. To be more clear, if you can see in this first picture, this is the wall. So what if this draft is not provided? If this is not provided, then when we take the component out, it is going to scratch with the wall. And that is exactly why the scrape marks will be shown.
The draft angle will also depend upon the molding depth. Here in this graph, you can see that as depth increases, higher draft angles are required. But one important point to note here is it is not always possible to give higher draft angles for deep parts due to dimensional variation. For shallow part, the draft should be around half a degree or little more than that. For deep parts around one by fourth of a degree, draft angle may also be given if giving higher draft angles is not possible.
Draft angles also depend upon the material property picture. For example, it will be more difficult to eject a stiffer material. So higher draft angles are provided when working with such material. This slide shows the problems that might occur if no draft angles are provided. Ejector pin marks will be present as there was no draft. More force need to be applied by the ejector pins to eject the part which will leave a mark on it. Normally only any part, any plastic molded part will have ejector pin marks.
But those marks are mostly not visible. But with zero draft angle, the visibility of ejector mark is going to be higher, which makes it undesirable for the customer. Ejector pin breakage because if no draft is provided, then more force will be required to eject it, which may damage the ejector pin. Warpage is a defect that might occur because of no draft. It is basically undesirable deformation of the desired part to be molded. LV scratches formed at the core and cavity region and the ejector system may also bend due to no draft.
So the next topic is the parting line. The parting line is the line that splits the mold system into two parts. The section formed on one side of the parting line will be the core and on the other side will be the cavity. We generally try to keep the parting line in a straight line as in a single plane. If not in a straight line, then it's more difficult to manufacture and assemble the mold. In the picture shown, the red block forms the cavity and the blue block is the core block.
We know that material passes inside to fill in the available mold gap and thus you can visualize a parting line that is separating both these blocks. So in this slide, I have shown some real life plastics in which we can easily come across the parting line. The first one is a mouse and if you can notice there is a crease between the mouse button and the body where you can see parting lines running through. The same goes with this tab and also I have shown a remote cover here.
An interesting thing you can note here with this remote cover is that it gives us the embossing which has the material properties. So in this case, it is HIPS and ABS. So it is a mix of HIPS and ABS. The grade will be given to the manufacturer by the client. So these two materials, HIPS is high impact polystyrene and ABS is acrylonitrile butadiene styrene. These two materials have great impact resistance and are very easy to manufacture. This in turn increases the aesthetic nature of the material.
Now let us look at some examples showing good practices for parting line. In the above figure, the molded product will have a mark along the parting line. But in the bottom figure, no such mark will be present as the parting line does not cut through the part. So if possible, we can try to provide a parting line on the outer edge. So there may be some cases where it is not possible to provide parting lines on the outer edge. So in those cases, you can insert a bead in the parting line or parting surface.
So that section is shown in this figure. Introducing such beads along the parting line will allow easier cutting of the gating system and the defects also won't be very apparent. So here we see that the top and bottom sections are misaligned. So the top left or the left top bead was offset a bit to extend over the lower bead. In the right side part, the defect won't be as apparent as the first one. So these are some tips regarding the selection of the parting line. We will be seeing more about the parting lines and parting surfaces in the upcoming questions.
OK, by the end of this video, you should have an understanding of how a new product development process takes place and what are the departments in the mold manufacturing industries. You should also be aware of the parts of the two plate mold and their respective functions. We also had a brief overview of the working of the three plate mold. We also learned about drafts and parting lines in this session. We even saw some examples for parting lines. And I think that is it for the session.
Thank you for watching the video.