← Previous lessonFree lesson 3 of 3 · lesson 3 of 50

Unlock all 50 lessons of Analysis and Design of Buildings using STAAD.Pro - A Professional ApproachFull course ₹40,000 · paid

Price & syllabus
Free lesson · 19 min · no payment

STAAD.Pro Analysis Types, Structural Systems and Beam Design

A free lesson from Skill-Lync's Analysis and Design of Buildings using STAAD.Pro - A Professional Approach course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 3”

What will you learn in this free Analysis and Design of Buildings using STAAD.Pro - A Professional Approach lesson?

The session reviews the analysis options in STAAD.Pro, from Perform Analysis to P-Delta, pushover and buckling. It fixes an instability warning by changing the structural system, reads shear and moment results, and sets design parameters for a concrete beam to Indian code.

  • Linear, P-Delta and other analysis commands compared
  • Space, plane, frame and truss structural systems
  • Viewing displacement, shear force and moment diagrams
  • Setting concrete beam design parameters and reading reinforcement

What comes after lesson 3?

Later in Skill-Lync's Analysis and Design of Buildings using STAAD.Pro - A Professional Approach course (paid): lesson 4, Analysis and Design Structure Using STAAD.Pro; lesson 5, Design Flow Chart and Individual Member Design in Staad Pro; lesson 6, Designing a Reinforced Column Using Stat Pro. The full course has 50 lessons (17 h 36 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Welcome back to session 3 on the Analysis and Design Structures using STAT-PRO. In our previous session, we discussed the interface of STAT-PRO, which offers us the material, and we used in-built materials to assign material specifications to the structural element. We also discussed the support conditions, and while dealing with the support, we understood how a support behaves. We discussed the degrees of freedoms and how it affects the behavior of a support, by virtue of which you can understand support condition assignment and use it to give restraint to a joint or node of the structural model created.

And on the loading part, we understood the orientation of the beam, following which we understood and identified the global access system and the local coordinate system of a member in the STAT-PRO software. Now, in this session, we'll discuss the next step involved in the process, which is Analysis and the Design. So now, we have specified uniform loading over the beam. So, let us analyze it first before designing it. Before going for the analysis, let us see the analysis options available in the STAT window. The first being the PERFORM analysis.

This PERFORM analysis does a linear static first-order analysis. This is mainly used for a building of primary load cases, wherein the governing load cases and combinations are majorly primary. And for any single element you want to design, you can go for the PERFORM analysis command, since it goes for a first-order linear analysis, which is elastic. And then, I go for second-order analysis. They have a governing load case, which is either SESAMIC or just majorly SESAMIC. I go for PDELTA analysis. As the name suggests, it calculates the moment with respect to the applied load and the delta, that is, the deformation under the governing load of the building.

So, this PDELTA analysis is a second-order iterative analysis, where I can give the number of iterations to extract the model shapes, which will be a governing factor for a high-rise building undergoing SESAMIC load case. My next analysis is PERFORM cable analysis. It is available in the STAD advanced edition, by which every member is assigned as a cable and it again is an iterative process. Next is PERFORM imperfection analysis. This is used whenever a member has been specified or a given member imperfection. You assign a camber, for example, you assign a camber to any specific member, as I mentioned.

You can go for the imperfection analysis. The next is nonlinear analysis. This nonlinear is again an iterative analysis. It carries out a static nonlinear analysis. This nonlinearity is applied to the geometry, but the only thing to be noted in this nonlinear analysis is, it is not applicable to solids, and it does not consider the plastic movement hinges while carrying out the analysis. Next is the GENERATE FLOOR SPECTRUM analysis, and this is again used for high-rise buildings, where we have to check the floor diaphragm. We have to assign a node wherein the diaphragm acts in to study the stress variation of the floor whenever there is a movement or the deformation with respect to wind load or the uplift load or due to the sequential analysis.

Sequential analysis is based on the sequence with which the construction is carried out. The live load, the varying load, and accordingly, the floor spectrum or the floor stresses are studied using the GENERATE FLOOR SPECTRUM analysis. This performed direct analysis is followed or is adopted in this software with the basis of AISC code. It performs a nonlinear iterative analysis. And next is the PUSHOVER analysis. As the name suggests, this again is to carry out an EARTHQUAKE LOAD CASE analysis wherein the deformation of the structure is majorly studied and the buckling analysis, as the name suggests, is for considering the buckling of a member.

And it again is an iterative analysis. The nonlinear perform capable analysis, the buckling analysis, and the direct analysis are associated with the STAT advanced addition. And as of now, with a single element being designed, let us go for the perform analysis command. I am giving here the perform analysis command. Now, I am running the analysis. Now, as you see, my analysis is done and I am notified of a warning and a note. So, to see what it is, let us go to the output file. Okay.

The warning is that it has detected an instability at the joint. So, let us resolve this. Let us go to the command file. You see here, it considers a model as a space. In the previous versions of STAT Pro, there was an option to specify the type of structural system on the very first page of the software. Now, in STAT Pro Connect Edition, it specifies only the types of structural model generation rather than the type of structural system. So, before resolving the warning, let us understand the structural systems that STAT offers us.

There are four structural systems that STAT offers us. The four being space, plane, frame, and truss. All these four systems are differentiated with the help of these four points. The geometry, the loading, the deformation that is caused because of the loading, and the joints or nodes. So, as the name suggests, a space has its geometry in three dimensions. It can be X, Y, and Z planes. And since the geometry is spread along the three dimensions, the loading can also be in the three dimensions, and accordingly, the deformation will also be in all three planes.

And any kind of restrain can be given to the model that is assigned as space. When you go for a plane, the geometry is majorly in two dimensions. Accordingly, the loading and deformation are also in the 2D plane, that is, mostly X and Y planes. And any type of joints can be assigned here in the plane structural system. The next is the frame, and it is again two-dimensional in nature. The only change is that the loading is perpendicular to X and Z. And accordingly, the deformation is also perpendicular.

Again, here, any kind of joints can be assigned to the frame structural system. The next is truss. We all know that the geometry of the truss can be in any direction. The truss can take only axial load, and it cannot have any bending or shear. So the geometry, loading, and deformation can all be in all three planes. But when it comes to a joint or restraint, it can only take a pinned restraint, wherein the translational movement is the restricted one, but the moment is released. So while we are discussing this structural system, let us go back to the model first.

The command file showed me an instability at the joint. This being a single member, I want stat to take it as the two-dimensional element. So I am changing the space to plane. And I am saving it. And I am re-running the analysis. As you see, my warnings have been rectified. Now, let me go to the post-processing node. I have just one load case applied here. So I am using it the same, and I want to view the results. When I go to the post-processing results tab, we can view the displacement undergone by the beam.

video, let me go to the post-processing node, what is Denton? Let me show you the analysis. Thank you. We can see the shear force and we can see the moment. So, to make it visually more viewable, let us go to the scales. Let me change these scales first to make it easier for us to understand. Okay? So here I can see the displacement of my beam, I can see the movement and the shear force. Now, it just displays the moment diagram. What if I want to see how it is spread and its value? I want to annotate. I want to select ends and maximum. And I am going to select this. And I am going to annotate. Now it represents the diagram along with the value. I can choose one by one. I can take a picture and I can use it in my model. So, this is my shear variation and this is my moment variation.

So, with this, we can view the diagram as well as the value. We can also display it in the form of a graph. You see, this gives us the values at various locations. So, in this session, we discussed the basic steps of creating a model. We assigned the properties. We assigned the support and went for the loading. We saw the very various analysis types and that StatPro offers us. And we discussed the issue of structural system and how it affects the analysis report. When we went for the design, we understood how to display the moment, how to display the shear force and how to extract the values from the software.

So, once we get all the results from the Post Processing tab, the next step is to design the beam. So, since it is a concrete, I am selecting concrete here. I am going for the Indian code and I am going to select the parameters. By default, it includes all the parameters here. Now, let us go to the Define Parameters tab. There, we will select the parameters which we require. This clear parameter allows us to specify clear cover to the outermost reinforcement. We all know this general recommendation is 30. We can also change it to 25 mm since it is a beam and I am going to add it.

This CLB and CLT can be specified if I want to give a separate clear cover specification to the top and bottom reinforcement. CLT is a clear cover to the outermost top and CLB is the outermost bottom. Now, coming to the Depth. If at all, I want to specify a limiting depth to the structural element. They have already assigned a property to the beam here, which is considered for analysis. But when doing the design, STAD assumes a different section based upon the loading wherein I want STAD to consider a limiting depth.

I can go here. I can specify. Consider a slab. Consider a beam. Or a slab with a depth of only 500 mm. And don't go beyond. I can go and specify here. If I want to specify a limiting depth, I can use the width option and I can give a limiting width to the structural element that STAD is going to decide. The most important parameter to specify is the compressive strength of concrete. I am giving it 25 and add the F5 main and secondary as the compressive or yield strength of steel.

For the main and the secondary reinforcement, the maximum main and secondary allow me to specify what kind of diameter I am going to use. Let me specify it as 16. And similarly, you can specify the reinforcement diameter of the secondary reinforcement. And similarly, the minimum main and the minimum secondary can be specified. The next important thing we normally use is the unsupported length in the Y and Z direction, which is mainly used for the column design. It's all our specified parameters that are to be included in the design of the beam.

So, I am selecting this to view. Now, I am assigning all my parameters. Now, I go to the command. I want the element to be designed as a beam. I specify here. Design it as a beam. And now, I am re-running the analysis. We have zero errors, zero warnings and zero notes. This is what post-processing is. So, we have already discussed the beam results. Now, let us double-click the beam. Here again, you can view the loading, you can view the bending moment and you can view the displacement according to the design.

This represents the longitudinal and the cross-sectional view of the beam with the design reinforcement. So, it has considered eight twelve number bars for the bottom and the top. If you want any other different kind of reinforcement, then go to the design parameter tab. Select the maximum mean and secondary reinforcement and accordingly specify the bar diameter. As we discussed before, we have an inbuilt processor which does the reinforced concrete design. We will be discussing it in further sessions. As of now, it is decided using the tab here and we can see the approximate reinforcement quantity required for the beam for a given loading.

We can also see the design in the output file in the form of a tabular column. As you see here, it specifies the top and bottom reinforcement. It specifies the shear reinforcement in the form of a table. So, this is a basic design. Which can be done before finalizing the property, that is the sectional property of the structural element. Using this design tab, you can understand whether the given property or the size is sufficient. You can understand whether the rough reinforcement area is required. And we can further modify or go to the next stage of design.

With this, we conclude session 3. In the next session, we will be discussing the design basis report of a project. Thank you.

Want the rest of Analysis and Design of Buildings using STAAD.Pro - A Professional Approach?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Analysis and Design of Buildings using STAAD.Pro - A Professional Approach course

The remaining 47 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Analysis and Design of Buildings using STAAD.Pro - A Professional Approach course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.