Lesson finished
Up next: STAAD.Pro Analysis Types, Structural Systems and Beam Design
Unlock all 50 lessons of Analysis and Design of Buildings using STAAD.Pro - A Professional ApproachFull course ₹40,000 · paid
STAAD.Pro Material Assignment, Supports and Global and Local Axes
A free lesson from Skill-Lync's Analysis and Design of Buildings using STAAD.Pro - A Professional Approach course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Analysis and Design of Structures Using STAAD Pro”
What will you learn in this free Analysis and Design of Buildings using STAAD.Pro - A Professional Approach lesson?
The instructor builds a 6 m beam with a 230 by 230 mm concrete section and explains supports as restraints on six degrees of freedom: fixed, pinned, roller, enforced, spring and inclined. The lesson then contrasts global and local axes, showing how a beta angle of 90 degrees changes the direction of a local Y load.
- Assigning concrete to a 230 by 230 mm section
- Six degrees of freedom and support types
- Fixed, pinned, roller, enforced and spring supports
- Global axes, local axes and the beta angle
What comes after lesson 2?
The next free lesson is lesson 3, “STAAD.Pro Analysis Types, Structural Systems and Beam Design” (19 min). Later in Skill-Lync's Analysis and Design of Buildings using STAAD.Pro - A Professional Approach course (paid): lesson 4, Analysis and Design Structure Using STAAD.Pro; lesson 5, Design Flow Chart and Individual Member Design in Staad Pro; lesson 6, Designing a Reinforced Column Using Stat Pro. The full course has 50 lessons (17 h 36 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Welcome back to session 2 on the analysis and design of structures using STAT Pro. In the previous session, we discussed the basics of STAT Pro software. We went through the interface that comes along with the software. We discussed the different menu on the taskbar and the ribbon tab attached with each menu. And we also discussed the sequential way in which the menu is arranged in the software. We discussed how to create structural models and how to assign the unit systems before starting any structural model. In this session, let us go further and discuss the material specifications and the support condition assignments using STAT software.
Now, let us go over to the software. We have assigned analytical modeling and the unit system as metric. Now, here we are in the interface window. Now, let us create a beam, say a beam of span 6 meters. Now, as you see, here are two tables. One is for the node and the other is for the beam. My node 1 starts at 0. When I select node 1 here, see it is getting highlighted, and node 2 which ends at 6 meter in the x direction. When we extend from node 1 to node 2 to look at the nodal numbers here, you can press SHIFT plus N and also, I can select and right click and display here node number.
See, it shows me node 1 and node 2. Now, if I hover over the beam, you see here, there is a color variation which represents the start and the end of the beam. As here, the node 1 is starting which is displayed in green color. So, the green represents the start of the beam and the blue color represents where the beam ends. Now, to create a geometry, I go to the Properties tab and define a rectangular section of 230 by 230 mm. I have specified, I am specifying their concrete and now assigning it to the material.
We discussed earlier that STAD offers us a multi-material design. You can see here, it is quite evident. It has certain inbuilt materials which has material properties of that particular material. They have concrete, they have aluminum, they have steel. All these materials have already been induced in the software with their respective material properties. So, here, I have specified concrete in the Properties tab itself. So, we select concrete. It is getting highlighted. It means that the way which we have created has been assigned a material of concrete. We will come to the Specification tab a little later.
Now, let us move on to Supports. As you see here, I can create all the Supports. You see? Let us understand what is a Support first. A Support is nothing but a Restrain. A Restrain that is given at any particular point or node. And when we talk about Restrain, we have to understand the different degrees of freedom which determines the way a Support is going to behave. For example, this is my X, Y and Z plane. This is my coordinate system and I have a small node or a small particle here. This might move or can move in the X direction. It can go along Y direction. It can go along the Z direction.
All these movements are the translational movement which are described by terms Fx, Fy and Fz. As it moves along this direction which is referred as translational movement, it can also rotate along this axis. It can rotate here, be it that way or along Z. So, all these three movements are called rotational movements. So, that is how we define the degrees of freedom. Let us go to the software. So, support is a fixity or it is a Restrain given at a point. The Restrain in turn is categorized by the degree of freedom, three degrees of freedom as the translational movement and other three as rotational movement.
So, coming to the fixed menu or fixed support, it is support wherein all the translational movement and our rotational movement are restrained. As you see here, all this Fx, Fy, Fz, Mx, My and Mz are restrained. It is not going to change. Just select fixed, just select fixed, add it and you assign it to the support where you want the Restrain to be fixed and then comes the Pinned. In Pinned, we all know the movement is released. So, all my translational movements are restrained and all my rotational movements are released.
See, my Mx, My and Mz are released here. This again is the standard support condition. But if we want to create a roller support, I go here. I go to the fixed, but say for example, my roller is in the horizontal direction. That is a horizontal roller support. I have to release my Fx and Mz. So, I go here. I release my Fx and Mz and I leave all other as such. And I can create a roller support. Now, if you go to the enforced, but using this, also I can create a roller support. I can just release Fx and Fz and I create a roller support.
What is the difference between this enforced, but and fixed but? I allow you to define the spring constant for the particular support. Next is the enforced. As you see here, both fixed and enforced give you the same set of options. Even in the enforced, as similar to the fixed support, all my translational and rotational movements are restrained. But what makes it different from the fixed? Enforced allows you to assign a support displacement load if at all I want a node or join to act like a fixed node with restraining all my movements. But I still want the support to displace a minimum.
I can go for the enforced. I can click the enforced. I can specify the support as enforced. I can go back and I can see how to define. I can go back to the loading. Add all load cases to none. As you see here, on my nodal load, there is a separate window for support displacement. So once I specify my node as enforced, I can give the support displacement and how much it can displace using this tag. So I just go back to the supports. Okay, so that is a major difference between the fixed and enforced and fixed but and enforced but.
Next is multilinear spring wherein we can specify the spring stiffness coefficient with respect to displacement. This is mainly whenever we assign the support a spring and next comes the foundation tab where it is used to create and design foundations. Though we have a separate tab here. I mean we have inbuilt processor which helps you to create the design and detailing or foundation. I'll be using this rather than giving the assignments here. So, let us move on to the next tab which is inclined. A little earlier, we saw the definition of horizontal roller support.
Now, what if the same roller is inclined or the member orientation is inclined? Now, we want the support assignment also to be inclined or aligned to the member. So, that is when this inclined option helps us. It helps to specify the coordinate or specify the reference join or node and then you go for the support assignment. All the support available here is also incorporated in the inclined tab. You can either go for pinned or fixed or fixed but. So, the main difference is from the normal assignment of the support here and in the tab given here specifying the inclination of the number of the member, the orientation of the member changes and accordingly the support can be aligned or make it in a line with the member.
Next is the tension or compression only springs. For this to choose, we have to assign this. Let us see what this node tells us. The support requires earlier assignment of a spring support to the node. Once you assign the support springs, we can specify whether it is tension only or compression only springs. This is mainly used in one such example of using this tension or compression only springs in a tunnel where the concrete surface is surrounded by a rock, rock which majorly exerts or acts like a spring over the concrete tunnel.
This is the support conditions which StatPro offers us. Now let me go for pinned support wherein the rotational movement are released and I am going to add it. Now let me use my cursor to assign it. Either use this function or you want to assign to edit list and specify that my node 1 and 2 are going to be the main supports. So we are specifying these conditions here. Now before going to the loading, let us discuss about the coordinate system. As you see here, this represents the global axis of the software and over to the PowerPoint now. So we saw the material specifications. We saw the support conditions that Stat offers us.
Now before entering into the loading, let us understand the axis. This is the global axis which is fixed, irrespective of your member orientation, irrespective of your building orientation itself. The global axis remains the same that is not variable and the horizontal being the X and the vertical being Y and the lateral being Z. Now coming to the local axis, the local axis in StatPro is obviously variable and it depends upon how a member is oriented and in which the local X as you see here, the local X is always in the longitudinal axis.
Only the local Y and local Z vary, but local X remains the same, which runs along the longitudinal axis of a member. Y is considering the global local axis important. We'll see that right now with the help of a software, now in the load case, let me add, I have a load of 10 in my local axis. Let me assign it to the view. Let's see, it has already been assigned, but to make it more visually understandable, let us go and change the scales. See, now I want my load to act downwards, but since I have specified a positive integer here and my local Y is upward in nature, the load has been applied in the upward direction.
So to make it act downward, let me specify it as minus. Now, see this tab represents the global axis. Now I want to know how my local axis is represented here. Go to the labels and I select beam orientation or I select shift plus O and apply it. The blue one represents my local X. It is aligned along the longitudinal axis of my element. The red one represents my local Y and the green represents my local Z. Now, let us go to the specifications tab. Let me go for the beam.
Sorry, let me just go for the properties. Let me create an angle of 90 degrees. So once I specify my beta angle as 90 degrees, we just watch how many local axis is going to vary. Okay, let me zoom it further. Now, let me assign this beta angle of 90 degrees to the B. You see my local X remains the same. My local Y and Z now vary. Now, let me go back to the loading. Since I changed the beta angle to 90 degrees, the load which I applied in the local direction also got varied.
So this is where our member orientation, understanding the member orientation, understanding where the beam starts and ends helps. So, whenever in doubt, either press Shift plus O or you go to the labels and select the beam orientation and see how many local Y and Z is located or oriented and accordingly, you give the loading here. Here, I can either go for my global Y now. I have changed my loading to global Y. So, irrespective of where my member orientation is, my load will be acting in the Y direction downwards.
As to say, opposed to being in the upward direction and specify negative, it is going to be downward. Now, let me go back and change my beta angle. Even if I changed my beta angle, since my loading is in the global Y direction, it is not changing. Only, it is in the local Y direction. Only if I specified here, as local, we have to consider the beam orientation for each and every member. So, wherever possible, we will be applying through the global axis only. But for certain loads and for certain conditions, we will be specifying it in local direction.
So, whenever we go for the local Y direction in our loading, just ensure that the orientation of the member is aligned with the loading so that it reflects the natural exact condition. It helps you to analyze it further. So, with this, we come to the end of the session 2. We discussed about a simple geometry creation of beam. We discussed about the node table and beam table. We discussed how to assign material from the standard set of materials available in the software. We discussed about the supports.
Support again is nothing but a restraint provided at a point which in turn is governed by the six degrees of freedom. 3 as translational movement. 3 as rotational movement. And while once you understand the degrees of freedom and how a support is behaving, we can easily go and create a support here with the help of all these options. You select or you choose the support you want and you go for it. You assign it to the beam and before going to the loading or once after assigning the loading, you understand how a beam is oriented where you want to change the beta angle through which you change the orientation of the beam itself.
So, to understand the orientation of the beam, we have to understand the global axis which is fixed and the local axis with which the local y and z vary as per beta angle or the orientation of the beam. So, with this, we come to the end of session 2. In our next session, we'll be discussing further into the details about the interface of the software, wherein dealing with the next step of analyzing and building, and how to give the analysis command, and what are all the post-processing options that the software allows us.
We'll also be detailing or going through the design parameters that has to be involved in the design of reinforced concrete structure. So, let us discuss further details in session 3. Thank you.