Lesson finished
Up next: STAAD.Pro Material Assignment, Supports and Global and Local Axes
Unlock all 50 lessons of Analysis and Design of Buildings using STAAD.Pro - A Professional ApproachFull course ₹40,000 · paid
STAAD.Pro Interface Tour: Menus, Model Types and Command File
A free lesson from Skill-Lync's Analysis and Design of Buildings using STAAD.Pro - A Professional Approach course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Analysis and Design of Structures using STAAD Pro”
What will you learn in this free Analysis and Design of Buildings using STAAD.Pro - A Professional Approach lesson?
The instructor outlines a four-session software basics module, then tours STAAD.Pro, including the Open, Archive and New menus, job info fields, analytical, physical and building planner models, and metric units. The lesson explains how the ribbon tabs follow the modelling sequence and what the structure wizard, command file editor and unit converter do.
- Creating a new model with job information
- Analytical, physical and building planner model types
- Ribbon tabs from geometry through to design
- Command file editor and unit converter
What comes after lesson 1?
The next free lesson is lesson 2, “STAAD.Pro Material Assignment, Supports and Global and Local Axes” (19 min). Later in Skill-Lync's Analysis and Design of Buildings using STAAD.Pro - A Professional Approach course (paid): lesson 4, Analysis and Design Structure Using STAAD.Pro; lesson 5, Design Flow Chart and Individual Member Design in Staad Pro; lesson 6, Designing a Reinforced Column Using Stat Pro. The full course has 50 lessons (17 h 36 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Welcome to the lecture on the Analysis and Design of Structures using STAT Pro. In this module, we'll be completely discussing the basics of software. This module is divided into four sessions, wherein each session will be dedicated to the software basics. In session 1, we'll be discussing STAT Pro and the interface of STAT Pro. In session 2, we will go further into the interface of STAT Pro and we'll be discussing the assignment of material properties to a structural element and the support conditions to a joint. While discussing the support conditions, we'll be discussing namely the various kinds of support that the software offers us.
Further, we'll also be discussing the global and local coordinate system that is followed in STAT Pro. In the next session, we'll be discussing the next step in the process after creating a geometry, that is the analysis and post-processing options that the software offers us. While discussing the design, we'll be dealing with design parameters that are to be involved in the design of reinforced concrete buildings. Session 4 will be the last session on this module, wherein we'll be discussing and detailing about the design basis reports of a project and we'll be concluding the session with a summary.
Coming to the Learning Outcomes or Objectives. At the end of this module, I'm sure that the learner will be able to identify the different tools and icons and how it is represented in the interface of STAT Pro window. STAT software offers us many ways to create a structural model. All these types will be discussed and the learner will be able to understand which particular model type you use for which particular project or structure. As the interface of STAT Pro is discussed, we'll be able to assign a material property to elements and they'll understand how to give support conditions assigned to a joint.
While dealing with the design tab of the software, you'll be coming across different design parameters that the STAT Pro offers us and which one to include. And once after including the design parameter in the model, you'll be adopting the values and assign it to a structural model. The final part of the session in the module, we'll be creating a DBR. DBR forms the basis for any project. That is the first step we have to create and we'll be discussing and generating a design basis report for a sample project.
Now over to session 1. STAT Pro stands for Structural Analysis and Design Program. It was developed by Bentley Systems and it has a graphic user interface. This graphic user interface is laid out and formulated in such a way that it helps us to choose the different options based on the requirements, tools or the icons. The tabs are placed sequentially so that it is easy to create a model without missing any important step. Since this software is used mainly for analysis and design, whenever we are going to design a building or structure, we need to incorporate many complex calculations.
We need to consider first the type of structure, that is, it is going to be a truss or a normal building frame or is it going to have a composite element. So first of all, considering the materials for the structure or the type of structural element based on the material used, the design considerations for the system varies. The next important consideration in carrying out the design is the geographical location of the building. You need to consider where exactly the building is located. Whether it's in a sesame prone zone.
If it is a high-rise building and it is an open area, then the wind load will be the governing case. So, you have to do the calculation based upon the material, based upon the structural element and based upon the geographical location of the building. So, all these considerations might involve many complex calculations. These complex calculations were made easier with the help of this TADPRO software. Because, it has incorporated and included various design codes, be it Indian code, Euro code, be it ACI, all these design codes are already being implemented in the software.
Also, it has some predefined material properties installed in it. Which helps us. Just choose the property, choose the design code and you can run the analysis. Now, let's have a quick view of STAAD.Pro's interface. Let me open this software now. Once I open this STAAD.Pro window, this is going to be the landing page. On the left-hand corner, you see a menu. As the first one being opened. The Open menu gets you to open the model where we recently worked with. The function of the Open menu is to retrieve the already saved models from the system.
And, it is arranged in such a way that recently worked models will be displayed here. This is the new option, which we will come back to a little later. Now, let us go on to the Archive menu. Archive menu is to create a prototype model. For example, you want to create a model wherein you already entered the load case into the standard load cases. The standard load combinations and you save this as a template model. Or, you can also use this option to create a model in its different stages.
For example, if you are working for a G plus 20 building, you want to save the primary load cases in a separate one. You want to save this SESAMIC and WIND LOAD FACTOR model, you can use this Archive option to do that. And, the main thing of this Archive option is that the basic framework of this model or the structure can be saved separately. So that the basic model can be reworked later. It can be used for further analysis. We need to do a separate model so that the basic model remains the same and helps you to go and retrieve at any time later.
Next is the Share menu. Here, we can send our starred model through an email. Now, the Help menu. The Help menu has, as you see, the contents. This content is related to this StatPro software. You can see about any basic tools, why it is used, how it is used. You can see about the analysis options available. You can see what the command editor is going to give us. Any topic related to the software, related to design or geometry creation or analysis can be viewed here and can be used to understand the topic.
It has a wide variety of standard topics that can be displayed when you go for the online opens tab on the start page help. This license and configure has details of the license and about the current software we are using. Now, over to New menu. So, as the name suggests, the new menu is to create a new model. It has two tabs. One is model info and another one is job info. In the model info, it will ask to give file name and it is always a good practice to assign a proper name and a number to a file.
As most of the company follows or give a reference number or project number to a project. It is advisable to give the project number first or say, for example, I am giving the PC01 and to give a general description. Here, let me just make it an intro. But it is G plus 4 building and it is G plus 4 plus R. Just give the project number first. You enter that. It is a G plus 4 plus R. So that if we want to retrieve it or you want to rework on it or if some revision pops up, just go to the project number.
You type it and you can retrieve it easily using the menu option. Locations are asked to save the model current model that you are going to create now to be saved in your system. It will ask you which kind of structural model we want to create. Whether it is an analytical modeling, physical model or building model. Analytical modeling, as the name suggests, is used for analytical purpose. We mostly work in the analytical modeling type only and physical models help you to visualize how the building is going to react in the physical natural condition.
As we all know that a building can have... It can have many homogenous elements. It can have a steel element, it can have a concrete, it can have a composite, it can have a timber or any other element. Though it is made of homogenous elements, at the end of the day at the side, it is going to act like a monolithic structure. It is going to act like a single unit. So, this process is visualized using this physical modular in certain aspects when it comes to the further detailed analysis can be done easily in the single physical modular.
We can juggle between this analytical model and physical modeling while doing the model. The last one being the building planner. The building planner has some typical bay frames. It can be used if you have many typical floors, typical loading patterns, you can use the building planner options which makes the work easier. Next is the unit system. The unit system defines the type of unit we are going to follow for the model we are going to create now. Whether it is an FPI system or a SI unit system, we work better with the SI unit system.
So, let's select metric here. The next tab being job info, it is more like a title page of an A1 drawing or an engineering drawing. So, it is asking for a job name. So, let's name it the session intro. It is asking to give the client name. Let us use the same number which we used to create the file name. Revision. Revision asks you to specify and in actual practice, industrial practice. We all know that changes might crop up. So, this revision helps you to work out what revision is currently going on, whether it is RO or R1, whatever it is.
Once you enter the revision number here, you can go to the comments section and you can go into the details about the revision, who has raised the change request and how it is reflected in the current model. What changes have been done to the model, you can enter this in the comments section so that it is easy for future reference. You can enter any reference part here. And as similar to drawing, you can have the initials of the engineer, the one who is going to check the model and the one who is going to approve the model along with the date.
Now, let us go into the model info. We have given the name. This location is okay for me. I am going to use an analytical type with metric units. Though, I am specifying here English and metric, you can select either English or metric. StatPro allows you to change the units while creating the model. The units can change dynamically as and when required. For the basics, let me check the metric here. I am going to select Create. So, it creates a model with analytical modeling, based and a metric, based and a metric system.
Okay, now we have entered into the actual interface of StatPro. As you see, in the top, there is a taskbar where we have certain menus. Once we select each menu, there is a ribbon tab attached to it. So, I select Geometry here and the ribbon menu has menus that are associated with the geometry. Now, I go for View. The ribbon tabs change as per the menu. If I go to the loading, the tabs change dynamically. Since the ribbon tab is specified with the help of visual tools, it helps us to choose which one you want to go for, while creating the geometry or analyzing or designing a model or structure.
Again, we have a set of menus which specify the analytical modeling, physical and building planner. Once you have done the modeling, you go to the post-processing mode where we will be designing or taking out the results. Once the analysis is done, you go to the post-processing mode and you view the results. The results are displacement, shear force diagram, stress diagram. All the results are the outputs that can be viewed here. On these menus are StatPro built-in designers which are used to design an individual element. Like steel was used to design connections.
It has concrete designer and a slab designer. So, once we are done with the modeling, let's view the results. You go to any separate tab and you are going to design a structural element. Again, there is a menu here. Now, this basically means that which kind of model I am in. Since we have set up an analytical modeling, it is placed analytical modeling. Here, the set of menus spans from left to right. And so, if you follow the sequence, it is an arrangement where you follow the sequence and you go from left to right.
We are not going to miss any important step in the complete process. So, first, you go to the geometry you created. You assign properties. And assign the material that is going to be for the structural element. You give any specifications, any particular specific issues that you want the structural element. And then you assign the support. You go to the loading calculations. You apply the loading here and then you analyze the building. And once you analyze the building and take out the results, you go for the design.
And so, these tabs are arranged sequentially and helps us to carry out the process of model creation, analysis and design in a linear manner. So, again, to the taskbar where this geometry as you see, there is a grid system here. It helps us to create a beam using the beam grid and you can have a triangular plate or a normal four-edged plate or a solid. And each has a separate grid which helps us to create this structural element. And once we open the grid, we can go for the beam adding option and you can go for the add plate option accordingly.
And this structure wizard, it has some certain prototype models. As you see here, it has certain truss models, frame models. You can have plate dimensions. You use it, edit it a bit and can easily create a geometry. And all these options simply are going for a beam grid. See a grid in the XY plane. And all these options of transitional repeat and circular repeat helps us in creating a model in an easier way, in a faster way. In the geometry, we have an add plate and add solid which helps us to create each of the structural elements.
The view option has to view the building in parts or the complete structure also can be viewed using the display whole structure option. And this view helps to project the isometric view with a complete view of the top XY view or the bottom, whatever it is, can be selected using the menu here. The use of the select option is to select any particular element. If it is in the building, having many structural elements, you can select as per the requirement. For example, if I go for parallel to XY, all my elements that are parallel to XY would be selected.
And this helps me while assigning a property or assigning any particular specifications. This menu helps us in selecting the geometry or the structural element in an easier way. These specifications again will be discussed when doing the modeling. And the loading and analysis options, it gives you all the options that helps in getting that particular comment as you see here. When we discuss the multi-material design, as you see here, it has steel, has concrete, has aluminium and timber. So, you create the geometry first and go here and select which kind of material is going to be in the geometry and you run the analysis.
You will be getting the output. Utilities is mainly used to open the command file editor where we can change. Once you change the command, all the menu in the command file automatically gets reflected in your model. So that is where the command file helps us. It acts like a document or like a report of what you created here in the STAD interface. It would be reflected in the comment editor simultaneously. And it acts like a document or the documentation or the report of the model created here.
It shows us all the details. The command file will give you what kind of structure you have selected, what kind of loads have you given, the loads in each and everything that you do, a single thing you do in the STAD interface model. it It can automatically be reflected to the command file. This also has a unit converter, which helps us to convert the units then and there according to our requirements. And this helps you to take a picture. So, I open a model, I give all the loading and I can take a picture of the loading. And this particular command helps you to create a report where you can attach the command file editor with the documentation part and you can have a picture explaining the model visually.
So, these are the basic menu, which we'll be working on and the basic interface of StatPro window. With this, we come to the end of session 1. In our session 2, we will discuss further about the material specifications and the supports in detail. Thank you.