← Previous lessonFree lesson 2 of 4 · lesson 2 of 41Next lesson →

Unlock all 41 lessons of Advanced CFD for IC Engine Applications using CONVERGEFull course ₹40,000 · paid

Price & syllabus
Free lesson · 11 min · no payment

Course Overview: 12-Week Plan for IC Engine Simulation

A free lesson from Skill-Lync's Advanced CFD for IC Engine Applications using CONVERGE course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Advanced Internal Combustion Engine Simulations using Converge CFD”

What will you learn in this free Advanced CFD for IC Engine Applications using CONVERGE lesson?

The instructor outlines the 12-week plan: software setup and a 2D channel flow, surface preparation, theory and models, a port fuel injection project, restart and mapping, post-processing in ParaView, and a diesel piston comparison on a Caterpillar 3410 engine. The lesson also explains the support forums and help hours.

  • Software chain from CONVERGE Studio to ParaView
  • Week-by-week topics across the 12 weeks
  • Port fuel injection and diesel piston projects
  • Performance outputs such as CA 10 and CA 50

What comes after lesson 2?

The next free lesson is lesson 3, “Getting Started: Welcome Email, Licence Activation and Cygwin Setup” (25 min). Later in Skill-Lync's Advanced CFD for IC Engine Applications using CONVERGE course (paid): lesson 5, Setting Up and Simulating a Simple Flow Problem in Converge Studio; lesson 6, Laminar Flow Simulation Setup; lesson 7, Setting Up a Case in CONVERGE Version 3.2. The full course has 41 lessons (12 h 42 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Hey guys, welcome to the course on Advanced Internal Combustion Engine Simulations using ConvertCFD. My name is Sareng and I'm going to be the primary instructor for this course. This is an online 12-week project-based course. So first what I'm going to do is I'm going to be talking about the outline of the course, what you will be learning each and every week. And as and when I'm talking about that, I will be talking about what are your detailed learning outcomes, meaning after week one, what is it that you would be able to do and what are some things that you wouldn't be able to do.

I will be talking about projects and what type of assignments you would be working on and also about the support system that we have in place so that you can get answers to your question in a timely manner. So who should take this course and what do you think you'll be able to achieve at the end of it? Well, if you're someone who's currently an undergraduate student or if you're pursuing your master's and you want to learn more about advanced IC engine CFD, then this course is going to be very helpful.

By the end of this course, you will be able to gain familiarity with ConvertCFD. This is actually a popular computational fluid dynamics package that is used by top engine makers around the world. And you will be able to learn all the essential steps that an engineer typically needs to know in order to run an IC engine simulation. So that includes geometry cleanup. So when you have really complex geometry, how do you break it into pieces and how do you convert it into a form so that ConvertCFD can run simulations on it?

That is what geometry cleanup is. Then we will be talking about physical models and also computational mesh. And then we will be talking about mesh generation requirements. Now, mesh is something that's crucial for computation fluid dynamic applications. And one of the strengths of ConvertCFD is that it can create the mesh automatically on runtime and it can also refine the mesh based upon some solution variables using a technique called as the adaptive mesh refinement. After this, you will also be able to post-process engineering data from your simulations.

This includes a combination of single volume averaged or surface averaged outputs, line plots, and then 3D post-processing using ParaView. So in this course, we will be using several softwares. First, you will be using ConvertStudio as a preprocessor. Once you have used ConvertStudio, it will basically generate a bunch of files. These files represent your simulation. Right. Now, in order for you to be able to open these files, you can use a text editor or any other command line tools. In this course, we will be using something called a SIGWIN to basically open these files and to edit these files.

And once we are able to do this, we need to run the simulation. For this, you will be using a Converge executable. Right. All of this will be talked about in another video, but I just wanted to give you a heads up. So you will be given this executable. This executable cannot be launched by double clicking. It can be, but it's not very, you know, ideal to do so. So what you will be using is you will be using SIGWIN for this and you will use the command line interface of SIGWIN to launch the application.

Once the simulation is run, you will be able to use a software called Paraview to post-process the results so that you can understand the 3D data. And if you are making line plots, you will take the data from the simulation back to Convert Studio for making the line plots. All right. So that being said, let's talk about what you will be doing on week one. As I said, there are so many softwares that you need to download. So week one, what you will be doing is we will be downloading all the softwares and we will be helping you out with the installation as well.

Once you have downloaded all the pieces, you will be working on a simple 2D channel flow problem. The reason for doing this is to make sure that you have all the softwares in place so that you can go from A to Z without any issues. So once you have completed week one, we will jump to week two where we talk about advanced surface preparation concepts. Now, when I say advanced, we are not going to be starting from advanced concepts. You will be learning from the basics.

We will slowly build upon the difficulty layer, including more and more features so that you are extremely comfortable in cleaning up really complex geometries in Convert Studio. As part of learning surface preparation, you will be learning to simulate flow through an elbow with a rotating valve and also through a double barrel intake manifold. So around week three is when we start to discuss theory lectures. Now, don't get me wrong. The entire theory will not be covered in just one week. So as and when you are simulating problems, the essential theory is given then and there.

So just to give you some clarity, we have basically mentioned that all the theory is given in a single week. However, it's not going to be like this. You will see that these lectures are actually split across multiple weeks. But essentially what you are learning is you are learning how the flow solver in Converge works. What is the solution algorithm? In case of Converge, they use something called a PISO, which is a pressure velocity coupling method. How does that method work? Well, that is what you will be learning in the theory lectures.

And then in addition to this, you will be learning about some important physical models such as turbulence modeling, combustion modeling, spray modeling. Now, you need to understand that each of these topics is quite extensive and you can technically create like a six to 12 month course on just turbulence modeling or combustion modeling or spray modeling. Now, here, our main goal is to make sure that we can use these models for engineering applications. So what are the things that you need to know or what are the deciding factors that help you pick one model instead of the other model?

That is going to be the focus here. However, we still talk about the models in detail and we get you to a point so that you can run your own investigations in case you are interested in learning more about a particular model. So week four, we basically jump into slightly more advanced concepts. So here what we are learning is something called as regions and initializations. Essentially, what you are trying to do is you are creating volumetric zones so that you can supply specific conditions to it in terms of pressure and temperature or assign specific blitz strategies for that particular zone.

This is extremely useful in the context of an IC engine. So let me give a simple example. So you have the intake and you have the combustion chamber, correct? When the intake valve closes, these two chambers should be disconnected, right? Meaning there should not be any flow coming from the intake into the combustion chamber. However, from a simulation point of view, this is done by something called as an event. As the name suggests, the user can basically create an opening and a closing event so that when the intake valve opens, the intake and combustion chamber are connected.

Meaning flow can take place. And when the intake valve closes, there is another event which basically says that there should not be any flow taking place between these two regions. However, in order for this to work, you need to have these regions and that is what we will be focusing on. And for this, you will be performing flow. To understand the process of regions more clearly, you will be setting up a shock tube simulation in Converge. Around week 5 is when you start working on your initial project.

Now, your project title is going to be multidimensional simulation of a port fuel injection, right? But this is not the only simulation that you are going to be working on. In parallel to this, you will be also working on other simulations, okay? So, in this particular project, our aim is to simulate the entire four-stroke operation of an IC engine. So, you are simulating the intake, the compression process, the spark, the spray, the combustion and exhaust, right? So, you are simulating the entire four-strokes and you will be setting up the valve motion, you will be setting up the spray models and all that stuff.

So, this is a very comprehensive project. And in the first phase, you will be performing something called as a no-hydro simulation. So, here, you are not solving any CFD equations, you are just looking at the mesh motion preview. This is extremely important because in case of an IC engine, there are a lot of moving parts and the meshing process can be really challenging. And hence, to make sure that everything works okay, we are basically running a simulation where no CFD equations are being solved and that is what you call as no-hydro.

In this process, you can basically measure the volume of the combustion chamber from which you can measure the compression ratio. So, week 6, we will be talking about restarting and mapping. So, say that you are running a simulation and suddenly it crashes. Well, do you have to start the simulation from first? If yes, that's going to be a waste of time. Converge provides two handy features called as restart and mapping. With these two features, you can basically create checkpoint files which would be saved in your hard disk.

So, even if there is a power failure, you can actually start from the closest checkpoint file and you can run the simulation. So, during week 7, you are working more closely with the PFI engine. So, here you are setting up the initial and boundary conditions for this particular engine. You are setting up the Lagrangian fuel spray. You are setting up detailed chemical kinetics. And then, you will be running a 3D course combustion simulation. Week 8, we will teach you how to calculate performance parameters from a combustion simulation.

So, things like work done, combustion efficiency, how to look at CA 10, CA 50, how to calculate fuel consumption, how to calculate torque, how to calculate power. All these parameters would be covered during week 8. Week 9 is when your first project officially ends. So, here we will be talking about post-processing using ParaView primarily. However, we will also demonstrate another software called as Insight. So, at the end of week 9, you will be able to create pretty images and not only that, you will also be able to calculate engineering data from your simulations.

Week 10 to 12, you will be starting your second project. This is basically called as Emission Characterization on a Diesel Engine. So, for this project, you will be given a Caterpillar 3410 Diesel Engine which contains a reentrant type piston valve. Now, this is also called as the Omega Piston. In addition to this, you will also be taught how to create another famous piston architecture called as the OpenW. Your objective is to basically perform a piston valve swap study. So, the idea is very simple. You have the engine.

You basically run the simulation with your first piston. You get your performance data and emissions data. And then you repeat the same study with the second piston. Studies like this are commonly done in industries. And they are done with more than two or three piston configurations. This type of an exercise is extremely helpful because it kind of gives you an idea of what engineers in the real world are working on. And it also helps you understand how different geometry leads to different thermodynamic performance and emission results.

Now, during each week, you will be given some type of a simulation assignment. In this simulation assignments, you will be asked to run a lot of parametric studies. Now, don't worry, all these simulations will be able to run on your computer because they are fairly simplified. You need to make sure that you run these simulations perfectly and focus on getting the engineering data. Don't just focus on submitting the simulation. Look at the different outputs that Converge provides and see which of the output parameters can be useful from an engineering perspective.

This is extremely important for a good learning outcome. Now, we completely understand that as and when you are working on these challenges, you will have tons of questions. So, to help you out, we basically have online forums and we also have support hours where you can come in and ask questions. Regarding the course, regarding some theoretical concept or regarding the project that is given on the course, right? You can do screen share sessions with our technical support engineer so that we can answer the questions in a quick manner.

All right. With that, I would like to conclude this video and I'll see you in the next one. Bye.

Want the rest of Advanced CFD for IC Engine Applications using CONVERGE?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Advanced CFD for IC Engine Applications using CONVERGE course

The remaining 37 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Advanced CFD for IC Engine Applications using CONVERGE course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.