← Previous lessonFree lesson 2 of 3 · lesson 2 of 31Next lesson →

Unlock all 31 lessons of Additive manufacturing & 3D printing using Ansys SpaceClaimFull course ₹40,000 · paid

Price & syllabus
Free lesson · 10 min · no payment

SpaceClaim Navigation Controls and Sketch Basics

A free lesson from Skill-Lync's Additive manufacturing & 3D printing using Ansys SpaceClaim course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 2”

What will you learn in this free Additive manufacturing & 3D printing using Ansys SpaceClaim lesson?

The lesson shows the SpaceClaim workspace, its navigation key bindings and the axes indicator for setting views. It then starts a sketch with the K hotkey and draws a rectangle, circle and line with editable dimensions, plus undo and redo shortcuts.

  • Rotate, zoom and pan with mouse and keys
  • Aligning the view using the axes widget
  • Entering sketch mode and drawing basic shapes
  • Editing dimensions precisely, and using Ctrl+Z and Ctrl+Y

What comes after lesson 2?

The next free lesson is lesson 3, “Selecting and Editing Sketch Geometry in SpaceClaim” (8 min). Later in Skill-Lync's Additive manufacturing & 3D printing using Ansys SpaceClaim course (paid): lesson 4, Week 1 Session 4; lesson 5, Week 1 Session 5 Part 1; lesson 6, Week 1 Session 5 Part 2. The full course has 31 lessons (10 h 7 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

In this section, we'll be covering Ansys SpaceClaim as an overall overview. Before we get started, if you have any other experience with 3D modeling software, it is important to know that you can change the default navigation controls and key bindings to suit your preference. So, if you've used any other 3D modeling software before and you've become comfortable with the shortcuts and controls that you've used previously, you can assign the same navigation features and controls in Ansys SpaceClaim as well. So, you don't have to relearn everything that you've learned previously.

However, for the purpose of this course, we will present everything with the default key bindings in order for ease of following along. When you open a new project and answer SpaceClaim, you are greeted by a blank workspace environment. To find the options and preferences that I've mentioned previously, you go into File, up top over here, and you go down to this cog with SpaceClaim options. Once you click it, a dialog box will open with a list of different settings and features that you can view and edit.

If we go down to the Navigation tab, you can see that you have different key bindings and shortcuts for navigation and control. You can play around with these to suit your preferences. However, for the purpose of this course, as I've mentioned previously, we'll be using the default key bindings, which I will cover shortly. So, as I've mentioned, you have your blank workspace environment as demonstrated over here. If you want to look around and change your view, all you have to do is click and hold the middle mouse button and drag.

And as you do this, you can see you can rotate the workspace environment. If, however, you hold Ctrl, click middle mouse button, and drag, you zoom in and out of the workspace environment. If you hold Shift and middle mouse button, you can pan the workspace environment. If you look closely to the bottom left corner, you can see a set of axes. These change in real time to reflect the view that you are actually looking at. So, as I rotate the workspace, you can see that the axes move along to give me an accurate reflection of where I'm looking at.

If, however, you wish to set a specific view mode, you can actually interact with the set of axes. So, as a demonstration, if I click on the z-axis, it aligns me along the axis itself, perpendicular to the x-y-plane. Similarly, if I click on the y-axis, it orientates me along the y-axis, perpendicular to the z-x-plane. And the same for the x-axis. Now, you can see, as you hover over the axis, you get a circle highlighting all around the set of axes. If you click and drag this circle, you can rotate around the axis that you're looking at.

It is very important to get used to these navigation controls because as we create and view and edit 3D CAD models, it's very important to be able to quickly and effectively change the view and navigate to suit our needs. So, don't be scared to play around, get comfortable with the controls and the different views. Now, let's get on to actually creating a model. So, how do we go about this? Generally, if you think of a 3D model as an example, a cube, it all starts out with a 2D model.

So, to create a cube, we start with a square and give that square a depth, which turns it into a cube. So, how do we go about this? Pretty much, in essence, it all starts out with a sketch. Let's align our view along the z-axis, and this will give us a good starting point. First off, to begin a sketch, we need to be in sketch mode. As you can see, the hotkey for this is K. Most of the tools that we'll be covering have different hotkeys.

This helps out later on, if you learn these hotkeys, to improve your efficiency in creating and editing 3D models. However, don't worry about this. Get started off slow. Learn all the different modes, techniques, and tools. Play around with them, and speed will come with use and experience. So, back to it. Make sure you are in sketch mode. As you can see, over here on the ribbon, you have the mode and you have sketch. Under sketch, you have all the different tools that you can use to create your sketch.

And these are standard geometrical tools, such as line, rectangle, circles, different kinds of arcs, points, and whatnot. Let's start covering some of these. As an example, let's start with a rectangle. As an example, you click the tool, and then you click left mouse button and drag in the workspace to lay down geometry. As you can see, after we lay down geometry, it gives us different dimensions to this geometry. If you wish to click over here and edit it, you can. It's very flexible. So, if we don't want a 16mm side, and we want, for example, a specific dimensions of 10mm by 20, it's very easy to be precise and accurate in SpaceClaim.

What else do we have? We have a circle. So, we can create a circle on top of this layer, and you can see the main driving dimension for this is the circle diameter. So, if we click that, we can set the circle diameter to 20mm. Some other tools that we have is the line tool. Again, similarly, you can click and drag. So, we'll place your lines on the drawings. As you can see, SpaceClaim has different features. Obviously, it has the grid to help you sort of create geometry following a set of rules or guidelines.

It gives you different dimensions or properties between all the different lines and geometry you lay down. Sort of, as you can see, between this line that I've drawn over here and this line in the rectangle. It gives us, it tells us, SpaceClaim tells us that this is a 90 degree angle, and it gives us different dimensions over here. We'll learn later on in this course how we can edit and set these dimensions more accurately. For now, I'd like you to get more comfortable playing around with some of these different sketch tools, laying down geometry, and playing around to get used to the navigation and the drawing sketching interface.

Don't be afraid to play around, because SpaceClaim, it offers you a couple of shortcuts and keys that are common in many different programs. If you've used Microsoft Word or Excel in the past, you might be familiar with the undo and redo shortcut keys, which is control Z and control Y. This allows us to quickly undo and redo certain things. We do. So let's say we've accidentally drawn a line all over our sketch and we want to get rid of it. What you can simply do is click Control-Z and it will undo any changes that we've made.

If you actually did want to do that line over there, you can click Control-Y and this will redo any changes that we've made.

Want the rest of Additive manufacturing & 3D printing using Ansys SpaceClaim?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Additive manufacturing & 3D printing using Ansys SpaceClaim course

The remaining 28 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Additive manufacturing & 3D printing using Ansys SpaceClaim course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.