Wiring harness routing & packaging Rules Week 3 Challenge
REPORT
download the cad file of P clamp from te.com and open in catia.Its is used with wire connection where the wire is can be inserted both side from right to left and left to right.(1) in here we need to mark three parts- entry point and plane at one side centre and exit point and plane at centre of other side, base bottom plane.now openthe cad file in catia, now switch to part design workbench.mark the centre point(entry point) for one side as mentioned in picture(2).and create point on exit side as in (3). create plane at both points.(4) For base bottom plane, click the plane command and select offset from plane option and give 2mm as offset value, select the base in the part.(5) After this we have to define the electrical properties of given part.now switch to electrical part workbench. click the 'define support part' command in the right side. And click the part. Tab will open. IN the first plane definition, point is entry point and plane is entry plane. and second plane definition the plane is exit plane. and base plane definition is base plane. after that mark the entry exit properties from other side. click the same command and click the part, the tab will be open, the first plane definition the entry point and plane will be the exit values given above and second plane will be default and base plane is same as mentioned in picture(6).Clamp catalouge is created.
Tyco 1738312-1
download the cad file from te.com nad open in catia. open the part in part design workbench and mark the bindle entry point as showed in (7) and backshell point as showed in (8). Place the axis system in backshell point. the direction of axis is y-axis towards mating, z-axis towards top, x-axis towards left.(9). click the define back shell command and click the part(10). click the back shell connection command, tab open, fill the details as in (11).
Corrugated tubes
Open the electrical workbench. Select the command define protection part .Click on part workbody(green colour icon) fill the details such as inner diameter, thickness and bend radius - 1.5*outer diameter given in the challenge for five different outer diameter values. as in pictures and files attached.
Catalouge
open the file new catalouge document and create catalouge on Slit_COT family name as in pictures.