Wiring harness routing & packaging Rules Week 3 Challenge
Q1. Download following clip cad data & define it as Electrical support using Electrical Part design Workbench. Define all the necessary properties. Hellarmann Tyton – 21160129 process: Create two points one as entry and another as e
Wiring harness routing & packaging Rules Week 3 Challenge
Q1. Download following clip cad data & define it as Electrical support using Electrical Part design Workbench. Define all the necessary properties.
Hellarmann Tyton – 21160129
process:
Create two points one as entry and another as exit point.
create planes at two points and another at base.
Switch to Electric part desgn
Click on support defination - select part - select entry point - select entry plane, exit and base plane.
Again Click on support defination - select part - select exit point - select exit plane and base plane as secondary plane is automatically taken.
Q2. Download following Back shell cad data & define it as Electrical back shell using Electrical Part design Workbench. Define all the necessary properties.
Tyco 1738312-1 https://www.te.com/usa-en/product-1738312-1.html
Process:
create Back shell entry point.
create axis system for back shell entry.
create bundle connection point.
switch to Electrical part design.
Define part electricaly as back shell.
Then define Back shell connection point.
Define bundle connection point.
Q3. Create Following Corrugated tubes & Add them in Catalogue under “Slit COT” family.
Name
ID (mm)
OD (mm)
Thickness (mm)
15mm COT
12
15
1.5
20mm COT
17
20
1.5
35mm COT
32
35
1.5
10mm COT
7
10
1.5
5mm COT
3
5
1
Process:
Switch to Electrical part design
Select Define protection Part
Click on part (on file name in specification tree)
Provide given parameters and bend radius as '1.5 x Outer Dia'.
Catalogue Cretation:
new part - catalogue document - add family - give name - type - s
elect Conduit - save.
Open part to add catalogue - store device command - select catalogue - family - Slit_cot_tube - ok