Wiring harness design in CATIA V5 - 3D modeling Week 5 & 6 Challenge

report

download the parts from the link. for harness b five connector parts. mark the electrical properties and catalouge document. open the product document and create new part where outline line sketch can be drawn to place the connectors. insert the connectors in the product document and do the routing process with diameter 15mm dia for main path and 10 and 5mm diameter for branch path. to check the bundle segment full connectivity go to edit and select the search and tab will be opened and in workbench column electrical is selected, for type- select bundle segment, attribute- fully connected, select true option and click search.

for hardness a all procedure above are followed. for part 7 two parts are needed one connector and one mounting clip and both of them are joined in assembly page using cavity connection electrical property. after routing process check the bundle connectivity using above procedure. open both assembly in separate product document and connect the part 5 and part 6. it can be done in another way that both document are inserted in separate product and after part 5 and part 6 are connected, routing is done with in hardness a parts. pictures are inserted.