Week 9 - Challenge 1 - Base Bracket Design

TOOLING AXIS - For the CLASS A surface created a Tooling Axis using Intersection method and Bisecting Lines.

Started with the Hole on the Base by creating a Point on its centre axis and making Dummy Tooling Axis and also creating an plane respect to yz plane;By using an Intersection method on Class A surface we got the intersevtion of the whole surface and creating two line on both edges using Line Definition point to point tool on the bisects; From both of those two line Bisects we got the proper TOOLING AXIS.

DRAFT ANALYSIS - From the CLASS A Surface and the Toolin Axis we need to check the weather the product can be manufactured or not by checking the degree of angle should be on the permissinle amount or not(3-7).

1 - From the customise view parameters we need to select the material option for the surface.

2 - select the draft analysis tool and select the draft direction and place the tool on the Tool Axis of the surface.

3 - after that lock the draft direction by lock tool on the draft analysis bialogue box and select the surface body from with we can the surface changes to the graan colour or to the Blue as per the values.

4 -by using Analysis under running point tool on the draft analysis we can ensure the angle of the specific locations on the surface. we can make sure the angles under manufacturing value.