Week-7 Challenge: DC Motor Control

      1.Prepare a table which includes materials & chemical reactions occurring at the anode and cathode of LCO, LMO, NCA, NMC, LFP and LTO type of lithium ion cells.Give your detailed explanation on it. TABLE CHEMICAL NAME CATHODE MATERAIL CHEMICAL REACTION CATHODE ANODE MATERIAL CHEMICAL REACTION ANODE…

Create a MATLAB model of electric car which uses a battery and a DC motor. Choose suitable blocks from Powertrain block set. Prepare a report about your model including following: Objectives: System level configurations Model parameters Results Conclusion Theory:-  An Electric vehicle is a veicle that uses one or…

Part A: Search and list out the total weight of various types of aircrafts. What Is Aircraft?       Any vehicle that is built and made to fly in the air is called an aircraft. While the airplane is the most well-known, familiar, and popular type of aircraft that we know of, other aircraft that…

1)Braking:-               Braking is the process of controlling the velocity of an object by inhibiting its motion.An object in motion possesses kinetic energy and to bring the object to a stop this kinetic energy must be removed.Removing the kinetic energy…

EV BATCH 17 2. Develop a 2-quadrant chopper using simulink & explain the working of the same with the relevant results. The Two-Quadrant chopper DC Drive(DC6) block represents a two quadrant, DC-supplied, chopper drive for dc motor. This drive feature closed-loop speed control with two quadrant operation. The speed…

 Power converters: Electric and hybrid electric vehicle, power converter is interface their power source to the drive train of the EV's in order to design highly efficient converters of the power system, advanced DC/DC and DC/AC converters are required to adopt the output voltage and current level  Types: AC/DC…

1.What is the difference between mapped and dynamic model of engine, motor and generator? How can you change model type. Mapped moter or Static model,   It work faster and driven based on lookup table Mpped motor and drive electronics operating in torque control mode specify Electrical torque range with torque speed…

AIM:     To prepare a technical report of a simulation of BAJA All-Terrain vechile (AVT) under different conditions. OBJECTIVE:     Carry out a system-level simulation of an all-terrain vechile and prepare a technical report explaining the model properties and comments on the results. ALL-TERRAIN…

Implement control logic of a “washing machine” using Stateflow as per given sequence:  If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking time should be 200s followed by Washing time of 100s. Then rinsing…

SIMULINK MODEL OF DOORBELL SOLENOID  SOLENOID:                A solenoid is a 3 dimensional of wire. When this wire is wrapped around a mettallic block in a call and electricity is passed through it, it has some special magnetic properties. Electromagnetic induction makes it…