Week 7 Challenge - Assembly Workbench
CV JOINT
1) CREATING THE BASE CIRCLE CYLINDER OF BODY 1 .
2) AFTER PAD THE BASE CYLINDER, CREATE NEXT CYLINDER THEN PAD IT LIKE SAME.
3) THEN ADDED THIS TWO PART THEN GIVEN THE FILLET AS PER.
4) THE FINAL OF BODY 1.
5) CREATED THE BODY 2 BASE ON SKETCH THEN PAD IT.
6)AFTER CREATE THE CIRCLE BLOCK IN SKETCH THEN PAD, SHELL , SYMMETRY IT AS PER REQUIREMENT.
7)HERE THE TWO PART ADDED BY TRIM AND REMOVED THE UNWANTED FACE.
8)GIVING THE FILLETS AS PER , THE FINAL OF BODY 2
10)CREATING THE BODY 3 BASE CIRCLE ON SKETCH AND PADDED AS THICKNESS.
11) THEN CREATING THE SKETCH OF LINK AND SYMMETRY IT THEN PADDED.
12)REMOVING THE UNWANTED FACE USING TRIM.
13)CREATING THE LINKED CIRCLES IN SKETCH.
14)PAD THE CIRCLE , THEN SHELL AS PER REQUIRES AND SYMMETRY IT.
15)AFTER TRIM AND FILLET , FINAL OF BODY 3
16)OPEN THE PRODUCT WORKBENCH THEN COPY PASTE ALL BODYS.
17)GIVING THE ALL REFERENCE TO EACH BODY WITH PUBLICATION, THEN USE CONSTRAINTS TO REMAIN ASSEMBLY.
18) COPY PASTE THE BODY USE MORE THAN ONE TIME THEN ALSO USE CONSTRAINTS TO ASSEMBLE THEM.
19) THE FINAL OF CV JOINT.
QUICK RETURN MECHANISM
1) CREATE THE BODY 1 BASE ON SKETCH, THEN PAD AS THICKNESS.
2) ADDED THE ATTACHMENT ON SKETCH, THEN PAD IT LIKE SAME.
3)GIVEN THE EDGE FILLET AS PER DRAWING. THE FINAL OF BODY 1.
4) CREATING THE SECOND BODY ON SKETCH , THEN SHAFT IT.
5) THE FINAL OF BODY 2.
6)CREATING THE BODY 3 BASE ON SKETCH , THEN PAD IT.
7) THEN THE CYLINDER PART SAME AS PAD AFTER SKETCH.
8)ADD THIS TWO PART. THE FINAL OF BODY 3.
9)CREATED THE BODY 4 BSE AND PAD IT.
10) CREATED THE ATTACHED CYLINDER THEN PAD.
11)ADD THE TWO PART . THE FINAL OF BODY 4.
12)CREATED THE BODY 5 USING PAD THE SKETCH.
13) FINAL BODY 5.
14)OPEN THE PRODUCT WORKBENCH AND COPY PASTE ALL THE BODY. THEN GIVEN THE REFERENCE AND CREATED PUBLICATION OF EACH.
15) USING CONSTRAINTS ASSEMBLED THE PRODUCT AS PER GIVEN. THE FINAL OF QUICK RETURN MECHANISM.
# ALL THE PART OF BOTH CHALLENGE ARE ATTACHED IN THE ZIP FILE BELOW
#THE PRODUCT AND DRAWING OF EACH PART AND ASSEMBLY ARE ALSO ATTACHED IN THE SAME ZIP FILE.