Week 7 Challenge - Assembly Workbench

CV JOINTS AND QUICK RETURN MECHANISM

PROCERURE

• CHILD PART BODY CREATION
• INSERT THE PART BODY INTO ASSEMBLY WORKBENCH
• PUBLICATION
• CONSTRAINT

PART BODY CREATION

• OPEN THE PART WORKBENCH
• DEFINE THE PLANE AND PROJECTION POINT FOR THE SKETCHER WORKBENCK
• DRAW THE SKETCH FOR THE CHILD PART AS PER THE GIVEN DIMENSION
• CHECH THE ISOCONSTRAINT STATE
• THEN SELECT EXIT WORKBENCH COMMEND
• USE PAD OR MULTIPAD AND OTHER COMMANDS TO CHANGE THE SKETCH INTO PART BODY
• SAVE IT.AND CREATE THE ALL OTHER CHILD PART BODY AS PER THE ABOVE PROCEDURE

ASSEMBLY WORKBENCH

INSERT THE PARTBODY

• ALL THE CREATED PART BODY IS TO INSERTED INTO THE ASSEMBLY WORKBENCH
• THERE ARE 2TYPES
• EXCISTING COMPONENT COMMAND AND COPY PASTE METHOD
• FOR USING COPY PASTE METHOD ALL THE CHILD PART BODY WILL BE OPENED IN THE BACKGROUND
• COPY THE CHILD PART BODY AND PASTE IN ASSEMBLY BENCH DEFINITION
• USE CONTROL TAP TO SHORTCUT VIEW

PUBLICATION

• ALL THE PART BODY HAVE REFERENCE POINT AND REFERENCE AXIS
• PUBLICATION THE ALL PART BODY REFERENCE POINT AND REFERENCE AXIS IT IS EASY TO ASSEMBLE

CONSTRAINT

• COINSIDE THE CHILD PART BODY AXIS TO GET THE CHILD PART BODY INTO THE SAME AXIS DIRECTION
• AND COINSIDE THE REFERENCE POINT TO ASSEMBLE THE CHILD PART
• USE MANIPULATION COMMAND TO ADJUST THE POSITION OF CHILD ASSEMBLED PART BODIES
• FOLLOW THESE PROCEDURE TO ASSEMBLE THE MAIN PART BODY
• AFTER THE ASSEMBLE OF MAIN PART BODY CREATE THE 2D DRAWING FOR ASSEMBLED PART BODY THROUGH THE DRAFTING WORKBENCK