MESHING OF HOOD USING HYPERMESH

MESHING OF HOOD

OBJECTIVE: Meshing of Hood using HYPERMESH

PROCEDURE:

1.IMPORTING CAD MODEL: Importing CAD model using Import Model Option

2.EXTRACTING MID SURFACE: We have to extract individual midsurface for all given components, By Using Midsurface command from Geometry Extract the Midsurface for all components.

3.ASSIGNING QUALITY CRITERIA: As per the given requirements we have to assign those parameters using Tool command

4.MESHING OF COMPONENTS: Mesh all components as per the given requirements and start working on individual components to give proper mesh using quick edit tools.

5.QUALITY INDEX CHECKEKUP AND ELEMENT CLEANUP:Using the Quality index tool in 2D we have to check for our elements quality.

The tools like Element Optimize, Drag Tria, Smooth, Place Node, Combine Tria Element etc. We have to reach our best Quality mesh for each component

6.ASSIGNING PROPERTY-THICKNESS AND MATERIAL: First we have to create property called material and we have to give as STEEL, then we have to create another property called THICKNESS.

THICKNESS as 7.50and 1.2

7.5 mm thickness for Inner and Outer

1.2 mm Thickness for Latch and Hinge

CONCLUSION:

For given model we extracted Midsurface and Using Given Parameters and quality criteria we have meshed the Hood and checked the quality criteria successfully.

GOOGLE DRIVE LINK:https://drive.google.com/file/d/1gofRKNPPjSD3AUmVIOLqImfpsIeoU16k/view?usp=sharing