Week 3-Meshing of Hood Challenge
I SEND LINK IN MODEL MESH FILE
https://drive.google.com/file/d/1w-s5Cydfo5UtM4mQVSiUB6q3fP15XqMc/view?usp=sharing
AIM
Follow the below-mentioned quality criteria, mesh the component given below and assign thickness:
Target Element Length = 5 Units
| S.N | Quality Criteria | Value |
| 1 | Aspect Ratio | 5 |
| 2 | Skewness | 45 |
| 3 | Warping | 15 |
| 4 | Taper | 0.5 |
| 5 | Min. Length | 2 Units |
| 6 | Max. Length | 8 Units |
| 7 | Min angle Quad | 45 |
| 8 | Max angle Quad | 135 |
| 9 | Min angle Tria | 20 |
| 10 | Max angle Tria | 120 |
| 10 | Tria % | 10 |
- To extract Mid surface and generate mesh on Hood using Hyper mesh
Mid surface is extracted for all the components as shown below
Latch mid-surface
then the process of put qility cretria and apply the mesh
https://drive.google.com/file/d/1w-s5Cydfo5UtM4mQVSiUB6q3fP15XqMc/view?usp=sharing