Week 3- Geometry cleanup and Mid-surfacing

Aim:- Geomertry cleanup and mid surfacing

Objective:- Case 1 :- To extract mid-surface for the tube model and provide a connection with sharing option at the tube joint locations

Case 2 :- Create a model in Spaceclaim one on top of each other and create a shared topology between the top block and the bottom block.

Procedure :-

1. Import a geometry in workspace claim, and clean the geometry with the help of respective tools

2. Extract a mid-surface of given geometry in this case it is a frame of square pipe,

3. After Extracting mid Surface, use pull option to the mid surface geometry edges, and use option up to , for define the targeted surface.

4. When all the edges connected with adjacent surfaces, use share option, to share the edges of mid surfces.

CASE 2:-

1. Use modal analysis option and open space claims option to made a geometry as per given data. Block A at the top (20x20X5mm) and Block B at the bottom (40x40x10mm).

2. Now go to Mechanical and mesh the given geometry with hex dominant method having 2mm mesh size, and linear type of mesh.

3. In solution analysis setting, use 10 modes for result.

Conclusion :- by using this method we successfully solve the problem