Week 11 - Project - A pillar Design with Master Section1

Week 11 - Project - A pillar Design with Master Section CHALLENGE :

In Tree Structure

• Ensure using the surface command.
• Use closed body command to create the solids
• Rename the geometrical set properly.

Output Required in a ppt :

• Picture of the sketches with Sketch solving status’s geometry tab
• Picture of the Detailed tree structure.
• Picture of the 3D CAD
• Create closed body 
• Create a tooling axis and follow design rules.
• Follow the Master section to create a flange
• Follow the master section for thickness and to create the Closed volume.
• Follow the master section to create Attachment featuresss
• The thickness of the Plastic to be 2.5 mm