Week 11:- 2D Detailing Challenge 2

Aim/ Objective:

1. Create 2D Drawing for each Clamp Units with all child parts and also create Child pard drawing for the same for the Fixture assembly created in challenge 8.

2. Create 2D Drawing for each Pin Units drawings with all child parts and also create Child pard drawing for the same for the Fixture assembly created in challenge 8.

 Answer:

2D drawing for each clamp unit with all child parts & 2D Drawing for each Pin Units with all child parts.

1. Detailing of clamp unit (P001_Z01_ST006_01_00_SWIVEL_CLAMP_UNIT)

• Below figure shows 2D drawing of clamp unit with child parts.

• Detailed drawing of rest mylar (P001_Z01_ST006_01_01_REST_MYLAR)

• Detailed drawing of clamp mylar (P001_Z01_ST006_01_02_CLAMP_MYLAR).

• Detailed drawing of clamp arm (P001_Z01_ST006_01_03_CLAMP_ARM).

• Detailed drawing of blade (P001_Z01_ST006_01_04_BLADE).

• Detailed drawing of riser (P001_Z01_ST006_01_05_RISER).

• Detailed drawing of stopper assembly (P001_Z01_ST006_01_08_STOPPER_ASSEMBLY).

• Detailed drawing of stopper male part (STOPPER_MALE_PART).

• Detailed drawing of stopper female part (STOPPER_FEMALE_PART).

2. Detailing of clamp unit (P001_Z01_ST006_02_00_SWIVEL_CLAMP_UNIT)

• Detailed drawing of rest mylar (P001_Z01_ST006_02_01_REST_MYLAR).

• Detailed drawing of rest mylar (P001_Z01_ST006_02_02_REST_MYLAR).

• Detailed drawing of clamp mylar (P001_Z01_ST006_02_03_CLAMP_MYLAR).

• Detailed drawing of clamp mylar (P001_Z01_ST006_02_04_CLAMP_MYLAR).

• Detailed drawing of clamp arm (P001_Z01_ST006_02_05_CLAMP_ARM).

• Detailed drawing of rest arm (P001_Z01_ST006_02_06_REST_ARM).

• Detailed drawing of blade (P001_Z01_ST006_02_07_BLADE).

• Detailed drawing of riser (P001_Z01_ST006_02_09_RISER).

3. Detailing of clamp unit (P001_Z01_ST006_03_00_PIN_CLAMP_UNIT)

• Detailed drawing of rest mylar (P001_Z01_ST006_03_01_REST_MYLAR).

• Detailed drawing of clamp mylar (P001_Z01_ST006_03_02_CLAMP_MYLAR).

• Detailed drawing of clamp arm (P001_Z01_ST006_03_03_CLAMP_ARM).

• Detailed drawing of blade (P001_Z01_ST006_03_04_BLADE).

• Detailed drawing of riser (P001_Z01_ST006_03_08_RISER).

• Detailed drawing of diamond pin (P001_Z01_ST006_03_09_DIAMOND_PIN).

• Detailed drawing of retainer (P001_Z01_ST006_03_10_RETAINER).

• Detailed drawing of shimming block (P001_Z01_ST006_03_11_SHIMMING_BLOCK).

4. Detailing of retractable pin unit (P001_Z01_ST006_08_00_RETRACTABLE_PIN_UNIT).

• Detailed drawing of diamond pin (P001_Z01_ST006_08_01_DIAMOND_PIN).

• Detailed drawing of retainer (P001_Z01_ST006_08_02_RETAINER).

• Detailed drawing of shimming block (P001_Z01_ST006_08_03_SHIMMING_BLOCK).

• Detailed drawing of mounting plate (P001_Z01_ST006_08_04_MOUNTING_PLATE).

• Detailed drawing of riser (P001_Z01_ST006_08_05_RISER).

5. Detailing of pin clamp unit (P001_Z01_ST006_09_00_PIN_CLAMP_UNIT).

• Detailed drawing of rest mylar (P001_Z01_ST006_09_01_REST_MYLAR).

• Detailed drawing of clamp mylar (P001_Z01_ST006_09_03_CLAMP_MYLAR).

• Detailed drawing of clamp arm (P001_Z01_ST006_09_05_CLAMP_ARM)

• Detailed drawing of rest arm (P001_Z01_ST006_09_06_REST_ARM).

• Detailed drawing of blade (P001_Z01_ST006_09_07_BLADE).

• Detailed drawing of round pin (P001_Z01_ST006_09_08_ROUND_PIN).

• Detailed drawing of riser (P001_Z01_ST006_09_09_RISER).

• Detailed drawing of pin retainer (P001_Z01_ST006_09_10_PIN_RETAINER).

• Detailed drawing of shimming block P001_Z01_ST006_09_11_SHIMMING_BLOCK).

6. Detailing of retractable pin unit (P001_Z01_ST006_10_00_RETRACTABLE_PIN_UNIT).

• Detailed drawing of diamond pin (P001_Z01_ST006_10_01_DIAMOND_PIN).

• Detailed drawing of retainer (P001_Z01_ST006_10_02_RETAINER).

• Detailed drawing of shimming block (P001_Z01_ST006_10_03_SHIMMING_BLOCK).

• Detailed drawing of mounting plate (P001_Z01_ST006_10_04_MOUNTING_PLATE).

• Detailed drawing of riser (P001_Z01_ST006_10_05_RISER).

7. Detailing of pin clamp unit (P001_Z01_ST006_11_00_PIN_CLAMP_UNIT).

• Detailed drawing of rest mylar (P001_Z01_ST006_11_01_REST_MYLAR).

• Detailed drawing of clamp mylar (P001_Z01_ST006_11_03_CLAMP_MYLAR).

• Detailed drawing of clamp arm (P001_Z01_ST006_11_05_CLAMP_ARM).

• Detailed drawing of rest arm (P001_Z01_ST006_11_06_REST_ARM).

• Detailed drawing of blade (P001_Z01_ST006_11_07_BLADE).

• Detailed drawing of round pin (P001_Z01_ST006_11_08_ROUND_PIN).

• Detailed drawing of riser (P001_Z01_ST006_11_09_RISER).

• Detailed drawing of pin retainer (P001_Z01_ST006_11_10_PIN_RETAINER).

• Detailed drawing of shimming block (P001_Z01_ST006_11_11_SHIMMING_BLOCK).

8. Detailing of swivel clamp unit (P001_Z01_ST006_12_00_SWIVEL_CLAMP_UNIT).

• Detailed drawing of rest mylar (P001_Z01_ST006_12_01_REST_MYLAR).

• Detailed drawing of rest mylar (P001_Z01_ST006_12_02_REST_MYLAR).

• Detailed drawing of clamp mylar (P001_Z01_ST006_12_03_CLAMP_MYLAR).

• Detailed drawing of clamp mylar (P001_Z01_ST006_12_04_CLAMP_MYLAR).

• Detailed drawing of clamp arm (P001_Z01_ST006_12_05_CLAMP_ARM).

• Detailed drawing of blade (P001_Z01_ST006_12_07_BLADE).

• Detailed drawing of riser (P001_Z01_ST006_12_09_L_TYPE_RISER).

• Detailed drawing of rest arm (P001_Z01_ST006_12_11_REST_ARM).

9. Detailing of pin clamp unit (P001_Z01_ST006_13_00_PIN_CLAMP_UNIT).

• Detailed drawing of rest mylar (P001_Z01_ST006_13_01_REST_MYLAR).

• Detailed drawing of clamp mylar (P001_Z01_ST006_13_03_CLAMP_MYLAR).

• Detailed drawing of clamp arm (P001_Z01_ST006_13_05_CLAMP_ARM).

• Detailed drawing of rest arm (P001_Z01_ST006_13_06_REST_ARM).

• Detailed drawing of blade (P001_Z01_ST006_13_07_BLADE).

• Detailed drawing of round pin (P001_Z01_ST006_13_08_ROUND_PIN).

• Detailed drawing of riser (P001_Z01_ST006_13_09_RISER).

• Detailed drawing of pin retainer (P001_Z01_ST006_13_10_PIN_RETAINER).

• Detailed drawing of shimming block (P001_Z01_ST006_13_11_SHIMMING_BLOCK).