Week 1 Challenge
1.
1.Open the STAAD pro software and locate the share option available on the introduction screen.
2.And then click on the share option and select the send mail option.
3.Finally browser of the .STD file on your machine and the send it.
2.
There are different materials that can be designed using STAAD pro
*STEEL
*CONCRETE
*ALUMINIUM
*TRIMBER
3.
Yes it is possible to capture images in STAAD pro.
*First open STAAD pro software.
*And then go to click on "utilities".
*Under utilities panel with a camera logo.
4.
The three ways to create a model in STAAD pro
* Analytical model
*Physical model
* Building planner model
5.
Go to click the properties commands .
Select on the material.
In this material command list on it .
Concerete, Steel, Aluminum,Steeless steel and etc.,
And then select on the assign method on using a assign to view on this properties.
And then checking the radio button and then go to assign material propertiesto your model.
2.
1.The six design parameter involved in RCC design;
*Clear cover.
*FC compressive strength of concrete.
*FY Tenstile Strength of the Steel.
*Max main Dia of bar.
*Code of practice.
*End concrete design.
2.
The different cursor types that are available in STAAD Pro are
*Node cursor.
*Plate cursor.
*Beam cursor.
*Plate and solid cursor.
*Loads cursor.
*Physical member cursor.
3.
First go to view option in the ribbon there and then a get option see like that
*Top view
*Isometric view
*Front view
*Left view
*Right view
*Bottom view
*Back view
4.
*Go to support commond on the tool pallet command.
*Click on create a support command.
*And then we can get option like a
*Fixed support
*Pin suport
*Fixed but
*Enforced but support
*Cable support
*Inclined support
5.
They are five topics that will include creating DBR is below :
*Name of the project and the location of the project.
*Structural layout
*Introduction to the construction methodology.
*Quality Assurance and quality control.
*Budget of the project.
6.
The term "Multi material design" of STAAD Pro defines as the Structure that is design by implementing more than one structural material.
*It is used to 3D model generation, analysis and multi material design.
*The STAAD Pro support several steel, concrete and timber material in a seperate member
3.
1.
The structure system in STAAD Pro software are :
*Space frames
*Plane frames
*Trusses
SPACE FRAMES
Space frames are the three dimensional truss like structures that is a designed to carry loads for span large areas and any intermediate support.the space frame structures are rigid and light weight in nature and it is structurally effective and then it has low transporatation cost.
PLANE FRAMES
Plane frames are the RCC or steel frames structure and There are two dimension structure which are the construction with straight element which are connected rigid or hinged connection.
TRUSSES
It is creating by the arranging a structure element in a triangle forms of take load in both compression and tension.
2.
The co-ordinate system are the adpoted in a STAAD Pro are the X,Y and Z .
1.Global Axis: Global axis is fixed with co-ordinate system.
2.Local Axis: Local axis is variable in nature. we can changed in local axis and but not a global axis.
3.
DBR
The DBR (Design Bass Report) to specify and compile the data required for analysis and design of structural element of the project. It clearly depicts the assumptions and specifications that are being used to develop the construction document for a project. It will also help avoid the "Scope creep" that can derail the project schedule and lead to budget overrums. It is biscally transform the "WHAT" into the "HOW"
4.
There are different types of analysis option in STAAD Pro software they are
1.Linear elastic analysis.
2.P-Delta analysis.
3.Buckling analysis.
4.Pushover anlysis.
5.
FIXED Condition:
In a STAAD Pro software the FIXED Condition are they condition all degree of freedom that is hortizonal and vertical are fixed and the condition are restrained we cannot changed. And this condition are fixed condition.
FIXED BUT Condition:
In a STAAD Pro software the Fixed but condition are this condition are customized its end conditions. this condition are changed in end condition and it is not restrained. And then can a release some freedom of degree.
PRACTICAL