Tool Test 1

Step 1- MODEL OPEN AND CHECK FOR COMPONENT.

Opened the given file in ANSA and check / review components / parts involved.

Step 2-PROPERTY AND MATERIAL

Check the property and material.

Step 3- TOPO AND CHECKED GEOMETRIC

Performed Topo And Checked geometric and fix the error

If few error are not fix by command / auto resolved the issue by manual method.

Step 4- STORE AND LOCK VIEW

By using store lock command store the view

Step 5- THICKNESS MEASUREMENT

By face measured the thickness @ multiple points and checked for color orientation.

Step 6- MID SURFACE.

Mid surface created using FACE – offset, middle ( single) tab and selected the part and provided the thickness and keep the parent surface as it and mid surface created.

Step 7- SET PID AND checking of mid surface with parent component.

After successful creating of mid surface check the model with patent component for mid surface and set the PID by selecting the mid surface also created store view for easy access.

Step 8- TOPO AND CHECKED GEOMETRIC for MID SURFACE

Performed Topo And Checked geometric and fix the error for mid surface.

Step 9- nodes length, boundary area and correction of fillet.

Assigned Length parameter to 1 and created boundary and joined the unwanted boundary

Step10- Set the given quality criteria for meshing process.

Filled the given quality criteria for meshing process

Step11- Performed mesh

Created mesh using BEST Mesh tab, after creating the mesh it shown the quality issue on mesh using , JOIN, Reshape, reconstruct, smooth and other mesh tools removed all quality issue and checked for mesh flow and triangle orientation. If any issues found on surface resolve creating new face , or resolving mid surface

Note : due to some geomatrical / tripple cone issue unable to clear quality(57 num ) issues at few points for door handle .

Submitted By

Yashvanth Kumar S K