Section Modulus calculation and optimization

PROBLEM STATEMENT: Write a program in Matlab\Octave that will simulate the pendulum motion? use, L=1 metre, m=1 kg, b=0.05. g=9.81 m/s2. Simulate the motion between 0-20 sec, for angular displacement=0,angular velocity=3 rad/sec at time t=0. SOLUTION: SIMPLE PENDULUM DEFINITION: A simple pendulum is a mechanical arrangement…

PROBLEM STATEMENT:  Write a program in Matlab to simulate the forward kinematics of a 2R Robotic Arm? Answer: Robotic Arm Robotic arms are machines that are programmed to execute a specific task or job quickly, efficiently, and extremely accurately. Generally motor-driven, they’re most often used for the…

DESIGNING OF CAR FENDER WITH THE HELP OF CONCEPT MODELLING TECHNIQUE USING ALIAS SOFTWARE AIM The aim of this project is to build a concept model of a fender of a car with the help of curves and surface generation technique using Alias software. INTRODUCTION Autodesk Alias (formerly known as Alias StudioTools)…

CONCEPT MODELLING OF CAR BUMPER USING ALIAS SOFTWARE AIM The main of this project is to create a concept model of a bumper of Abarth 500 car, using the curves and surface generation features with the help of Alias Software. INTRODUCTION Autodesk Alias (formerly known as Alias StudioTools) is a family…

CONCEPT MODELLING OF ALLOY WHEEL USING ALIAS SOFTWARE: AIM The aim of this project is to make the concept model of a vehicle with the help of image of the wheel provided as input in the concept modelling stage of a car. INTRODUCTION Autodesk Alias (formerly known as Alias StudioTools) is a family of Computer-aided…

AIM The aim of this project is to design the Body in white parts of the back door of a SUV vehicle, along with designing the reinforcements for hinges, gas stay, latch and wiper motor for the back door. INTRODUCTION The back door of the car is one of the closure commodity of a vehicle which is present at the back…

AIM The aim of the project is to create Body in white reinforcements for the roof in order to provide strength to the roof. Draft analysis will be performed on each reinforcement to check if they can be manufactured easily.  Curvature study needs to be done on each reinforcement by performing heat distortion and snowload…

AIM The aim of this project is to design the BIW of a Fender using the fender skin data as the input data and then attach mountings on the fender for attaching it with the surrounding BIW bodies. INTRODUCTION Body-in-white (BiW) is the name given to a car body’s sheet when all its components—barring moving…

SECTION MODULUS Section modulus is termed as the ratio of second moment of area and distance from N.A (Neutral axis) to the extreme fiber. Also it is the measure of strength of given member. The stress in the outermost section of beam is computed with the help of section modulus. It is indicated by S.  Section modulus…

SHEETMETAL DESIGNING OF HOOD OUTER AND INNER PANEL AIM In this project a Hood Assembly will be designed which would consist of hood outer panel, hood inner panel. The latch for the hood will also be placed at appropriate position considering that the hood should be opened and closed easily using its mechanism. The hinges…

UNDERBODY COATING In Indian road conditions, a cars underbody is most prone to corrosion. Underbody coating provides long term protection from corrosion to car’s underbody. It also protects parts like internal body panels, frame rails and other inner cavities that are not physically accessible but are prone to corrosion.…

CONDITION STATEMENT Mr. D.S. Pughazhyendhii is a married man who lives in Bangalore which is a highly crowded city. His Family comprises five members including his wife, five-year-old boy, his father, and his mother. He visits his native place Madurai which is 500kms away from Bangalore once in a month. Also, he will…

Design and modelling of Metal Bracket using NX software OBJECTIVE The main objective of this project is to design a metal bracket as per the requirement. Nx sheetmetal workbench will be used to design the sheetmetal for this purpose. INTRODUCTION Sheet Metal Fabrication is the process of forming parts from a metal sheet…

Design of a Bracket using Nx software OBJECTIVE In this project a complete bracket will be designed using sheetmetal features in NX software as per the drawing provided as the input. A draft will also be prepared which will provide all the specifications of the bracket designed. INTRODUCTION Sheet Metal Fabrication is…

Designing of an Odd Shaped Enclosure using NX OBJECTIVE In this project a sheetmetal will be generated from the input solid body and then sheetmetal features will be used on it to design the Odd Enclosure. DESIGN METHODOLOGY The steps that are used to make the desing of the Odd Enlcosure is shown below through a flowchart.…

Design of Assembly of a Box using NX software OBJECTIVE The objective of this project is to apply various advance features of sheetmetal design in NX software and then design an assembly of a box using these features. INTRODUCTION In this project advance features of sheetmetal design workbench are used to understand designing…

Design of Casing using NX workbench OBJECTIVE The main objective of this project is to understand the various basic features of sheetmetal workbench in NX software by making use of them in order to build the casing. INTRODUCTION Sheet Metal Fabrication is the process of forming parts from a metal sheet by punching, cutting,…

BOOLEAN EXERCISE CHALLENGE 4 The Project consists of: 1. Tree Structure of the component 2. Sketches along with sketch solving status of the component 3. Boolean operations perfomed on each part of the component. 4. Picture of the 3D CAD Tree Structure                   …

Solid Modelling and Drafting of components using Catia V5 software. AIM: 1. To create 3D solid models using Catia V5 software. 2. Generate draft sheets of each model with proper dimensioning 1. Solid Block Draft 2. Keyway Lever Draft 3. Base Mount Bracket Draft 4. Circular Block Draft 5. Plastic Cap Draft 6. Base Mount…

DESIGN OF CLASS A, CLASS B AND CLASS C SURFACE OF SWITCH BEZEL USING CATIA V5 Aim The aim of this project is to develop the product design of the switch bezel with the help of the class A surface following the OEM standards. Introduction Class A Class A surface is the term mainly used in automotive design industry. It…

DESIGN OF CLASS B AND CLASS C SURFACE FOR DOOR ARM REST Aim The main objective of this project is to create Class B and Class C surface for the door arm rest using catia work bench following industry standards. Instructions The below steps represent the phases in which the door arm rest console was designed 1. Bringing…

DESIGN OF ATTACHMENT FEATURE FOR APPLIQUE MODEL IN DRIVER DOOR PANEL AIM 1. Create a solid body from the class A surface of the Door Applique 2. Follow industrial design rules to create tooling axis and perform draft analysis on the Door Applique 3. Design attachment features like Locators and Heat Stakes for fixing the…

AIM The aim of the project is to create a solid body of the B pillar from the input provided as the class A surface and attach attachment features for fixing the component at appropriate position with the main component following the OEM design standards using CATIA V5 software. INTRODUCTION The B pillar is the component…

DESIGN OF CLASS B, CLASS C AND CLOSED BODY OF ARM REST, LOWER SUBSTRATE AND MAP POCKET OF A FRONT DOOR PANEL AND PLANNING A STRATERGY FOR PLACING THE ATTACHMENT FEATURES AT REQUIRED POSITION USING CATIA V5 AIM The aim of the project is to design the class B and class C surfaces of Arm rest, Lower Substrate and Map pocket…

Designing of plastic component from the given class A surface of a component Class A surface is the outside surface of a component which is visible to the customer from their naked eye. This surface needs to be aesthetically very good and should not contain any defects. The procedure followed to make the plastic component…

Design and modelling of Tail Lamp for SUV vehicle AIM The aim of the project is to build a complete assembly of tail lamp which consists of lens, reflectors, housing, wiring harness and other attachment features on the housing in order to fix the Tail Lamp with the vehicle. Catia V5 is the software used to make the complete…

Design and Modelling of Sunseeker Yacht using Solidworks   Objective 1. Design of each part of the Sunseeker Yacht as per the blueprint using Solidworks software. 2. Assemble the different parts of the Yacht using appropriate mates. 3. Developing photorealistic view of the Yacht using Solidworks Visualise software…

                                                                                     Design and Rendering…