REVIT_Usage of Elements & Properties_Week 3

1.A)

AIM: To create floor layout from week 2 project

PROCEDURE:

STEP1:

• Open week 2 project

STEP2:

• Go to architectural tab> floor > boundary lines > pick lines

STEP3:

• Property browser> edit type> change the floor
• Click on structural material to change the material
• Desired floor material should be selected
• Thickness need to be changed by clicking on duplicate

RESULT:

2.A)

AIM:

To create walls using property browser

PROCEDURE:

STEP1:

• Week 2 project file should be opened
• Click on walls > property browser> edit> walls
• Go to top constrain > level2
• Edit type> structure> to change the properties
• Materials should be selected and click on apply

RESULT:

1. ANS: according to my observation if change the levels automatically even the walls will change so that connection of walls with associated levels is beneficial
2. ANS: both are good, but I go with depth as height can be changed by constrained method

3.A)

AIM:

To copy the model elements modelled to ground floor level and paste it aligned to first floor level

PROCEDURE:

STEP1:

• Go to elevation > create level2

Step2:

• Modify tab> copy the model> clipboard
• Paste> aligned to selected level> place in 3d view

RESULT:

4.A)

AIM:

To create

1. Living room/ drawing room (15’*18’)
2. Dining room (9’*11’)
3. Bed room (9’*12’)
4. Rest room (10’*12’)
5. Kitchen (8’*10’)

PROCEDURE:

• Go to architectural tab > walls > property> interior walls > create walls in your model
• Go to architectural tab > place a component > load families > add furnitures

RESULT:

5.A)

AIM:

To add components to be included in a residential unit were inserted to the revit file

PROCEDURE:

• Go to architectural tab> place a component> load families> add furnitures

RESULT:

KITCHEN:

REST ROOM:

BED ROOM:

DINING ROOM:

f the